Bosch Security Systems User manual

1
SecuritySecurity
SecuritySecurity
Security
SystemSystem
SystemSystem
System
User’s GuideUser’s Guide
User’s GuideUser’s Guide
User’s Guide

2

3
Table of Contents
IntroductionIntroduction
IntroductionIntroduction
Introduction......................................................................................................
......................................................................................................
................................................... 7
About This Users Guide ............................... 7
Using the Command CenterUsing the Command Center
Using the Command CenterUsing the Command Center
Using the Command Center ................................................
................................................
........................ 9
Command Center Function Keys .................. 9
COMMAND ............................................ 9
ENT/YES ................................................ 9
ESC/MENU ............................................ 9
PREV (Previous) .................................. 10
NEXT.................................................... 10
Security System BasicsSecurity System Basics
Security System BasicsSecurity System Basics
Security System Basics ..........................................................
..........................................................
............................. 11
What is a Point? ........................................ 11
Controlled Points ...................................... 11
Perimeter Points .................................. 11
Interior Points ..................................... 11
24-Hour Points .................................... 12
Fire Points ........................................... 12
Non-Fire Points ................................... 12
Custom DisplayCustom Display
Custom DisplayCustom Display
Custom Display ......................................................................................
......................................................................................
........................................... 13
View Faulted or Bypassed PointsView Faulted or Bypassed Points
View Faulted or Bypassed PointsView Faulted or Bypassed Points
View Faulted or Bypassed Points ........................
........................
............ 15
Automatically Scroll Points ....................... 15
Manually Scroll Points ............................... 15
Warning Displays and Tones ...................... 16
Command Center Quiets ............................ 16
Priority of Events ....................................... 16
AlarmsAlarms
AlarmsAlarms
Alarms ......................................................................................................................
......................................................................................................................
........................................................... 17
Fire Alarms ................................................ 17
Burglary Alarms ......................................... 18
TT
TT
Trr
rr
rouble Evouble Ev
ouble Evouble Ev
ouble Eventent
entent
entss
ss
s..........................................................................................
..........................................................................................
............................................. 19
Fire Trouble Events .................................... 19
Special Fire Trouble Display ...................... 19
Non-Fire Trouble Events ............................. 19
Special System Trouble Display ................. 20
Cleared Events ..................................... 20
Entry Delay Tone and Display............... 20
Exit Delay Tone and Display ................. 21
KeystrokeChecking Tones ................... 21
Silencing an Alarm ....................................... 21
How Your System Reports Alarms ............... 21
System Commands and FunctionsSystem Commands and Functions
System Commands and FunctionsSystem Commands and Functions
System Commands and Functions ......................
......................
........... 23
Arming/DisarmingArming/Disarming
Arming/DisarmingArming/Disarming
Arming/Disarming..............................................................................
..............................................................................
....................................... 2525
2525
25
Turning the System On (Arming) ................ 25
Turning the System Off (Disarming) ........... 25

