Boser HS-6200 User manual

HS-6200/6600
BX Pentium
®
-II L/VGA LAN
¡EHalf Size¡EAll-in-one¡EVGA CRT-LCD Interface¡E
¡ESupports DMA33¡EWDT¡EDOC¡ELAN¡EUSB¡EIrDA¡E
¡EPISA Bus Industrial Single Board Computer¡E
HS-6200L/6600L
BX Pentium
®
-II LAN I.S.B.
¡EHalf Size¡EAll-in-one¡E
¡ESupports DMA33¡EWDT¡EDOC¡ELAN¡EUSB¡EIrDA¡E
¡EPISA Bus Industrial Single Board Computer¡E
HS-6200V/6600V
BX Pentium
®
-II L/VGA I.S.B.
¡EHalf Size¡EAll-in-one¡EVGA CRT-LCD Interface¡E
¡ESupports DMA33¡EWDT¡EDOC¡EUSB¡EIrDA¡E
¡EPISA Bus Industrial Single Board Computer¡E
HS-6200P/6600P
BX Pentium
®
-II I.S.B.
¡EHalf Size¡EAll-in-one¡E
¡ESupports DMA33¡EWDT¡EDOC¡EUSB¡EIrDA¡E
¡EPISA Bus Industrial Single Board Computer¡E

Copyrights
This manual is copyrighted and all rights are reserved. It is not allow any non
authorization in copied, photocopied, translated or reduced to any electronic or
machine readable in whole or in part form without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
The proprietary information contains in this document is protected by the copyright.
All rights are reserved. It is not allow any non authorization in copied, photocopied,
translated or reduced to any electronic or machine readable in whole or in part form
without prior written consent from the manufacturer except for copied retained by
the purchaser for backup purposes.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to
update the information contained herein.
Trademarks
IBM PC is a registered trademark of International Business Machines Corporation.
Intel®is a registered trademark of Intel Corporation.
AWARD is a registered trademark of AWARD International Inc.
ISB is a registered trademark of Boser Technology Co., Ltd.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 1999
All Rights Reserved.
User Manual edition 1.0, Jul.29.1999

Contents • i
Contents
HS-6200/6600........................................................................................1
HS-6200L/6600L....................................................................................1
HS-6200V/6600V...................................................................................1
HS-6200P/6600P...................................................................................1
GENERAL INFORMATION .........................................................................3
1.1 MAJOR FEATURES .................................................................................4
1.2 SPECIFICATIONS ....................................................................................5
1.3 DELIVERY PACKAGE...............................................................................7
HARDWARE INSTALLATION.....................................................................8
2.1 CAUTION OF STATIC ELECTRICITY..........................................................8
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION............................9
2.3 HS-6200/6600’S LAYOUT ...................................................................10
2.4 QUICK LISTING OF JUMPERS ................................................................10
2.5 QUICK LISTING OF CONNECTORS.........................................................11
2.6 JUMPER SETTING DESCRIPTION...........................................................12
2.7 MANUFACTURE DEFAULT SETTING ......................................................13
2.8 SETTING THE BUS-CLOCK FREQUENCY ...............................................13
2.9 FREQUENCY MULTIPLIER SETTING.......................................................13
2.10 SETTING THE RTC CONFIGURATION..................................................15
2.11 SYSTEM MEMORY DRAM..................................................................15
2.12 SETTING THE FLAT PANEL VOLTAGE..................................................15
2.13 WATCH-DOG TIMER ..........................................................................16
2.14 PCI VGA CONTROLLER....................................................................18
2.15 DISKONCHIPADDRESS SETTING....................................................18
CONNECTION ............................................................................................19
3.1 POWER AND FAN CONNECTORS.........................................................19
3.2 IDE'S LED, KEY-LOCK AND RESET BUTTON........................................20
3.3 EXTERNAL SPEAKER............................................................................20
3.4 PCI E-IDE DRIVE CONNECTOR...........................................................21
3.5 PS/2 POWER ON/OFF CONTROL.......................................................22
3.6 PARALLEL PORT CONNECTOR..............................................................22

