Braun NTF 3000 User manual

English
1
No touch + forehead
thermometer
NTF 3000

English
1
English 1
Español 17
Contact Us
Questions or Comments?
Call us toll-free at: 1 800 477-0457
E mail: [email protected]
Or visit our website at: www.braunthermometers.com
Please be sure to specify the model number.
This product is manufactured under license to the ‘Braun’ trademark.
‘Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany.
© 2016 All Rights Reserved
Kaz, USA, Inc., a Helen of Troy Company
Marlborough, MA 01752
Contáctenos
¿Preguntas o Comentarios?
Llámenos lada gratuita al: 1 800 477-0457
Correo Electrónico: consumerr[email protected]
O visite nuestro sitio web: www.braunthermometers.com
Por favor asegúrese de especificar el número de modelo.
Este producto es fabricado bajo licencia de la marca registrada ‘Braun’.
‘Braun’ es una marca registrada de Braun GmbH, Kronberg, Alemania.
© 2016 Todos los derechos reservados.
Kaz USA, Inc., una Empresa de Helen of Troy
Marlborough, MA 01752
Patents/Patentes: www.kaz.com/patents/braun
Made in China/Hecho en China

2
WARNINGS AND PRECAUTIONS
Keep out of reach of children under 12 years. Never use the thermometer
for purposes other than those for which it has been intended. Please
follow the general safety precautions when using on children.
Never immerse the thermometer into water or other liquids (not waterproof).
Please follow the instructions in the “Care and cleaning” section.
Do not store this thermometer in temperature extremes below -13 °F
(-25 °C) or over 140 °F (60 °C) or in excessive humidity (above 95%
non-condensing relative humidity). If thermometer is stored in a
location that is cooler or warmer than where it is being used, let it sit
in the patient’s room for 10 minutes before taking a measurement.
Do not use the thermometer if there are signs of damage on the scanner
or on the thermometer itself. If damaged, do not attempt to repair the
product. Never insert a sharp object into the scanner area or any other
open surface on the thermometer.
This thermometer consists of high-quality precision parts. Do not drop
the device. Protect it from severe impact and shock. Do not twist the
device or the sensor.
Thank you for purchasing the Braun No touch + forehead thermometer
(NTF 3000). This thermometer is a high quality product incorporating the
latest technology and tested in accordance with international standards.
With its unique technology, the product can provide a stable, accurate
reading with each measurement. The thermometer performs a self-test
every time it is switched on to always guarantee the accuracy of
measurements. The Braun No touch + forehead thermometer (NTF3000)
is a non-sterile, reusable, clinical thermometer, intended for the intermittent
determination of human body temperature on people of all ages in a touch
and no touch mode using the center of the forehead as the measurement site.
Please read these instructions carefully before using this product
and keep the instructions and the thermometer in a safe place.

English
3
This thermometer is intended for household use only. Use of this
thermometer is not intended as a substitute for consultation with
your physician.
Temperature elevation may signal a serious illness, especially in
newborns and infants, or in adults who are old, frail, or have a weakened
immune system1. Please seek professional advice immediately when
there is a temperature elevation and if you are taking temperature on:
• Neonates and infants under 3 months (Consult your physician
immediately if the temperature exceeds 99.4°F)
• Patients Over 60 years of age (Fever may be blunted or absent in
older patients)
• Patients having diabetes mellitus or a weakened immune system (e.g.,
HIV positive, cancer treatment, chronic steroid treatment, post-surgery)
• Patients who are bedridden (e.g., nursing home patient, stroke,
chronic illness, recovering from surgery)
• A transplant patient (e.g., liver, heart, lung, kidney)
This thermometer is not intended for pre-term babies or light-for-date babies.
This thermometer is not intended to interpret hypothermic temperatures.
Do not allow children below 12 years to take their temperatures
unattended
.
Please consult your doctor if you see symptoms such as unexplained
irritability, vomiting, diarrhea, dehydration, changes in appetite or
activity, seizure, muscle pain, shivering, stiff neck, pain when urinating,
etc., even in the absence of fever.
Even in the absence of fever, those who exhibit a normal temperature
may still need to receive medical attention. People who are on
medication should not be assessed solely on temperature readings to
determine the severity of their illness.
Do not modify this equipment without the authorization of the
manufacturer.
1. See page 15