4
Turning the System On (Arming)
With a Duress Passcode ........................... 26
Turning the System On (Arming)
With Doors or Windows Open .................. 26
NOT BYPASSABLE ............................. 27
TOO MANY BYPASSD ......................... 27
TOO MANY FAULTED .......................... 27
NOT AUTHORIZED ............................... 27
MASTER ARM ?MASTER ARM ?
MASTER ARM ?MASTER ARM ?
MASTER ARM ?........................................................................................
........................................................................................
............................................ 2929
2929
29
Turn the Entire System On With Delays ...... 29
Using Master Arm ....................................... 29
MASTER ARM INST?MASTER ARM INST?
MASTER ARM INST?MASTER ARM INST?
MASTER ARM INST? ......................................................................
......................................................................
................................... 3131
3131
31
Turn the Entire System On Without Delays . 31
Using Master Arm Inst ................................ 31
PERIMETR INST ?PERIMETR INST ?
PERIMETR INST ?PERIMETR INST ?
PERIMETR INST ? ..............................................................................
..............................................................................
....................................... 3333
3333
33
Turn On the Perimeter With No Delays........ 33
Using Perimetr Inst ..................................... 33
PERIMETR DELPERIMETR DEL
PERIMETR DELPERIMETR DEL
PERIMETR DELAA
AA
AY ?Y ?
Y ?Y ?
Y ?..........................................................................
..........................................................................
..................................... 3535
3535
35
Turn On the Perimeter With Delays ............. 35
Using Perimetr Delay .................................. 35
Silence tSilence t
Silence tSilence t
Silence the The T
he The T
he Trr
rr
rouble Sounder &ouble Sounder &
ouble Sounder &ouble Sounder &
ouble Sounder &
CleCle
CleCle
Clear Tar T
ar Tar T
ar Trr
rr
rouble Displaouble Displa
ouble Displaouble Displa
ouble Displayy
yy
y............................................................
............................................................
.............................. 3737
3737
37
Using COMMAND 4 ..................................... 37
VIEW MEMORY ?VIEW MEMORY ?
VIEW MEMORY ?VIEW MEMORY ?
VIEW MEMORY ?....................................................................................
....................................................................................
.......................................... 3939
3939
39
View Event Memory .................................... 39
Using View Memory .................................... 39
WALK TEST ?WALK TEST ?
WALK TEST ?WALK TEST ?
WALK TEST ? ................................................................................................
................................................................................................
................................................ 4141
4141
41
Walk Test .................................................... 41
Using Walk Test .......................................... 41
RESET SENSORS ?RESET SENSORS ?
RESET SENSORS ?RESET SENSORS ?
RESET SENSORS ? ............................................................................
............................................................................
...................................... 4343
4343
43
Reset Sensors ............................................. 43
Using Reset Sensors ................................... 43
WW
WW
WAA
AA
ATT
TT
TCC
CC
CH MODE ?H MODE ?
H MODE ?H MODE ?
H MODE ? ........................................................................................
........................................................................................
............................................ 4545
4545
45
Watch Mode ................................................ 45
Entering Watch Mode.................................. 45
Exiting Watch Mode .................................... 46
PERIMETR PPERIMETR P
PERIMETR PPERIMETR P
PERIMETR PARAR
ARAR
ART ?T ?
T ?T ?
T ?................................................................................
................................................................................
........................................ 4747
4747
47
Partially Turn On the Perimeter ................... 47
Using Perimetr Part .................................... 47
Special AlertsSpecial Alerts
Special AlertsSpecial Alerts
Special Alerts ..............................................................................................
..............................................................................................
............................................... 4949
4949
49
Using COMMAND 7 ..................................... 50
Using COMMAND 9 ..................................... 50
Security System LimitationsSecurity System Limitations
Security System LimitationsSecurity System Limitations
Security System Limitations ..........................................
..........................................
..................... 5151
5151
51
FF
FF
Firir
irir
ire Safe Saf
e Safe Saf
e Safee
ee
ety and Evty and Ev
ty and Evty and Ev
ty and Evacuaacua
acuaacua
acuationtion
tiontion
tion ................................................
................................................
........................ 5353
5353
53
Standard DisplaysStandard Displays
Standard DisplaysStandard Displays
Standard Displays ..............................................................................
..............................................................................
....................................... 5555
5555
55
SYSTEM COMMAND ................................. 55
DISARM NOW ........................................... 55
EXIT NOW ................................................. 55

5
NO AUTHORITY ......................................... 55
NOT AUTHORIZED ..................................... 55
PERIMETR DELAY ..................................... 55
PERIMETR INSTANT.................................. 55
FIRST DISARM .......................................... 55
SySy
SySy
Syss
ss
stt
tt
tem Tem T
em Tem T
em Trr
rr
rouble Displaouble Displa
ouble Displaouble Displa
ouble Displayy
yy
yss
ss
s........................................................
........................................................
............................ 57
CALL FOR SERVICE ................................. 57
SERVC PANEL. ........................................... 57
SERVC PARAM ........................................... 57
SERVC AC FAIL ........................................ 57
SERVC BATT LOW.................................... 57
SERVC BATT MSING ................................ 57
SERVC COMM FAIL.................................. 57
SERVC KEYPAD ......................................... 57
SERVC PH LINE #1 (OR 2) ...................... 58
SERVC PRINTER ....................................... 58
SERVC PT BUS # .................................... 58
ALARM SILENCED...................................... 58
FIRE BYPASS ............................................. 58
24 HOUR BYPASS ...................................... 58
SecurSecur
SecurSecur
Security Syity Sy
ity Syity Sy
ity Syss
ss
stt
tt
tem Glosem Glos
em Glosem Glos
em Glossarsar
sarsar
saryy
yy
y....................................................
....................................................
.......................... 5959
5959
59
MaintMaint
MaintMaint
Maintenance and Serenance and Ser
enance and Serenance and Ser
enance and Servicevice
vicevice
vice ......................................................
......................................................
........................... 6363
6363
63
How to Clean the Command Center ............ 63