ii • Contents
3.7 THE FLOPPY DISK DRIVE CONNECTOR ................................................23
3.8 SERIAL PORTS CONNECTORS..............................................................24
3.9 KEYBOARD CONNECTORS....................................................................25
3.10 PS/2 MOUSE 6-PIN MINI-DIN CONNECTOR.......................................25
3.11 VGA CRT AND LCD CONNECTORS..................................................26
3.12 IR CONNECTOR.................................................................................27
3.13 USB PORTS CONNECTOR.................................................................28
3.14 LAN INTERFACE CONNECTOR...........................................................28
AWARD BIOS SETUP ...............................................................................29
4.1 MAIN MENU .........................................................................................30
4.2 STANDARD CMOS SETUP...................................................................31
4.3 BIOS FEATURES SETUP......................................................................32
4.4 CHIPSET FEATURES SETUP .................................................................33
4.5 INTEGRATED PERIPHERALS..................................................................34
4.6 POWER MANAGEMENT SETUP .............................................................35
A BRIEF INFORMATION OF 10/100 BASED-T LAN.............................36

3
Chapter-1
General Information
The HS-6200/6600 is a bus-100MHz Intel®BX chipset design PISA/ISA bus
Pentium®II/III Industrial Single Board (I.S.B.) CPU card with features
combine together to make it an ideal all-in-one industrial single board
computer, enhanced I/O effects with LAN and VGA CRT-LCD interface.
With onboard DMA33 of mode 4 to IDE drive interface architecture, the
HS-6200/6600 supports with maximum 33.3 MB/sec in data transfer rating
to 2 pieces IDE drive connection. Design with Intel®82443 BX core logic
chipset supports all series Pentium®II/III operating at 233MHz, 266MHz,
300MHz, 333MHz, 400MHz and 650MHz. The on-board INTEL®69000
VGA chipset whick has 2 MB VGA RAM supports up to 1280 x 1024
256 colors display resolution. And it also provides one internal 50-pin
connector for various type of the LCD Panel connection.
The advanced ISA bus backplane system of HS-6200/6600 allows user
could easily obtain one 16-bit ISA slot. The HS-6200/6600 provides with two
pieces 168-pin DIMM sockets support up to 1GBytes of main system
memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission. You can also use the DOS version
of the "DiskOnChip" socket by issuing commands from the DOS prompt
without the necessity of other software supports up to 144MB.
The HS-6200/6600 features includes one Intel®82558B 100-Based LAN
chipset on-board. Also has one external RJ-45 connector on board for user’s
LAN application.
If a non-expect program cause halts, the onboard watchdog timer will
automatically reset the CPU or generate an interrupt. The watchdog is
designed with in hardware only and doesn’t need any arithmetical functions
of a real-time clock chip. This ensures the reliability in an unmanned or
standalone system.

4
1.1 Major Features
üISA bus supported for HS-6200.
PISA bus supported for HS-6600.
üOne axial-horizontal type Slot-1 socket for Intel®Pentium®II 233
¡ã650 MHz Processors.
üIntel®82443 BX chipset.
üTwo pieces DIMM sockets supports memory up to 1 GB.
üFast PCI DMA33 controller supports two IDE drives include large
hard disks, CD-ROM and tape backup etc.
üPnP I/O address & IRQ selection
üOn-board Intel® 82558B 100-Based LAN chipset.
üTwo high-speed RS-232 serial ports with 16C550 UART 16-byte
FIFO.
üOne enhanced bi-directional parallel port supports SPP/EPP/ECP.
üOn-board PS/2 Keyboard and PS/2 Mouse connector.
üOn-board INTEL®69000 SVGA adapter.
üOn-board one 50-pin for various types LCD Panel connection.
üDiskOnChipSocket supports memory size up to 144 MB.
üOn-board two USB ports and one IrDA port.
üBuild-in one industrial WDT Watch-Dog-Timer.
üAWARD PnP Y2K Flash BIOS.

