Boser HS-2601 User manual

HS-2601
Celeron
TM
/Coppermine
TM
VGA LAN
• CRT/Panel•SODIMM•LAN•PC/104•Mini PCI•
• Flash Disk•IrDA•USB•Single +5V•
•Embedded35 Industrial Single Board Computer•

Copyrights
This manual is copyrighted and all rights are reserved. It is not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to
update the information contained herein.
Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award International Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or registered
trademarks of their respective companies or owners.
© Copyright 2003
All Rights Reserved.
User Manual edition 1.2, March 06, 2003

Contents •i
Contents
HS-2601 ......................................................................................................1
GENERAL INFORMATION .............................................................................3
1.1 MAJOR FEATURES .....................................................................................4
1.2 SPECIFICATIONS.........................................................................................5
1.3 DELIVERY PACKAGE...................................................................................6
HARDWARE INSTALLATION ........................................................................7
2.1 CAUTION OF STATIC ELECTRICITY.............................................................7
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION .............................8
2.3 HS-2601’S LAYOUT...................................................................................9
2.4 QUICK LISTING OF JUMPERS ...................................................................10
2.5 QUICK LISTING OF CONNECTORS ............................................................10
2.6 JUMPER SETTING DESCRIPTION..............................................................11
2.7 SETTING THE BUS-CLOCK FREQUENCY ..................................................12
2.8 SYSTEM MEMORY DRAM........................................................................12
2.9 SETTING THE FLAT PANEL VOLTAGE.......................................................12
CONNECTION .................................................................................................13
3.1 POWER AND FAN CONNECTORS ............................................................13
3.2 RESET BUTTON ........................................................................................14
3.3 FLASH DISK ..............................................................................................14
3.4 PCI E-IDE DRIVE CONNECTOR ..............................................................15
3.5 PARALLEL PORT CONNECTOR .................................................................16
3.6 THE FLOPPY DISK DRIVE CONNECTOR ...................................................17
3.7 SERIAL PORTS CONNECTORS .................................................................18
3.8 KEYBOARD/MOUSE CONNECTORS ..........................................................19
3.9 VGA CRT AND LCD CONNECTORS .......................................................20
3.10 IR CONNECTOR .....................................................................................22
3.11 USB PORTS CONNECTOR.....................................................................23
3.12 LAN INTERFACE CONNECTOR ..............................................................23
3.13 MINI PCI CONNECTOR ..........................................................................24
3.14 PC/104 BUS CONNECTION ...................................................................25

ii •Contents
AWARD BIOS SETUP....................................................................................27
4.1 MAIN MENU ..............................................................................................28
4.2 STANDARD CMOS SETUP.......................................................................29
4.3 BIOS FEATURES SETUP..........................................................................30
4.4 CHIPSET FEATURES SETUP .....................................................................31
4.5 INTEGRATED PERIPHERALS .....................................................................32
4.6 POWER MANAGEMENT SETUP.................................................................34
4.7 PNP/PCI CONFIGURATION SETUP ..........................................................35
SOFTWARE UTILITIES .................................................................................36
5.1 VGA DRIVER INSTALL FOR WIN95&98..........................................37
5.2 VGA DRIVER INSTALL FOR WIN NT4.0..........................................40
5.3 NETWORK DRIVER INSTALL FOR WIN98&95 ..............................44
5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0..............................47

3
Chapter-1
General Information
The HS-2601 is a 100MHz Bus Intel®BX chipset design 3.5” Embedded
Celeron™/Coppermine™ board with features combine together to make it an
ideal all-in-one industrial single board computer, enhanced I/O effects with
LAN and VGA interface.
With on board DMA33 of mode 3/4 to IDE drive interface architecture, the
HS-2601 supports with maximum 33.3 MB/sec in data transfer rating to 2
pieces IDE drive connection. Design with Intel®82443 BX core logic chipset
supports all series Celeron™/Coppermine™ operating. Intel®69000 VGA
chipset supports up to 1280 x 1024 256 colors display resolution. And it also
provides one internal 50-pin connector for various type of the LCD Panel
connection.
The HS-2601 provides with one SODIMM socket support up to 256MB of
main system memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission.
The HS-2601 features include one Intel®82559 100 Based LAN design on
board. With one external RJ-45 connector provides an easily for user’s LAN
application.