6

7
IntroductionIntroduction
IntroductionIntroduction
Introduction
Security systems help to secure life, property, and
investments against fire, theft, and bodily harm. The
control center is an advanced digital device that offers
a variety of features not available with other systems.
Its highly visible, back-lit display and built-in sounder
alert you to a number of system events. Stylish design
and ease-of-use make it ideal for property protection.
Your security company can program the system to meet
your individual needs. Your property is given its own
English language description that appears in the
display.
About This Users GuideAbout This Users Guide
About This Users GuideAbout This Users Guide
About This Users Guide
This users guide covers basic system commands, such
as turning the system on and off. It is designed to be
an everyday type of reference for system users. The
functions described in this guide are programmed by
your security company. Some of them may not be
included in your system. Some of the functions covered
may require you to enter your personal passcode.
Throughout this guide the ##
##
# symbol refers to a variable
numerical quantity, such as the number of points to
test or exit delay time. Messages that appear in the
display appear in this guide in CAPITAL, BOLD ANDCAPITAL, BOLD AND
CAPITAL, BOLD ANDCAPITAL, BOLD AND
CAPITAL, BOLD AND
ITALICITALIC
ITALICITALIC
ITALIC. Keys that are pressed on the keypad appear in
CAPITAL AND BOLDCAPITAL AND BOLD
CAPITAL AND BOLDCAPITAL AND BOLD
CAPITAL AND BOLD.

8

9
Using the Command Center
The security system provides quick access to functions
by pressing the COMMANDCOMMAND
COMMANDCOMMAND
COMMAND bar and one or two
additional keys.
Another way to access functions is through the
Command Menu. Access the Command Menu by
pressing the MENUMENU
MENUMENU
MENU key. Pressing the PREVPREV
PREVPREV
PREV or NEXTNEXT
NEXTNEXT
NEXT
key allows you to scroll up or down through the list of
functions programmed by your security company.
Pressing the ENTENT
ENTENT
ENT key initiates the function displayed.
To exit the Command Menu, press the ESCESC
ESCESC
ESC key. Use
the Command Menu to locate functions you don’t use
often or that don’t have a command number.
Command CentCommand Cent
Command CentCommand Cent
Command Center Fer F
er Fer F
er Function Kunction K
unction Kunction K
unction Kee
ee
eyy
yy
yss
ss
s
The command center has five function keys. These keys
are used to control the system.
COMMANDCOMMAND
COMMANDCOMMAND
COMMAND
Use the COMMANDCOMMAND
COMMANDCOMMAND
COMMAND bar in combination with one or
two numeric keys to perform a function.
ENT/YESENT/YES
ENT/YESENT/YES
ENT/YES
The ENTENT
ENTENT
ENT (Enter)/YES/YES
/YES/YES
/YES key has two functions. The first
is to complete the entry of your passcode at the
command center. Whenever a function requires that
you enter your passcode, first press the digits of the
code and then press the ENTENT
ENTENT
ENT key. The system does
not recognize your passcode until you press ENTENT
ENTENT
ENT.
The second function of the ENT/YESENT/YES
ENT/YESENT/YES
ENT/YES key is to select
the menu item displayed. Some menu items require
your personal passcode be entered before starting the
function. Remember to press ENTENT
ENTENT
ENT after entering your
passcode.
ESC/MENUESC/MENU
ESC/MENUESC/MENU
ESC/MENU
The ESCESC
ESCESC
ESC (Escape)/MENU/MENU
/MENU/MENU
/MENU key has two functions. First,
the ESC/MENUESC/MENU
ESC/MENUESC/MENU
ESC/MENU key is used to enter the Command
Menu. Press this key when at idle text to go to the first
item in the menu.
Second, pressing ESCESC
ESCESC
ESC returns to the idle display.

10
PREVPREV
PREVPREV
PREV (Previous)
When viewing a list, pressing the PREVPREV
PREVPREV
PREV key takes you
back to the previously shown item.
NEXTNEXT
NEXTNEXT
NEXT
Press the NEXTNEXT
NEXTNEXT
NEXT key to pass over the present item in a
menu or list.