4
6
8
7
1
43
2
5
Product description
Power button
Temperature button
LCD display
Scanner
Silent mode switch
Battery door
Guidance light
Protective cap
1
2
3
4
5
6
7
8

English
5
Why Braun No touch + forehead thermometer?
Measurement in under 2 seconds
The innovative infrared technology measures forehead
temperature in under 2 seconds, whether you use the
touch or no-touch option.
Accurate and reliable
Due to the unique technology, the Braun No touch
+ forehead thermometer captures the heat naturally
given off by the forehead to calculate temperature. Get
the same professional accuracy whether touching your
child’s forehead with the thermometer or holding it up
to 2 inches (5 cm) away.
Easy to use
The Braun No touch + forehead thermometer is
non-invasive. A measurement can be taken even
while a child is sleeping.
The Braun No touch + forehead thermometer is less
threatening to a child than a rectal thermometer and
easier to use than other methods.
Safe and hygienic
No-touch option helps minimize spreading of germs.
Safe for use on children and adults.

6
Temperature guidance feature
Temperature guidance helps you to better understand the meaning of
your child’s temperature with the color indicated on the display. The
screen displays a green, yellow, or red backlight depending on the
temperature reading. 10 audible beeps indicate temperatures above
99.4F (37.4C).
It is important to note that a patient’s temperature may be impacted
by age, gender or medical condition, or by factors such as ambient
temperature, time of day, medications taken or the temperature
measurement site3.
NOTE: Backlight remains OFF when below temperature readings are registered:
93.9≤T≤96.3°F (34.4 ≤T ≤35.7°C)
3. Herzog L, Phillips SG. Addressing concerns about fever. Clin Pediatr (Phila) 2011
May;50(5):383-90.
Color range
Green
Yellow
Red
Reading
>96.3 - 99.4 °F
(>35.7 - 37.4 °C)
>99.4 - 101.3 °F
(>37.4 - 38.5 °C)
>101.3 - 108.0 °F
(>38.5 - 42.2 °C)
How does Braun No touch + forehead work?
The Braun No touch + forehead thermometer measures infrared energy
radiated from the skin at the center of the forehead area. This captured
energy (which is twice as much thermal energy compared to a traditional
forehead thermometer2 ), is collected through the sensor and converted
to an oral equivalent temperature value.
2. A traditional forehead product without any optical system to capture radiated heat.
The Braun No touch + forehead thermometer has been clinically
tested and proven to be safe and accurate when used in
accordance with its operating instruction manual.

English
7
0 - 1”
3Position
Position device on or up to 2
inches (5 cm) away from the
center of the forehead, just
between the eyebrows. For No
touch readings, the yellow
guidance light will show you
where you are aiming. If the
eyebrow area is covered with hair,
sweat or dirt, please clean the
area and then wait 10 minutes to
improve the reading accuracy.
It is important to hold the thermometer and
the forehead steady during measurement.
Movement will impact the temperature reading.
How to use your Braun No touch + forehead
Power on
Press and release the power
button once. Backlight will
come on and the start up
sequence starts.
Remove cap
Ready
When the device is ready and correctly
positioned, a horizontal line of dashes
(“---”) will appear on the screen.
0 - 2”
(0-6 cm)
2
1
Yellow light
will show
you where
you are
aiming.

8
Take temperature
Press the temperature button (you can press
and hold the button or press and release it).
When the device is placed correctly, the screen
displays a dashed line animation while it takes a
reading. After the animation sequence (under 2
seconds), the display shows the temperature. The
appropriate backlight color is displayed on the
screen and the confirmation beep is heard.
If the device is positioned too far away from the
forehead, it will prompt you to move closer by
displaying the letters “FWD.” Slowly move the
device toward the forehead until the dashed
line animation starts and a reading is displayed.
4
5Read temperature
Remove the device and
read the temperature.
For no backlight and green
backlight readings, you will
hear a single long beep for 2
seconds. For yellow and red
backlight readings, you will
hear 10 short beeps.
To repeat
Go to step 3.
0 - 2”
(0-6 cm)
0 - 2”
(0-6 cm)
6To turn off
Press the power button to turn off. Device will also shut off
automatically after 60 seconds of no use.