4
1.1 Major Features
 Socket 370 for Intel® Celeron™/Coppermine™ 266〜700 MHz
Processors
 Intel®82443 BX chipset
 Provide Flash Disk on board
 One piece SODIMM socket supports DRAM up to 256MB
 Fast PCI DMA33 controller supports two IDE drives include large
hard disks, CD-ROM and tape backup etc
 PnP I/O address & IRQ selection
 On board Intel® 82559 100 Based LAN
 Two high speeds RS-232 serial ports with 16C550 UART 16byte
FIFO
 One enhanced bi-directional parallel port supports SPP/EPP/ECP
 On board PS/2 Keyboard/Mouse connector or 6-pin header
 On board Intel®69000 VGA controller
 On board one 50-pin for various types LCD Panel connection
 On board two USB ports and one IrDA port
 Award PnP Y2K Flash BIOS
 Single +5V Power
 Provide Mini PCI connector
 Provide PC/104 connector

5
1.2 Specifications
 CPU: Socket 370 for Intel®Celeron™/Coppermine™ 266-700 MHz
 Bus Interface: Mini PCI Local Bus
 Chipset: Intel®82443 BX with 100MHz Bus facility
 Flash Disk：8~64MB (Option)
 Data Bus: 64bit
 Processing Ability: 64bit
 VGA Controller: Intel®69000 chipset with 2MB memory supports
CRT/Panel up to 1280x1024 256 colors. Provides internal 50-pin
LCD connector
 LAN: Intel®82559 100 Based LAN provides 100 Based ability
 IDE: Two IDE drives supports mode 3/4 with DMA33 function
provide data transfer rate up to 33MB/Sec
 Memory: One piece SODIMM socket provide up to 256MB
 Floppy: Supports up to two floppy disk drives
 Parallel Port: One bi-directional parallel port, supports
SPP/ECP/EPP
 Serial Port: Two RS-232 serial ports include 16C550 UART with
16byte FIFO
 BIOS: Award PnP Y2K Flash BIOS
 DMA Channels: 7
 Interrupt Levels: 15
 Keyboard/Mouse: 6-pin Mini Din connector or 6-pin header
 USB: Supports 2 USB ports
 IR Interface: Supports one lrDA TX/RX header

6
 Extra Power Connector: Provides one 4-pin +5V/+12V power in
connector.
 Max. Power Requirement: +5V @5A(300MHz)
 Operating Temperature: 0-60°C
 Board Size: 103mm x 146mm
1.3 Delivery Package
The delivery package of HS-2601 includes all following items:
 One HS-2601 Industrial Single Board
 One Printer Ports Flat Cable
 One COM port Flat Cable
 One IDE port Flat Cable
 One FDD port Flat Cable
 One PS/2 Keyboard/Mouse Transfer Cable
 Utility Diskette
 User’s Manual
Please contact with your dealer if any of these items are missing or
damaged when purchasing. And please keep all parts of the
delivery package with packing materials in case of you want to ship
or store the product in feature.

7
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware
of HS-2601. At first, please follow up sections 1.3, 2.1 and 2.2 in
check the delivery package and carefully unpacking. Following
after, the jumpers setting of switch selection.
2.1 Caution of Static Electricity
The HS-2601 has been well package with an anti-static bag in
protect its sensitive computer components and circuitry from the
damage of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER
SENSITIVE COMPONENTS WITHOUT ALL NECESSARY
ANTI-STATIC PROTECTION.
You should follow the steps as following to protect the board in
against the static electric discharge whenever you handle the
board:
1. Please use a grounding wrist strap on whoever needs to handle
the HS-2601. Well clip the ALLIGATOR clip of the strap to the end
of the shielded wire lead from a grounded object. Please put on
and connect the strap before handle the HS-2601 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or
tools on the pad whenever you work on them outside the
computer. You may also in use the anti-static bag instead the
pad. Please ask from your local supplier in help up your
necessary parts on anti-static requirement.