11
SecurSecur
SecurSecur
Security Syity Sy
ity Syity Sy
ity Syss
ss
stt
tt
tem Baem Ba
em Baem Ba
em Basicssics
sicssics
sics
What is a Point?What is a Point?
What is a Point?What is a Point?
What is a Point?
A “point” is a detection device, or group of devices
connected to the security system. Points display
individually with custom text. The text can describe a
single door, motion sensor, smoke detector, or an area
such as UPSTAIRS or GARAGE. There are two basic
types of points, controlled and 24-hour.
Controlled PointsControlled Points
Controlled PointsControlled Points
Controlled Points
Controlled points respond to alarm conditions
depending upon whether the system is turned on
(armed) or turned off (disarmed). Controlled points
are programmed to respond instantly to alarm
conditions or to provide a delay for you to reach the
command center and disarm the system. The words
A1 # ALARMSA1 # ALARMS
A1 # ALARMSA1 # ALARMS
A1 # ALARMS appear before the point text when there
is an alarm. There are two types of controlled points,
perimeter points and interior points.
Perimeter PointsPerimeter Points
Perimeter PointsPerimeter Points
Perimeter Points
These points usually include all exterior doors and
windows of the building.
Interior PointsInterior Points
Interior PointsInterior Points
Interior Points
These points usually include interior forms of burglary
detection devices, such as carpet mats, motion sensors,
or inside doors, for example.

12
24-Hour Points24-Hour Points
24-Hour Points24-Hour Points
24-Hour Points
24-hour points are always on, even when the burglary
system is disarmed (turned off). There are two types
of 24-hour points, fire points and non-fire points.
Fire PointsFire Points
Fire PointsFire Points
Fire Points
Fire points exclusively monitor fire detection devices.
They are always armed and cannot be disarmed. Fire
points can be clearly distinguished from other non-
fire points. When there is a fire alarm, the text
identifying the point as a fire point is displayed;
pressing the PREVPREV
PREVPREV
PREV key causes the summary display,
such as A1 # FIRE ALARMA1 # FIRE ALARM
A1 # FIRE ALARMA1 # FIRE ALARM
A1 # FIRE ALARM to appear in the display
and pressing NEXTNEXT
NEXTNEXT
NEXT displays any other points in alarm.
Fire alarms have a unique audible warning signal.
Non-Fire PointsNon-Fire Points
Non-Fire PointsNon-Fire Points
Non-Fire Points
Non-fire points are always armed and cannot be
disarmed.

13
CusCus
CusCus
Custt
tt
tom Displaom Displa
om Displaom Displa
om Displayy
yy
y
“At an idle state” means that the system is not currently performing a function entered by a user and there are
no active alarms. There are three idle states:
• Turned on (Armed)
• Turned off (Disarmed) with no points faulted (doors or windows open) in the area
• Turned off with faulted points (doors or windows open) in the area
This guide uses the default idle state displays for examples of these idle states. Your security company may
program custom text for the idle displays in your system. The custom text and the default text for the three
system idle displays follow.
Custom DisplaysCustom Displays
Custom DisplaysCustom Displays
Custom Displays Default Text / FunctionDefault Text / Function
Default Text / FunctionDefault Text / Function
Default Text / Function
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREAAREA
AREAAREA
AREA__
__
_IS ONIS ON
IS ONIS ON
IS ON
Indicates the area is turned on (armed) and ready to detect intruders.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREAAREA
AREAAREA
AREA __
__
_ IS OFFIS OFF
IS OFFIS OFF
IS OFF
Indicates the area is turned off (disarmed). 24-hour points remain
armed.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREAAREA
AREAAREA
AREA __
__
_ NOT READYNOT READY
NOT READYNOT READY
NOT READY
Indicates that the area is turned off, but not ready to arm. Perimeter
and/or interior points are faulted (doors or windows open).

