Bristan Artisan Wiring diagram





Installation
Installation Installation
Installation Instructions & User
Instructions & User Instructions & User
Instructions & User Guide
GuideGuide
Guide
Artisan
Artisan Artisan
Artisan Professional
Professional Professional
Professional Mixer
MixerMixer
Mixer
Please keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement partsPlease keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement parts

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have
designed this product with your enjoy ent in ind. To ensure that it works to its full
potential, it needs to be fitted correctly. These fitting instructions have been created to give
you all of the infor ation you need and, if you need any further help, please do not hesitate
to give us a call on 0844 701 6273.
I portant Safety Infor ation 03
General Specifications 03
Installation Require ents 04
Installation 05
Maintenance 06
Contents
ContentsContents
Contents
Guarantee 07
02

I portant Safety Infor ation
I portant Safety Infor ationI portant Safety Infor ation
I portant Safety Infor ation
• Please read these instructions thoroughly and retain for future use.
• All products anufactured and supplied by Bristan are safe provided they are installed,
used correctly and receive regular aintenance in accordance with these instructions
• If you are in any doubt about your ability to install this product safely you ust
If you are in any doubt about your ability to install this product safely you ust If you are in any doubt about your ability to install this product safely you ust
If you are in any doubt about your ability to install this product safely you ust
e ploy the services of an experienced qualified plu ber.
e ploy the services of an experienced qualified plu ber.e ploy the services of an experienced qualified plu ber.
e ploy the services of an experienced qualified plu ber.
•Re ove all packaging and check the co ponents for da age before starting
installation.
•This product ust
ust ust
ust not be odified in any way as this will invalidate the guarantee.
• These fittings need to be installed in accordance with and eet the require ents of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
General Specifications
General SpecificationsGeneral Specifications
General Specifications
Min Max
Operating pressure range (bar) 0.5 5.0
Maxi u
static pressure
–
10.0
bar
03
Maxi u
static pressure
–
10.0
bar
NOTE:- No inally equal (balanced) inlet supply
pressures are reco ended for opti u
Perfor ance of ixer taps. If pressures are
unequal, then a pressure reducing valve should
be used.
Designed to co ply with BS EN 200 for single
taps/ co bination taps for water syste s of
type 1 and 2 general technical specifications
and to be used within syste s designed to
BS 6700.
BS 6700 reco ends the te perature of stored
water should never exceed 65°C. A stored water
te perature of 60°C is considered sufficient to
eet all no inal require ents and will ini ise
the build up of li e scale in hard water areas.

Installation Require ents
Installation Require entsInstallation Require ents
Installation Require ents
IMPORTANT
IMPORTANT IMPORTANT
IMPORTANT -
--
- PLEASE READ
PLEASE READPLEASE READ
PLEASE READ
This/these fitting/fittings needs/need to be installed in accordance with the following
This/these fitting/fittings needs/need to be installed in accordance with the following This/these fitting/fittings needs/need to be installed in accordance with the following
This/these fitting/fittings needs/need to be installed in accordance with the following
Installation Require ents and Notes (IRN) to ensure they eet the require ents of the
Installation Require ents and Notes (IRN) to ensure they eet the require ents of the Installation Require ents and Notes (IRN) to ensure they eet the require ents of the
Installation Require ents and Notes (IRN) to ensure they eet the require ents of the
Water Supply (Water Fittings) Regulations 1999 and the Scottish Byelaws 2004.
Water Supply (Water Fittings) Regulations 1999 and the Scottish Byelaws 2004.Water Supply (Water Fittings) Regulations 1999 and the Scottish Byelaws 2004.
Water Supply (Water Fittings) Regulations 1999 and the Scottish Byelaws 2004.
IRN
IRN IRN
IRN R001
R001R001
R001
See text of entry for Installation Require ents or Notes.
IRN
IRN IRN
IRN R006
R006R006
R006
This tap or co bination tap asse bly has a Type AUK3 air gap and is therefore for installation
in any pre ises to protect against a backflow risk up to a Fluid Category 5.
IRN
IRN IRN
IRN R010
R010R010
R010
Water supplies shall be a reasonably balanced pressures fro a co on source (e.g. hot and
cold supplies both fro the sa e storage or both fro a supply pipe). Where the fitting is
cold supplies both fro the sa e storage or both fro a supply pipe). Where the fitting is
supplied fro unbalanced supplies (e.g. hot and cold supplies fro separate sources) a
‘Listed’ single check valve
‘Listed’ single check valve‘Listed’ single check valve
‘Listed’ single check valve or so e other no less effective backflow prevention device shall
be fitted i ediately upstrea of both hot and cold water inlets.
0