8
2.2 Caution on Unpacking and Before Installation
First of all, please follow with all necessary steps of section 2.1 in
protection the HS-2601 from electricity discharge. With refer to
section 1.3, please check the delivery package again with following
steps:
1.Unpacking the HS-2601, keep well storage of all packing material,
manual and diskette etc. if has.
2.Is there any components lose or drop from the board? DO NOT
INSTALL IF HAPPENED.
3.Is there any visual damaged of the board? DO NOT INSTALL IF
HAPPENED.
4.Well check from your optional parts (i.e. CPU, SRAM, DRAM,
ROM-Disk etc.) for completed setting all necessary jumpers
setting to jumper pin-set and CMOS setup correctly. Please also
reference to all information of jumpers setting in this manual.
5.Well check from your external devices (i.e. Add-On-Card, Driver
Type etc.) for completed add-in or connection and CMOS setup
correctly. Please also reference to all information of connector
connection in this manual.
6.Please keep all necessary manual and diskette in a good
condition for your necessary re-installation if you change your
Operating System or whatever needs.

9
2.3 HS-2601’s Layout

10
2.4 Quick Listing of Jumpers
JP1 —FAN Voltage Select
JP2 —CPU Clock Select
JP3 —Reset
JP4 —LCD Voltage Select
2.5 Quick Listing of Connectors
CN1: LAN Connector
CN2: IR Connector
CN3: 2-pin 5V Power In
CN4: FAN Connector
CN5: CRT Connector
CN6: 4-pin EXT Power In
CN7: Keyboard/Mouse 6-pin Header
CN8: PS/2 6-pin Mini Din Keyboard/Mouse
CN9: PC/104 40-pin Connector
CN10: PC/104 64-pin Connector
CN11: IDE Connector
CN12: FDD Connector
CN13: LCD Panel Connector
CN14: USB Ports
CN15: COM2 (5x2 header)
CN16: Parallel Connector
CN17: COM1 (5x2 header)

11
2.6 Jumper Setting Description
A jumper pin-set is ON as a shorted circuit with a plastic cap
inserted over two pins. A jumper pin-set is OFF as a open circuit
with a plastic cap inserted over one or no pin(s) between pins. The
below figure 2.2 shows the examples of different jumper pin-set
setting as ON or OFF in this manual.
Figure 2.2
All jumper pin-set already has its default setting with the plastic cap
inserted as ON, or without the plastic cap inserted as OFF. The
default setting may reference in this manual with a " * " symbol in
front of the selected item.

12
2.7 Setting the Bus-Clock Frequency
The HS-2601 provides all necessary by jumper setting in using
Bus-Clock frequency as the system bus clocking with JP2 setting as
following:
 Bus-Clock Frequency Setting of JP2 :
Bus-Clock Frequency JP2
*66MHz ON
100MHz OFF
2.8 System Memory DRAM
The HS-2601 provides a single size SDRAM memory by one piece
SODIMM socket request the access time should meet PC-100
standard. The maximum capacity of the on board memory is
256MB.
2.9 Setting the Flat Panel Voltage
The HS-2601 provides a setting for the selection of the working
voltage of individual flat panel by JP4 setting as following:
 Flat Panel Voltage Selecting of JP4:
Panel’s Working Voltage JP4
5.0 V 1-2
* 3.3 V 2-3
Please contact with your flat panel supplier for make sure a correct
Panel’s Working Voltage. Any mistake will cause defect to your flat
panel.