14

15
If there are bypassed points, AREA 1 ## BYPASAREA 1 ## BYPAS
AREA 1 ## BYPASAREA 1 ## BYPAS
AREA 1 ## BYPAS
(## = total number of bypassed points) is
displayed, followed by the point text
descriptions of the bypassed points. These
displays scroll at the rate of 2 seconds each. If
there are no faulted or bypassed points, the
displays do not appear. Instead, the display
shows NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPAS.
3. The display returns to idle text after scrolling
through the faulted and bypassed point
information. Press ESCESC
ESCESC
ESC to stop the display from
scrolling.
To manually scroll faulted or bypassedTo manually scroll faulted or bypassed
To manually scroll faulted or bypassedTo manually scroll faulted or bypassed
To manually scroll faulted or bypassed
points:points:
points:points:
points:
1. Ensure the display shows idle text.
2. Press the NEXTNEXT
NEXTNEXT
NEXT key repeatedly to display the
faulted and bypassed point information. If there
are no faulted or bypassed points the display
shows NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPAS.
3. Return to idle text at any time by pressing ESCESC
ESCESC
ESC.
To properly arm the system, all the doors and windows
in the system must be in the normal (not faulted)
condition. Viewing the faulted points helps you find
faulted points and correct them so proper arming is
possible.
The command center offers two ways of displaying
faulted and bypassed point information. The first
causes the faulted or bypassed point information to
scroll automatically through the display. The second
allows you to manually scroll through each individual
point description.
To automatically scroll faulted or bypassedTo automatically scroll faulted or bypassed
To automatically scroll faulted or bypassedTo automatically scroll faulted or bypassed
To automatically scroll faulted or bypassed
points:points:
points:points:
points:
1. Ensure the display shows idle text.
2. Press any number key. If there are faulted points,
AREA 1 ## FAULTAREA 1 ## FAULT
AREA 1 ## FAULTAREA 1 ## FAULT
AREA 1 ## FAULT (## = total number of faulted
points) is displayed first. This display is
followed by the point text descriptions of the
faulted points.
VV
VV
Vieie
ieie
iew Fw F
w Fw F
w Faultault
aultault
aultee
ee
ed or Bypad or Bypa
d or Bypad or Bypa
d or Bypass
ss
ssese
sese
sed Pd P
d Pd P
d Pointoint
ointoint
ointss
ss
s

16
WW
WW
Warar
arar
arning Displaning Displa
ning Displaning Displa
ning Displayy
yy
ys and Ts and T
s and Ts and T
s and Toneone
oneone
oness
ss
s
The command center emits one of several distinct tones
and displays custom text to alert you to system events.
Additional bells or sirens may also be connected to
the system. Bells or sirens mounted on the exterior of
the premises alert neighbors to emergencies and
provide an audible guide for police and fire fighters.
Command Center Quiets forCommand Center Quiets for
Command Center Quiets forCommand Center Quiets for
Command Center Quiets for
KK
KK
Kee
ee
eyy
yy
yss
ss
strtr
trtr
trokok
okok
okee
ee
ess
ss
s
Pressing any key on the keypad lights the keys and quiets
any warning tones. If another key is not pressed within
20 seconds, the keypad lights go out and the warning
tones resume.
Priority of EventsPriority of Events
Priority of EventsPriority of Events
Priority of Events
If more than one event occurs, the system sorts them
into one of four groups. The groups (highest priority
first) are: Fire Alarms, Burglary Alarms, Fire Troubles,
and Non-Fire Troubles.
The group with the highest priority scrolls first.
Descriptions of the tones and displays for each group
and instructions for silencing the tones are included in
the descriptions that follow.

17
AlarmsAlarms
AlarmsAlarms
Alarms
FF
FF
Firir
irir
ire Alare Alar
e Alare Alar
e Alarmsms
msms
ms
Fire alarms are the highest priority events. When a fire
point activates, the control center emits a pulsating
high-pitched fire tone. Evacuate all occupants and
investigate for smoke or fire. Ensure that all occupants
know the difference between the burglary tone and the
fire tone. The tone sounds for the time set by your
security company.
The display shows the point text of the first point that
went into fire alarm. Press the NEXTNEXT
NEXTNEXT
NEXT key to manually
display additional points (if any) that went into alarm.
Events scroll from the oldest to the newest.
Silencing Fire AlarmsSilencing Fire Alarms
Silencing Fire AlarmsSilencing Fire Alarms
Silencing Fire Alarms
Entering a personal passcode with the proper authority
level silences a fire alarm and disarms the system if it
is armed. The system now displays ALARM SILENCEDALARM SILENCED
ALARM SILENCEDALARM SILENCED
ALARM SILENCED
and then the number of points in alarm (A1 ## FIREA1 ## FIRE
A1 ## FIREA1 ## FIRE
A1 ## FIRE
ALARMALARM
ALARMALARM
ALARM) and the custom text of all the points in alarm,
in the order of occurrence. The system can be
programmed so that some fire alarms cannot be
silenced until the fire event clears. Entering COMMAND
4 clears the scrolling point text from the display. The
ALARM SILENCEDALARM SILENCED
ALARM SILENCEDALARM SILENCED
ALARM SILENCED message continues to scroll as a
reminder that it is still possible to view the text of the
points in alarm by using the View Memory function.
See VIEW MEMORY ?VIEW MEMORY ?
VIEW MEMORY ?VIEW MEMORY ?
VIEW MEMORY ? (COMMAND 40) for more
information. To clear the event memory and remove
the ALARM SILENCEDALARM SILENCED
ALARM SILENCEDALARM SILENCED
ALARM SILENCED message from the display, enter
a valid passcode and press the ESCESC
ESCESC
ESC key, or re-arm the
area.
If a fire trouble still exists, the display shows FIREFIRE
FIREFIRE
FIRE
TROUBLETROUBLE
TROUBLETROUBLE
TROUBLE. To remove this display, the fire point(s)
must be returned to normal. If you wish to review
cleared events, use COMMAND 4 0.