Installation
InstallationInstallation
Installation
I portant:
I portant: I portant:
I portant: If the fitting is installed at low pressure (tank fed), then the ini u distance fro
the underside of the water outlet to the cold water tank should be at least 5 etres to ensure
adequate perfor ance.
This ixer should be installed in co pliance with Water Regulations. For further details please
contact your local Water Authority.
1. Identify all co ponents are present prior to starting installation.
2. Install the ixer body (3) to the sink.
3. Screw the fixing rod (6) into the botto of the ixer body (3).
4. Slide the fixings (7) onto the threaded rod (6) up to the underside of the sink.
5. To secure the ixer in place tighten the fixing nut included in the fixing kit.
6. Screw in the flexible connecting pipes (5) by hand only (DO NOT OVERTIGHTEN).
hand only (DO NOT OVERTIGHTEN).hand only (DO NOT OVERTIGHTEN).
hand only (DO NOT OVERTIGHTEN).
7. Connect the hot and cold water supplies to the flexible connecting pipes (5).
8. Turn on both water supplies, and operate the handles in both directions letting the water
flow for a few inutes to check all joints and connections for any leaks.
05
flow for a few inutes to check all joints and connections for any leaks.
1. Ar x1
2. Spout x1
3. Body x1
4. Handles x2
5. Flexible Connecting Pipes x2
6. Threaded Rod x1
7. Fixing Kit x1

General Cleaning
General Cleaning General Cleaning
General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve the
visible surfaces. All finishes will wear if not
cleaned correctly. The only safe way to clean
your product is to wipe with a soft da p
cloth. Stains can be re oved using washing
up liquid. All bathroo cleaning products
(powders and liquids) will da age the
surface of your fitting, even the non – scratch
cleaners.
Note:
Note: Note:
Note: Never use abrasive detergents or
disinfectants or those containing alcohol,
hydrochloric acid or phosphoric acid.
Bristan reco end E-cloth for
cleaning all of our bathroo &
kitchen products. Using just
water , E-cloth gives a s ear
free, deep clean by breaking up
and holding dirt, which nor al cloths leave
Maintenance
MaintenanceMaintenance
Maintenance
2. Pull the handle off to reveal the valve (3).
3. Unscrew the valve carefully clean the valve
and valve seating
4. If necessary replace the valve
5. Fit the valve back into the tap body and
tighten fully using a suitable spanner
6. Push the handle back onto the valve spindle
and replace the grub screw (1) and tighten on
the underside of the handle (2).
If the proble persists please contact our
custo er services helpline quoting the
product code.
06
free, deep clean by breaking up
and holding dirt, which nor al cloths leave
behind. Order through your Bristan stockist
(order code: ECLOTH).
Maintenance
MaintenanceMaintenance
Maintenance
We advise that your fitting is regularly
serviced in hard water areas to aintain
opti u perfor ance.
If your fitting begins to leak the following
should be carried out.
Isolate both hot and cold water supplies to
the ixer valve by either:
•Turning the water supply off at the ains
stopcock or
•Turning off the isolation valves to the ixer
valve.
1. Unscrew the grub screw (1) on the
underside of the handle (2).

Bristan Guarantee
Bristan GuaranteeBristan Guarantee
Bristan Guarantee
Bristan offers solid guarantees to provide you with co plete peace of ind.
Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour*. Gold, painted and special finishes 3
years parts only.
All subject to proof of purchase.
*Labour provided by an approved Bristan engineer. Guarantee only applies to products with a
anufacturing fault. A deferred pay ent will be necessary in order to secure any visits by our
engineers which will be charged if the proble is found not
notnot
not to be a anufacturing fault. If the
fault is found to be down to a anufacturing error, the pay ent will be released and not charged.
This guarantee applies to products purchased within the United Kingdo or Republic of Ireland,
but does not apply to products used co ercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation ust allow ready access to all products for the purpose of inspection,
aintenance or replace ent.
Any part found to be defective during the above guarantee period will be replaced without
charge, providing that the product has been installed in accordance with the instructions, used
as intended, and regularly serviced.
charge, providing that the product has been installed in accordance with the instructions, used
as intended, and regularly serviced.
Servicing should be carried out at regular intervals of no ore than 12 onths and ore
frequently in hard water areas (heavy li e scale) areas.
In the unlikely event that any proble s are encountered with the product’s perfor ance on
installation, you ust obtain guidance/authorisation fro our Custo er Service Depart ent,
and be able to supply proof and date of purchase, before any re edial action is taken.
The guarantee excludes general wear and tear and da age caused by accident, isuse or
neglect, and does not cover the following:
. Co ponents that are subject to general wear and tear such as filters, seals, ‘O’ rings and
washers etc.
· Da age caused by faulty installation
· Da age caused by li e scale or any waterborne debris
· Da age caused by inappropriate cleaning products (see user instructions)
· Da age caused by the use of non-Bristan parts
· The product being used for a purpose other than intended by the anufacturer.
In the interests of continuous product i prove ent Bristan reserves the right to alter
specification as necessary.
07

This booklet covers product code
AR SNKPRO C
Helpline
HelplineHelpline
Helpline
08 701 6273
08 701 627308 701 6273
08 701 6273
08 701 6273
08 701 627308 701 6273
08 701 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG
A Masco Company
Website: www.bristan.com
Telephone: [phone] Facsimile: 08 701 6275
Email: [e-mail]
FI ( AR SNKPRO C)– REV. D1