13
Chapter-3
Connection
This chapter gives all necessary information of the peripheral's
connections, switches and indicators.
3.1 Power and FAN Connectors
The HS-2601 provides one 2-pin DC-Power connector as following
CN3 pin information. And also provides 4-pin EXT Power connector
as following CN6 pin information. FAN Connector as following CN4
pin information.
 CN3 : 2-Pin Power In Connector
PIN NO. Description
1 VCC(+5V)
2 GND
 CN4 : FAN Out Connector
PIN NO. Description
1 GND
2 +12V
3 N.C.
 CN6 : 4-Pin EXT Power Connector
PIN NO. Description
1 VCC
2 GND
3 GND
4 +12V

14
3.2 Reset Button
The HS-2601 has one Reset Button connection from JP3.
 JP3 : Reset Button
PIN NO. Description
1 Ground
2 External Reset
3.3 Flash Disk
HS-2601 also offer Flash Disk function. Capacity from 8MB to
64MB. HS-2601’s standard is equip with 16MB Flash Disk. But,
Boser can up grate the Flash Disk capacity base on customer’s
request. Boser’s Flash Disk is using IDE interface as IDE HDD,
T\there for no device drive necessary.

15
3.4 PCI E-IDE Drive Connector
One standard 44-pin header daisy-chain driver connector provides
as CN11 with following pin assignment. Total two IDE (Integrated
Device Electronics) drivers may connect.
 CN11: IDE Interface Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RESET 2 GROUND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GROUND 20 N/C
21 N/C 22 GROUND
23 IOW# 24 GROUND
25 IOR# 26 GROUND
27 N/C 28 BALE - DEFAULT
29 N/C 30 GROUND# -DEFAULT
31 INTERRUPT 32 IOCS16#-DEFAULT
33 SA1 34 N/C
35 SA0 36 SA2
37 HDC CS0 38 HDC CS1#
39 HDD ACTIVE 40 GROUND
41 VCC 42 VCC
43 GROUND 44 VCC

16
3.5Parallel Port Connector
A standard 26-pin flat cable driver connector provides as CN16 with
following pin assignment for connection to parallel printer.
 CN16: Parallel Port Connector
PIN NO. Description PIN NO. Description
1 STROBE 2 DATA 0
3 DATA 1 4 DATA 2
5 DATA 3 6 DATA 4
7 DATA 5 8 DATA 6
9 DATA 7 10 ACKNOWLEDGE
11 BUSY 12 PAPER EMPTY
13 PRINTER SELECT 14 AUTO FORM FEED
15 ERROR# 16 INITIALIZE
17 PRINTER SELECT LN# 18 GROUND
19 GROUND 20 GROUND
21 GROUND 22 GROUND
23 GROUND 24 GROUND
25 GROUND 26 GROUND

17
3.6 The Floppy Disk Drive Connector
A standard 34-pin header daisy-chain driver connector provides as
CN12 with following pin assignment. Total two FDD drivers may
connect.
 CN12 : FDD CONNECTOR
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GROUND 2 REDUCE WRITE
3 GROUND 4 N/C
5 GROUND 6 DISK SELECT 1
7 GROUND 8 INDEX#
9 GROUND 10 MOTOR ENABLE A#
11 GROUND 12 DRIVE SELECT B#
13 GROUND 14 DRIVE SELECT A#
15 GROUND 16 MOTOR ENABLE B#
17 GROUND 18 DIRECTION#
19 GROUND 20 STEP#
21 GROUND 22 WRITE DATA#
23 GROUND 24 WRITE DATA#
25 GROUND 26 TRACK 0#
27 GROUND 28 WRITE PROTECT#
29 N/C 30 READ DATA#
31 GROUND 32 SIDE 1 SELECT
33 N/C 34 DISK CHANGE#

18
3.7 Serial Ports Connectors
The HS-2601 offers two high speeds NS16C550 compatible UART
with Read/Receive 16 byte FIFO serial ports with two internal 10-pin
header.
 CN15/17 : Serial Port 10-pin Header (COM2/COM1)
PIN NO. Description PIN NO. Description
1 DCD 2 DSR
3 RXD 4 RTX
5 TXD 6 CTX
7 DTR 8 RI
9 GND 10 NC