18
BurBur
BurBur
Burglarglar
glarglar
glary Alary Alar
y Alary Alar
y Alarmsms
msms
ms
Burglary alarms are the second priority. When a burglary
point activates while the system is armed, the
command center emits a steady high-pitched burglary
tone. The tone sounds for the time set by your security
company.
The keypad display shows the number of burglary points
activated (A1 ## ALARMSA1 ## ALARMS
A1 ## ALARMSA1 ## ALARMS
A1 ## ALARMS) and then custom text for
each activated point. Press NEXTNEXT
NEXTNEXT
NEXT to manually scroll
the list if you wish. Events scroll from the oldest to
the newest.
Silencing BurSilencing Bur
Silencing BurSilencing Bur
Silencing Burglarglar
glarglar
glary Alary Alar
y Alary Alar
y Alarmsms
msms
ms
Entering a personal passcode with the proper authority
level silences a burglary alarm and disarms the system
if it is armed. The system now displays ALARMALARM
ALARMALARM
ALARM
SILENCEDSILENCED
SILENCEDSILENCED
SILENCED and then the number of points in alarm
(A1 ## ALARMSA1 ## ALARMS
A1 ## ALARMSA1 ## ALARMS
A1 ## ALARMS) and the custom text of all the points
in alarm, in the order of occurrence. Entering
COMMAND 4 clears the scrolling point text from the
display. The ALARM SILENCEDALARM SILENCED
ALARM SILENCEDALARM SILENCED
ALARM SILENCED message continues
to scroll as a reminder that it is still possible to view
the text of the points in alarm by using the View Memory
function.
See VIEW MEMORY?VIEW MEMORY?
VIEW MEMORY?VIEW MEMORY?
VIEW MEMORY? (COMMAND 4 0) for more
information. To clear the event memory and remove
the ALARM SILENCEDALARM SILENCED
ALARM SILENCEDALARM SILENCED
ALARM SILENCED message from the display, enter
a valid passcode and press the ESCESC
ESCESC
ESC key, or re-arm the
area.