5
1.2 Specifications
²CPU: One piece Intel® Pentium®II 233/266/300/333/400/450/650
MHz.
²Bus interface: ISA bus
²Chipset: Intel®82443 BX with bus-100MHz frequency.
²Data bus: 64-bit
²Processing ability: 64-bit
²CRT-LCD SVGA Controller: INTEL®69000 chipset with on-chip
2MB memory supports CRT up to 1280x1024 256 colors. Provides
internal 50-pin LCD connector.
²LAN Interface: Intel®82558B 100-Based LAN provides 10-Based or
100-Based ability.
²PCI Enhanced IDE Interfaces: Two IDE drives supports modes 3&4
with DMA33 function provide data transfer rate up to 33MB/Sec.
²RAM memory: Two pieces 168-pin DIMM sockets provide up to 1
GBytes.
²Cache memory: Slot-1 socket supports Intel's Pentium®II/III CPU
with build-in 512KB Pipeline burst cache memory.
²Floppy disk drive interface: Supports up to two floppy disk drives.
²Parallel port: One bi-directional parallel port. Supports
SPP/ECP/EPP.
²Serial ports: Two RS-232 ports. Both use 16C550 UART with 16-
byte FIFO.
²BIOS: AWARD PnP Y2K Flash BIOS.
²Watchdog timer: Hardware circuit can be set by 1, 2, 10, 20, 110, or
220 seconds period Reset or NMI were generated when CPU did not
periodically trigger the timer.
²DMA channels: 7

6
²Interrupt levels: 15
²Keyboard: 6-pin mini DIN connector or 5-pin header supports
standard PC/AT keyboard.
²Mouse: 6-pin mini DIN connector support PS/2 type mouse.
²USB: Supports 2 USB header.
²IR interface: Supports one lrDA TX/RX header.
²Flash memory Disk: Socket for DiskOnChip™(DOC), support up to
144MB Flash memory disk.
²Extra Power Input: Provides one 4-PIN extra DC +5V/+12V power
input connector.
²CMOS: Real-time clock/calendar and battery backup by DS12B887
or equivalent device.
²Power supply voltage: +5V (4.75 to 5.25V), +12V.
²Max. Power requirement: +5V @12A(266MHz), +12V@20mA.
²Operating temperature: 0-55°C (CPU need cooler)
²Board size: 7.3"(L) x 5" (W) (158mm x 127mm)
The HS-6200/6600 provides with VGA CRT-LCD Interface, supports
DMA33, WDT, DOC, LAN, USB and IrDA.
The HS-6200/6600V provides with VGA CRT-LCD Interface, supports
DMA33, WDT, DOC, USB and IrDA.(A version without LAN of HS-
6200/6600).
The HS-6200/6600L provides with support DMA33, WDT, DOC, LAN, USB
and IrDA.(A version without VGA CRT-LCD on-board of HS-6200/6600).
The HS-6200/6600P provides with support DMA33, WDT, DOC, USB and
IrDA.(A version without LAN and VGA CRT-LCD on-board of HS-
6200/6600 ).

7
1.3 Delivery Package
The delivery package of HS-6200/6600 includes all following items:
RPISA Bus supported.( HS-6200 )
RISA Bus supported.( HS-6600 )
ROne Printer Ports Bracketed Flat Cable
ROne COM Ports Bracketed Flat Cable
ROne IDE port Flat Cable
ROne FDD port Flat Cable
ROne PS/2 to Standard DIN type Keyboard Transfer Cable
RUtility Diskette
RUser’s Manual
Please contact with your dealer if any of these items are missing or
damaged when purchasing. And please keep all parts of the
delivery package with packing materials in case of you want to ship
or store the product in feature.
There are a few differences with in different versions of HS-
6200/6600, please also check the dealer.