English
9
Temperature taking hints
It is important to know each individual’s normal temperature when
they are well. This is the only way to accurately diagnose a fever. To
determine normal temperature, take multiple readings when healthy.
Re-measure with a standard digital thermometer for confirmation.
This thermometer displays an oral equivalent temperature reading.
Oral readings are approximately 0.9°F (0.5 °C) lower than a rectal
digital measurement4).
Patient must be inside for 30 minutes before taking a measurement.
Note: Patient and the thermometer should be in the same ambient
temperature for at least 10 minutes before taking a reading.
Always hold the thermometer and the forehead steady when taking a
reading. Do not move the thermometer until you hear the final beep.
For patients measuring their own temperature, use the “touch” option
instead of “no touch.”
Don’t take a measurement while or immediately after nursing a baby.
Patients should not drink, eat, or be physically active before/while taking
the measurement. Remove hats and wait 10 minutes before taking
a reading.
Remove dirt or hair from the forehead before taking a measurement.
Bangs may cause higher readings. Wait at least 10 minutes after washing
the forehead area before taking a reading.
Always take the temperature exactly as directed. Temperature results
may vary if positioned in the wrong location.
In the following situations it is recommended that three temperatures in
the same location be taken and the highest one taken as the reading:
• Newborn infants in the first 100 days.
• Children under three years of age with a compromised immune system
and for whom the presence or absence of fever is critical.
• When the user is learning how to use the thermometer for the first time
until he/she has familiarized himself/herself with the device and obtains
consistent readings.
4. Sund-Levander M, Forsberg C, Wahren LK. Normal oral, rectal, tympanic and axillary body temperature
in adult men and women: a systematic literature review. Scand J Caring Sci 2002 June;16(2):122-8
Herzog L, Phillips SG. Addressing concerns about fever. Clin Pediatr (Phila) 2011 May;50(5):383-90.

10
Changing the temperature scale
Open battery compartment and
remove the batteries.
˚C / ˚F switch is found in the center
of the battery compartment.
Slide switch to ˚C or ˚F to set
preferred temperature scale.
Replace the batteries and close
the battery door.
4
1
2
3
Fahrenheit Celsius
Changing the sound mode
The Braun No touch + forehead
thermometer allows you to silence the beeps
on the thermometer to avoid waking a
sleeping child. To use this feature, slide the
switch to the silent mode position and take
a temperature reading. An icon will appear
on the screen to show that the thermometer
is in silent mode.
Calibration
The thermometer is initially calibrated at the time of manufacture. If
this thermometer is used according to the use instructions, periodic
re-adjustment is not required. If at any time you question the accuracy,
please contact Consumer Relations.

English
11
Care and cleaning
The thermometer should be cleaned in between uses, as necessary. Use
an alcohol swab or cotton swab moistened with alcohol (70% Isopropyl)
to clean the thermometer casing and the measuring probe. Ensure that
no liquid enters the interior of the thermometer. Never use abrasive
cleaning agents, thinners or benzene for cleaning and never soak the
device in water or other cleaning liquids. Wait 10 minutes after cleaning
before taking a temperature measurement. Make sure to replace
the protective cap after use to prevent scratches or damage to
the thermometer.
Never insert a sharp object into the scanner area or any other open
surface on the thermometer.
Clean sensor mirror before each use or as needed.
Replacing the batteries
The Braun No touch + forehead thermometer comes with 2 AA batteries.
Replace with 2 new AA batteries when the flashing battery symbol
appears on the LCD display. To change the batteries, slide open the
battery cover and remove batteries. Replace the batteries being sure
to align properly as indicated inside the battery compartment. Remove
the battery from the product if it is not required for extended periods of
time in order to avoid damage to the thermometer resulting from a
leaking battery.
To protect the environment, dispose of the product and empty
batteries at appropriate collection sites according to national or

12
Errors and troubleshooting
Situation
When 20% of battery
life is left, the display
flashes the low battery
warning symbol. The
device can still work
until the battery life
has 0% left.
If the steady battery
icon is the only
symbol shown on the
display, the device
cannot work. The
battery should be
replaced immediately.
This message displays
when measured
temperature is lower
than 93.9 °F (34.4 °C)
or higher than 108 °F
(42.2 °C) or when the
room temperature is
outside the operating
range of 59 °F-104 °F
(15°C-40°C)
.
Blank display.
Thermometer does
not have power.
Error Message Solution
Replace battery.
Replace battery.
Make sure the
protective cap is
removed. Re-measure
the temperature again,
carefully following
the instruction in
“How to use” section.
Please check if the battery
has been loaded correctly.
Also check polarity (<+>
and <–>) of batteries.
Contact Consumer
Relations if thermometer
still does not function.

