
10
$Mixing beaker
%Chopper «hc»
Please clean all parts before 
using for the first time – see 
paragraph «Cleaning»
How to operate your 
handblender (A)
The hand blender is perfectly suited 
for preparing dips, sauces, soups, 
mayonnaise and baby food as well 
as for mixing drinks and milk shakes.
1. Insert the motor part !into the 
blender shaft #and turn until it 
locks.
2. To avoid splashing, insert the 
handblender into the vessel first, 
only then press switch ‚. 
You can operate the handblender in 
the mixing beaker $and just as well 
in any other vessel. When blending 
directly in the saucepan while cooking, 
take the pan from the stove first to 
protect your handblender from over-
heating.
Recipe example: Mayonnaise 
200–250 ml oil
1 egg (yolk and white)
1 tbsp. lemon juice or vinegar 
Salt and pepper to taste
Put all ingredients into the beaker 
according to the a.m. order. 
Introduce the handblender to the 
base of the beaker, switch it on and 
keep it in this position until the oil 
emulsifies. Then, without switching 
off, slowly move it up and down until 
the mayonnaise is well combined. 
Vanilla-Honey-Prunes
(as a pancake stuffing or spread):
Fill 40 g prunes (cut in half) and 50 g 
clear honey (both chilled) into the 
chopper bowl and mix for 5 seconds, 
then add 10 ml water (vanilla-
flavoured) and resume mixing for 
3 seconds.
How to operate your 
chopper attachment (B)
(a) Upper part
(b) Blade
(c) Chopper bowl
(d) Anti-slip-base 
(not to be used as lid)
The chopper is perfectly suited for 
chopping meat, cheese, onions, 
herbs, garlic, chilis (with water), 
carrots, walnuts, hazelnuts, 
almonds, prunes etc. 
N.B.: Do not chop extremely hard 
food, such as ice cubes, nutmeg, 
coffee beans or grains. 
Before chopping ... 
– pre-cut meat, cheese, onions, 
garlic, carrots (see processing 
guide),
– remove stems from herbs, shell 
nuts,
– remove bones, tendons and 
gristle from meet. 
Chopping
1. Caution: Carefully remove the 
plastic cover from the blade (b). 
The blade is very sharp! Always 
hold it by the upper plastic part. 
Place the blade on the centre pin 
of the chopper bowl (c). Press 
down the blade and turn 90° to 
lock it. Always make sure that the 
anti-slip base (d) is attached to 
the bowl. 
5722112504_MQ120_Pesto_INT_S6-84.indd   10 25.01.17   13:46