10 11
press “power” button to shut o the product and the “position
system” state will be saved.
The WHO/ESH indicator to evaluate
blood pressure data
This device has a blood pressure level indicator (M) established
according to WHO and the European Hypertension Society
Guidelines (ESH) in 2007. For every measurement displayed on
the screen, the cursor will indicate the blood pressure level with
the corresponding color code, from green to red. You can use
this classication daily to guide you to understand your blood
pressure level. If you are really concerned by the classication
level, you should consult your doctor.
Irregular heart beat detector
The appearance of this symbol signies that a certain pulse
irregularity was detected during the measurement. Talking,
moving, shaking or an irregular pulse during the measurement
can result in the appearance of this icon. Usually this is not a
cause for concern, however if the symbol appears often, we
recommend you seek medical advice. The device does not
replace a cardiac examination, but service to detect pulse
irregularities at an early stage.
Calibration
This product has been calibrated at the time of manufacture. If
used according to the Instructions of use, periodic recalibration
is not required. If at any time, you question the measuring
accuracy, please contact an authorized Service Centre
(see package insert for a local Service Centre).
Manufacturing date is given by the LOT number on the back
of the product. The three numbers after LOT represents the
day of the year of manufacture. The two last digits of the year
of manufacture. An example: LOT 25010KYD – this product has
been manufactured on the 250th day of the year 2010.
corresponding user’s blood pressure data will not be deleted.
The delete operation must be conrmed by user.
Select mode
How to select user1/user2
• Make sure the product is in power o mode.
• Press the “user” button, and the current user mode will ash
on the LCD display.
• Press the “user” button again, it will change to another user
mode.
• When you have set the correct user mode, press the “power”
button to save the user mode and exit this setting.
• If you have selected the correct user mode and do not press
a button for 2 minutes, the product will shut o and save the
user mode you have selected automatically.
How to set date and time
• First turn o the product. Press the “set” button, and the
“month” will ash.
• Press the “adjust” button to change the current month.
(It can only be increased.)
• When the month is correct, press the “set” button again.
• Next the “date” will ash.
• Follow the same operation process to adjust the “date”,
“hour” and “minute”.
• When you nish the date/time setting, you can press the
“power” button to shut o the product or if you do not press
a button for 2 minutes, the product will shut o and save the
user mode you have selected automatically.
How to set positioning system on/o
Should you wish to deactivate the positioning system proceed
as follows:
• First turn o the product.
• Press the “user” button and hold it for 5 seconds.
• If the “position system” is turned on, the LCD will display “on”. If
the “position system” is turned o, the LCD will display “o”.
• Press the “user” button again, the state of “position system” will
be changed.
• When the “position system” has been set to your liking, you can
RED >
GREEN >