English
13
Product specification
Type: No touch + forehead thermometer (NTF 3000)
Measuring range: 93.9 °F (34.4 °C) – 108 °F (42.2 °C)
Resolution: 0.1 °F (0.1°C)
Laboratory Accuracy ± 0.4°F for the range 95°-107.6°F (± 0.2°C for 35-42°C)
(Ambient Temperature: 59°F to 104°F (15°C to 40°C )
Display: Liquid Crystal Display, 4 digits plus special icons
Acoustic: Green backlight = single long beep for 2 sec duration
Audio: Red or Yellow backlight: 10 short beeps
Operating temperature: 59 °F – 104 °F (15 °C – 40 °C)
Automatic Switch-off: Approx. 60 seconds after last measurement has been taken
Weight: 3.51oz. (with battery), 2.72oz. (w/o battery)
Limited three year warranty
You should first read all Instructions before attempting to use this product.
A. This 3 year limited warranty applies to repair or replacement of product
found to be defective in material or workmanship. This warranty does not apply
to damage resulting from commercial, abusive, unreasonable use or supplemental
damage. Defects that are the result of normal wear and tear will not be considered
manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts,
so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights which vary from
jurisdiction to jurisdiction. This warranty applies only to the original purchaser
of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is found to be defective
in material or workmanship.
C. This warranty does not cover damage resulting from any unauthorized attempts
to repair or from any use not in accordance with the instruction manual.
Call us toll-free at 1-800-477-0457 or e-mail: consumerr[email protected]. Please
be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER
RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE PRODUCT
TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE
MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND
CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.

14
Long term storage ranges
Storage/transport temperature: –13 °F to 140 °F (–25 °C to 60 °C)
Humidity: 15–95% non condensing
Battery: (2) AA Batteries - at least 1000
measurements
Pressure: 700-1060hPA (0.7-1.06 atm)
This infrared thermometer meets requirements established in ASTM Standard E
1965-98 for the thermometer system. Full responsibility for the conformance of the
product to the standard is assumed by Kaz, USA, Inc., a Helen of Troy Company,
Marlborough, MA 01752, USA.
ASTM laboratory accuracy requirements for the thermometer only in the display
range of 96.8 °F to 102.2 °F (36 °C to 39 °C) for infrared thermometers is ± 0.4 °F
(± 0.2 °C), whereas for mercury-in-glass and electronic thermometers, the
requirement per ASTM Standards E 667-86 and E 1112-86 is ± 0.2 °F ( ± 0.1 °C).
This device conforms to the following standards:
IEC 60601-1:2006 Medical electrical equipment. General requirements for basic
safety and essential performance
ISO 80601-2-56 Particular requirements for basic safety and essential
performance of clinical thermometers for body temperature measurement
ASTM 1965E – ASTM Standard for Infrared Clinical Thermometers
EN 12470-5: 2003 «Clinical thermometers» – Part 3: Performance of compact
electrical thermometers (non-predictive and predictive) with maximum device.
IEC 60601-1-2: General requirements for basic safety and essential performance
–
Collateral Standard: Electromagnetic compatibility –
Requirement and tests
NOTE: Do not use this device in the presence of electromagnetic or other
interference outside the normal range specified in IEC 60601-1-2.
EN 980: 2008 Symbols for use in labeling of medical devices.
EN 1041: 2008 Information supplied by the manufacturer of medical devices.
EN 60601-1-11: 2010 Medical electrical equipment -- Part 1-11: General
requirements for basic safety and essential performance -- Collateral standard:
Requirements for medical electrical equipment and medical electrical systems
used in the home healthcare environment.

English
15
P/N: 31IMNTF3190R1
07JUN16