8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware
of HS-6200/6600. At first, please follow up sections 1.3, 2.1 and 2.2
in check the delivery package and carefully unpacking. Following
after, the jumpers setting of switch, watchdog timer and the
DiskOnChipaddress selection etc.
2.1 Caution of Static Electricity
The HS-6200/6600 has been well package with an anti-static bag in
protect its sensitive computer components and circuitry from the
damage of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER
SENSITIVE COMPONENTS WITHOUT ALL NECESSARY
ANTI-STATIC PROTECTION.
You should follow the steps as following to protect the board in
against the static electric discharge whenever you handle the board:
1.Please use a grounding wrist strap on whoever needs to handle
the HS-6200/6600. Well clip the ALLIGATOR clip of the strap to
the end of the shielded wire lead from a grounded object. Please
put on and connect the strap before handle the HS-6200/6600 for
harmlessly discharge any static electricity through the strap.
2.Please use anti-static pad for put any components or parts or tools
on the pad whenever you work on them outside the computer.
You may also in use the anti-static bag instead the pad. Please
ask from your local supplier in help up your necessary parts on
anti-static requirement.

9
2.2 Caution on Unpacking and Before Installation
First of all, please follow with all necessary steps of section 2.1 in
protection the HS-6200/6600 from electricity discharge. With refer
to section 1.3, please check the delivery package again with
following steps:
1.Unpacking the HS-6200/6600, keep well storage of all packing
material, manual and diskette etc. if has.
2.Is there any components lose or drop from the board? DO NOT
INSTALL IF HAPPENED.
3.Is there any visual damaged of the board? DO NOT INSTALL IF
HAPPENED.
4.Well check from your optional parts (i.e. CPU, SRAM, DRAM,
ROM-Disk etc.) for completed setting all necessary jumpers
setting to jumper pin-set and CMOS setup correctly. Please also
reference to all information of jumpers setting in this manual.
5.Well check from your external devices (i.e. Add-On-Card, Driver
Type etc.) for completed add-in or connection and CMOS setup
correctly. Please also reference to all information of connector
connection in this manual.
6.Please keep all necessary manual and diskette in a good
condition for your necessary re-installation if you change your
Operating System or whatever needs.

10
2.3 HS-6200/6600’s Layout
HS-6200/6600’s Layout
2.4 Quick Listing of Jumpers
JP1 ( 1-2,7-8 ON ) ¡XFrequency Multiplier setting of System Bus to
Processor Core
JP3 ( 1-2 OFF ) ¡XManufacture Default Setting
JP4 ( 5-6 ON ) ¡XTime scale of Watch-Dog Timer
JP5 ( 1-2 OFF ) ¡XBus-Clock Select
JP6 ( 1-2 ON ) ¡XDiskOnChip™Address setting
JP7 ( 1-2 OFF ) ¡XRTC Clear Jumper
JP8 ( 1-2 ON ) ¡XWATCHDOG Active Select
JP10 ( 1-2 OFF ) ¡XBus-Clock Select
JP11 ( 2-3 ON ) ¡XFlat Panel Voltage Select

11
2.5 Quick Listing of Connectors
BZ1: ON-BOARD BUZZER
CN1: FAN POWER CONNECTOR
CN2: POWER 4-PIN CONNECTOR
CN3: SPEAKER CONNECTOR
CN4: KEYLOCK CONNECTOR
CN5: PS/2 POWER SWITCH CONNECTOR
CN6: 1st IDE CONNECTOR
CN7: HDD LED CONNECTOR
CN10: FDD CONNECTOR
CN11: IR CONNECTOR (5-PIN)
CN12: PARALLEL PORT CONNECTOR
CN13: COM1 (HEADER 5x2)
CN14: INTERNAL VGA LCD CONNECTOR (HEADER 25x2)
CN15: INTERNAL 5-PIN KEYBOARD CONNECTOR
CN16: COM2 (HEADER 5x2)
CN17: 100-BASED LAN CONNECTOR
CN18: EXTERNAL MINI-DIN PS/2 MOUSE CONNECTOR
CN19: EXTERNAL VGA CONNECTOR (DB15)
CN20: EXTERNAL MINI-DIN PS/2 KEYBOARD CONNECTOR
CN21: EXTERNAL COM1 CONNECTOR (DB9) (HS-6200P/6600P
only)
CN22: EXTERNAL COM2 CONNECTOR (DB9) (HS-6200P/6600P
only)
D1: ON-BOARD POWER-ON LED INDICATOR
JP2: RESET PIN
JP9: USB PORTS CONNECTOR
LE1: 10T LED INDICATOR OF LAN
LE2: 100T LED INDICATOR OF LAN
LE3: ACTIVE LED INDICATOF OF LAN
U5: DiskOnChip™SOCKET