19
Note:Note:
Note:Note:
Note: Some fire points, when tripped, display FIREFIRE
FIREFIRE
FIRE
TROUBLETROUBLE
TROUBLETROUBLE
TROUBLE for a preset amount of time. If no
other fire activity is detected, this condition
automatically clears. If the condition remains
or another fire detector is tripped, a fire alarm
occurs.
Viewing Fire TroublesViewing Fire Troubles
Viewing Fire TroublesViewing Fire Troubles
Viewing Fire Troubles
After a passcode is entered, the text of the fire point in
trouble continues to scroll through the display. Press
NEXTNEXT
NEXTNEXT
NEXT to scroll displays manually. Events scroll from
oldest to newest.
NN
NN
Non-Fon-F
on-Fon-F
on-Firir
irir
ire Te T
e Te T
e Trr
rr
rouble Evouble Ev
ouble Evouble Ev
ouble Eventent
entent
entss
ss
s
When a trouble event such as an AC failure occurs, the
command center can be programmed to emit three
warble tones, then a pause (repeatedly).
FF
FF
Firir
irir
ire Te T
e Te T
e Trr
rr
rouble Evouble Ev
ouble Evouble Ev
ouble Eventent
entent
entss
ss
s
When a fire trouble occurs, the command center emits
three warble tones, then a pause (repeatedly).
The system displays the number of fire points with
troubles (A1 ## FIRE TRBLEA1 ## FIRE TRBLE
A1 ## FIRE TRBLEA1 ## FIRE TRBLE
A1 ## FIRE TRBLE) and then custom text
for each point.
Silencing Fire TroublesSilencing Fire Troubles
Silencing Fire TroublesSilencing Fire Troubles
Silencing Fire Troubles
Entering a personal passcode with the proper authority
level silences a fire trouble and disarms the panel if it
is armed. To clear the scrolling trouble message from
the display, enter COMMAND 4COMMAND 4
COMMAND 4COMMAND 4
COMMAND 4. To review the cleared
troubles, enter COMMAND 4 0COMMAND 4 0
COMMAND 4 0COMMAND 4 0
COMMAND 4 0.
Special Fire Trouble DisplaySpecial Fire Trouble Display
Special Fire Trouble DisplaySpecial Fire Trouble Display
Special Fire Trouble Display
If you silence the command center or clear a trouble
for a Fire Point from the display and the fire point
remains in trouble, FIRE TROUBLEFIRE TROUBLE
FIRE TROUBLEFIRE TROUBLE
FIRE TROUBLE appears in the
keypad’s display. FIRE TROUBLEFIRE TROUBLE
FIRE TROUBLEFIRE TROUBLE
FIRE TROUBLE remains in the
display until the condition causing the trouble is
cleared.
TT
TT
Trr
rr
rouble Evouble Ev
ouble Evouble Ev
ouble Eventent
entent
entss
ss
s

20
If the system is armed, the display shows the number
of non-fire trouble (A1 ## TROUBLESA1 ## TROUBLES
A1 ## TROUBLESA1 ## TROUBLES
A1 ## TROUBLES ) and then
custom text for each activated point.
Silencing Non-Fire Trouble EventsSilencing Non-Fire Trouble Events
Silencing Non-Fire Trouble EventsSilencing Non-Fire Trouble Events
Silencing Non-Fire Trouble Events
Entering a personal passcode with the proper authority
level silences a trouble and disarms the panel if it is
armed. If you wish to clear the scrolling trouble
message from the display, enter COMMAND 4. If you
wish to review these cleared troubles, use COMMAND
40.
Viewing Non-Fire Trouble EventsViewing Non-Fire Trouble Events
Viewing Non-Fire Trouble EventsViewing Non-Fire Trouble Events
Viewing Non-Fire Trouble Events
After a passcode is entered, the text of the activated
points continues to scroll through the display. Press
NEXTNEXT
NEXTNEXT
NEXT to scroll displays manually. Events scroll from
oldest to newest. Use COMMAND 4 to clear messages
from the display.
Special SySpecial Sy
Special SySpecial Sy
Special Syss
ss
stt
tt
tem Tem T
em Tem T
em Trr
rr
rouble Displaouble Displa
ouble Displaouble Displa
ouble Displayy
yy
y
SERVC AC FAILSERVC AC FAIL
SERVC AC FAILSERVC AC FAIL
SERVC AC FAIL and SERVC BATT LOWSERVC BATT LOW
SERVC BATT LOWSERVC BATT LOW
SERVC BATT LOW are examples
of system trouble displays. These displays appear on
all keypads in the system. All system trouble displays
begin with SERVCSERVC
SERVCSERVC
SERVC. See Standard Displays for a
description of each system trouble display. Entering
your passcode or a COMMAND 4 silences a system
trouble tone, but the SERVC display does not clear until
the faulted condition is corrected.
Cleared Events Are Not LostCleared Events Are Not Lost
Cleared Events Are Not LostCleared Events Are Not Lost
Cleared Events Are Not Lost
If you clear the alarms and troubles from the display,
you can still view all the events that occurred since
thelast time the system was armed by using COMMAND
40 (View Event Memory).
Entry Delay Tone and DisplayEntry Delay Tone and Display
Entry Delay Tone and DisplayEntry Delay Tone and Display
Entry Delay Tone and Display
When you enter an armed system through a point
programmed for entry delay, the command center emits
a repeating tweedle tone and displays DISARM NOWDISARM NOW
DISARM NOWDISARM NOW
DISARM NOW
as a reminder to turn off the security system.
Failure to turn off the security system before the entry
delay time expires may sound the burglary tone and
could result in an alarm report being sent to the
security company.