Bristan Artisan AR SNK C User manual

Bristan, Birch Coppice Business Park, Dordon, Tamworth, B78 1SG
Telephone: [phone] Facsimile: 08 701 6275
Web Site: www.bristan.com Email: [email protected] D2
ProductSpecification
Product Code: AR SNK C
Finish: Chrome
Product Type: Contemporary
Construction: Body is of brass construction
and is designed to conform to BS EN 200
Valve Type: ¼ turn ½ ceramic disc valves
Supply: Suitable for all plumbing systems
Inlet Connections: M12 x 15mm screw-in copper tail pipes
Water Pressure: Min. 0.5 bar, Max. 8.0 bar
AdditionalInformation
• Dual flow.
• Supplied with metal handles.
• Chrome plated to BS EN 248.
Technical Advice: For further information please call 0844 7016273 or email custom[email protected]om.
Guarantee: 5 years covering manufacturing faults.
Compliance/Approvals
WRAS: Certificate No. 0601116
System
Pressure
0.
5
bar
1.0
bar
1
.5
bar
2
bar
3
bar
5
bar
AR SNK C (mixed) 13.6 19.8 24.6 28.6 35.3 45.9
TECH ICALDATASHEET
ARTISA
ARTISAN
MONOBLOC
SINK MIXER
FlowRates (litres per minute)

Artisan Sink
Mixer
Fitting Instructions
& Contents List
(AR SNK C)
Please keep these instructions for future reference and request of
replacement part
(FI AR SNK) (Rev.D6)
AFTERCARE INSTRUCTIONS
GUARANTEE
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth. Stains can be removed using washing up liquid.
All bath cleaning powders and liquids will damage the surface of your fitting, even the
non-scratch cleaners.
All products are manufactured to the highest standards and a 5 year guarantee
covers any defect in manufacture.
In the interests of continuous product development we reserve the right to alter
specification as necessary
Installer please fill in code here
Bristan Group Limited
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
A Masco Company
Website: www.bristan.com
Telephone: [phone]
Facsimile: 0844 701 6275
Email:
NOTE: Never use abrasive detergents or disinfectants or
those containing alcohol, hydrochloric acid or phosphoric acid.
All products must have access for servicing or replacement during the life of
the product.
PRODUCT IDENTIFICATION CODE LASER ETCHED ON PRODUCT
. (Where applicable)
PRODUCT CODE: AR SNK C
TELEPHONE HELPLINE: 0844 701 6273
[email protected]
Bristan recommend E-Cloth for cleaning all of our
bathroom & kitchen products. Using just water, E-cloth
gives a smear free, deep clean by breaking up and holding
dirt, which normal cloths leave behind. Order through your
Bristan stockist. (ORDER CODE: ECLOTH)

WATER PRESSURE
This mixer is suitable for use at all supply pressures. However for optimum use both
the hot and cold supplies should be reasonably balanced.
If the fitting is installed at low pressure (tank fed), then the minimum distance from the
highest installed position of the shower head to the underside of the cold tank should
be 5 metres to ensure adequate shower performance.
Operating Pressures: Min 0.5 bar, Max 8.0 bar.
INSTALLATION
1. Identify all components and check for completeness, particularly before
commencing installation.
2. Fit the mixer body to the sink using the ‘C’ plate fixing kit. Offer the mixer body
(1) onto the sink, with the washer (2). The triangular fixing bracket (3) and the
metal washer (4) go on the underside of the sink, to be secured by the
threaded rod (6) and nut (5).
3. Fit the flexi tail pipes (7) to the fitting and connect the check valve (supplied)
To the hot inlet Connect the hot and cold supplies.
4. Fully open both valves, letting them run for a few minutes to flush out the
system and check all joints and connections for leaks.
5. See over the page for aftercare instructions.
(DO NOT OVERTIGHTEN).
CD VALVE
CLEAN WASHER
AND SEAT
MAINTENANCE
If the fitting begins to drip:-
1. Turn off the water supply.
2. Remove fitting head and valve.
3. Carefully clean seating and rubber washer.
4. Replace valve and turn on the water supply.
5. Contact our helpline if problem persists.
3
4
567
21
CONTENTS
1. Mixer Body (x1)
2. Washer (x1)
3. Triangular Bracket (x1)
4. ‘C’ Shaped Metal Washer (x1)
5. Nut (x1)
6. Threaded Rod (x1)
7. Flexi Tails (x2)