12
2.6 Jumper Setting Description
A jumper pin-set is ON as a shorted circuit with a plastic cap inserted
over two pins. A jumper pin-set is OFF as a open circuit with a
plastic cap inserted over one or no pin(s) between pins. The below
figure 2.2 shows the examples of different jumper pin-set setting as
ON or OFF in this manual.
Figure 2.2
All jumper pin-set already has its default setting with the plastic cap
inserted as ON, or without the plastic cap inserted as OFF. The
default setting may reference in this manual with a " * " symbol in
front of the selected item.

13
2.7 Manufacture Default Setting
The following shows the manufacture’s default setting, no change
allows.
lDefault Setting of JP3:
Manufacture Setting JP3
default setting * OFF
2.8 Setting the Bus-Clock Frequency
The HS-6200/6600 provides all necessary by jumper setting in
using Bus-Clock frequency as the system bus clocking with JP5 and
HP10 setting as following:
lBus-Clock Frequency Setting of JP5 and JP10:
Bus-Clock Frequency JP10 JP5
* 100MHz OFF OFF
66MHz ON ON
2.9 Frequency Multiplier Setting
The HS-6200/6600 provides JP1 for define the selection of the
Frequency Multiplier value of system bus to processor core in
following table:
lFrequency Multiplier Setting of JP1:
Frequency Multiplier:
( System Bus to Processor Core ) 7-8 5-6 3-4 1-2 Bus-
66MHz Bus- 100MHz
3x ON ON OFF ON 200 300
4x ON ON ON OFF 266 400
5x ON ON OFF OFF 333 500
2.5x ON OFF ON ON 166 250
* 3.5x ON OFF OFF ON 233 * 350
4.5 ON OFF ON OFF 300 450
5.5x ON OFF ON ON 366 550
7.0x ON OFF OFF ON 466 700
The bus-clock is setting by JP5 and JP10. The default setting is for Intel®

14
Pentium®II/III 350MHz processor.

15
2.10 Setting the RTC Configuration
The HS-6200/6600 provides a setting for the selection of the RTC
Clear Jumper by JP7 setting as following:
lCMOS Setting of JP7:
CMOS Clear Jumper JP7
Normal * OFF
Clear CMOS ON
2.11 System Memory DRAM
The HS-6200/6600 provides a wide range on-board DRAM memory
by two pieces DIMM sockets (DIMM-1, DIMM-2) request the access
time should meet PC-100 standard. The maximum capacity of the
on board memory is 1GBytes.
See the figure on section 2.3 for get the identifying the banks.
2.12 Setting the Flat Panel Voltage
The HS-6200/6600 provides a setting for the selection of the
working voltage of individual flat panel by JP11 setting as following:
lFlat Panel Voltage Selecting of JP11:
Panel’s Working Voltage JP11
5.0 V * 2-3
3.3 V 1-2
Please contact with your flat panel supplier for make sure a correct
Panel’s Working Voltage. Any mistake will cause defect to your flat
panel.

16
2.13 Watch-Dog Timer
There are three access cycles of Watch-Dog Timer as Enable,
Refresh and Disable. The Enable cycle should proceed by READ
PORT 443H. The Disable cycle should proceed by READ PORT
043H. A continue Enable cycle after a first Enable cycle means
Refresh.
Once if the Enable cycle activity, a Refresh cycle is request before
the time-out period for restart counting the WDT Timer's period.
Otherwise, it will assume that the program operation is abnormal
when the time counting over the period preset of WDT Timer. A
System Reset signal to start again or a NMI cycle to the CPU comes
if over.
The JP8 is using for select the active function of watch-dog timer in
disable the watch-dog timer, or presetting the watch-dog timer
activity at the reset trigger, or presetting the watch-dog timer activity
at the NMI trigger.
lJP8 : Watch-Dog Active Type Setting
JP8 DESCRIPTION
*1-2 System Reset
2-3 Active NMI
OFF disable Watch-dog timer
lJP4 : WDT Time - Out Period
PERIOD 1-2 3-4 5-6 7-8
*1 sec OFF OFF ON OFF
2 sec OFF OFF ON ON
10 sec OFF ON OFF OFF
20 sec OFF ON OFF ON
110 sec ON OFF OFF OFF
220 sec ON OFF OFF ON

17
The Watch-dog timer is disabled after the system Power-On. The
watch-dog timer can be enabled by a Enable cycle with reading the
control port (443H), a Refresh cycle with reading the control port
(443H) and a Disable cycle by reading the Watch-dog timer disable
control port (043H). After a Enable cycle of WDT, user must
constantly proceed a Refresh cycle to WDT before its period setting
comes ending of every 1, 2, 10, 20, 110 or 120 seconds which pre-
setting by JP4. If the Refresh cycle does not active before WDT
period cycle, the on board WDT architecture will issue a Reset or
NMI cycle to the system.
The Watch-Dog Timer is controlled by two I/O ports.
443H I/O Read The Enable cycle.
443H I/O Read The Refresh cycle.
043H I/O Read The Disable cycle.
The following sample programs showing how to Enable, Disable and
Refresh the Watch-dog timer:
WDT_EN_RF EQU 0443H
WDT_DIS EQU 0043H
WT_Enable PUSH AX ; keep AX DX
PUSH DX
MOV DX,WDT_EN_RF ; enable the watch-dog timer
IN AL,DX
POP DX ; get back AX, DX
POP AX
RET
WT_Rresh PUSH AX; keep AX, DX
PUSH DX
MOV DX,WDT_ET_RF ; refresh the watch-dog timer
IN AL,DX
POP DX ; get back AX, DX
POP AX
RET
WT_DISABLE PUSH AX
PUSH DX
MOV DX,WDT_DIS ; disable the watch-dog timer
IN AL,DX
POP DX ; get back AX, DX
POP AX
RET

18
2.14 PCI VGA Controller
The HS-6200/6600 has built-in a Intel®69000 VGA Controller with
on-chip 2 MB memory, support resolutions up to 1280 x 1024 256
colors, reserved internal 50-pin LCD Panel connector.
To get more VGA drivers information, please refer to the INTEL
Internet address : WWW.CHIPS.COM
2.15 DiskOnChipAddress Setting
The HS-6200/6600 provides a U5 socket for install the
DiskOnChipmodule.
A JP6 may select the starting memory address of the DiskOnChip
(D.O.C.) for avoid the mapping area with any other memory
devices. If you have another extra memory devices in the system
with the same memory, neither the HS-6200/6600 nor the extra
memory devices will function normally. Please setting both at
different memory address mapping.
lJP6 : DiskOnChip  Address
Memory Address Mapping JP6
D000 * 1-2
D800 3-4
*) : default setting
The D.O.C. function allows the system in using without FDD nor
HDD. The D.O.C. may formatting as driver C: or driver A:. User may
also easily uses the DOS's commands such as FORMAT, SYS,
COPY, XCOPY, DISCOPY and DISKCOMP etc. This is means that
the D.O.C. may uses as driver-A if the system without FDD-A for
ambient application. Please contact with your supplier for different
size D.O.C. module.