Bristan CFC33 User manual

SW FR WH FRAME
CFC33
Please keep these instructions for future reference and request of replacement parts
INSTALLATION INSTRUCTIONS
Front Access Wall Hung Frame with Concealed Cistern
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

2
DESCRIPTION
a
c
d
e
h
i
jkmn
o
p
q
r
l
f
g
b
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

Control panel
3
Tools required:
• Set of wrenches from 8 to 19 mm
• Hack saw
• Electric drill + bit dia 10 mm
• Spirit level
• Pencil + ruler
• Tape measure
• Hammer
• Screw driver
ACCESSORIES
Drain kit
Float valve
Stopcock with fibre joint
Mechanism
PSE template
Supply bend
Supply bend cap
Toilet pipe cap
Supply sleeve
Bowl attaching kit
Flexible sheaths (x 2)
Pipe attaching collar
Toilet bowl attaching rods (x 2)
Setscrew (x 2)
Adjustable foot (x 2)
Screw plug (x 8)
Plug (x 8)
Toilet bowl stud attaching tab (x 2)
Attaching bracket (x 2)
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
White single volume plate Ref. 31 1830-10
Chrome double volume plate Ref. 31 1880-10
White double volume plate Ref. 31 1800-10
Chrome double volume plate Ref. 31 1850-10
Bent drain kit Ref. 92 4000-07
Straight drain kit Ref. 92 4010-07
Bent pipe
Plate
Chassis
Screws
(4)
Straight
pipe
Drain
sleeve
Drain
sleeve
Advice:
• Keep the product package during
installation: there is a cutting template
on the back
• Keep these instructions safety for any
maintenance operations.
 Read bowl and toilet seat instructions
before intalling the cistern frame.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

4
INSTALLATION TYPES
EFFECTIVE DIMENSIONS
➊ Wall fixing
I
I - Frame depth =
from 142 to 245 mm straight outlet
from 147 to 245 mm bent outlet
II - Cladding thickness = from 16 to 100 mm
III - Height = Adjustable from 1080 to 1280 mm
IV - Height of toilet bowl = 400 mm (finished floor level)
V - Maximum thickness of finished flooring = 185 mm
II
III
VIV
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

I - ASSEMBLING THE TOILET BOWL ATTACHING RODS AND WALL FIXING
II - ADJUSTMENT OF THE FRAME HEIGHT
➊ Measure the center distance of the toilet bowl (A)
➋ Insert the rods (I) into the holes of the frame,
corresponding to the center distance
➌ Position the frame in place
➍ Secure the attaching tabs (q) to the rods (l),
position the assembly against the wall and lock
with the nuts.
➎ Position the wall mounting bracket (r) against
the wall and attach it with the nuts, first
checking that the frame is vertically level
➏ Use a hacksaw to cut the threaded rods of the
bracket protruding from the frame
➊ Position the frame in its final location
➋ Undo the 2 setscrews (m)
➌ Adjust the height of the feet so that the top of the toilet bowl
is at a height of 400 mm from the finished floor level.
➍ Check that the frame is level (vertically and horizontally) and
tighten the setscrews
 If the frame is being attached to an unfinished floor surface,
the maximum thickness of the finished floor surface shall
not be more than 185 mm.
5
A
➊ ➋
➍
➎➏
r
q
l
m➋
➍
➌
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

6
III - PREPARING FOR ATTACHMENT
IV - CONNECTING THE DRAIN OUTLET
➊ Mark the drilling points (6 for wall and 2 for floor)
➋ Remove the frame and drill to a depth of 70 mm at the least, using
an 10 mm diameter drill bit
➌ Position the screw plugs in the holes
➍ Move the frame back in place and connect the drain pipe
➊ Attach the collar (k)
➋ Position the drain outlet pipe
➌ Tighten the collar (k)
 Before gluing the drain outlet pipe to the main
drain pipe, ensure that the frame is correctly
positioned.
If the drainpipe is not opposite the outlet pipe,
the connection can be made using PVC bends and
couplings.
➊
➋➌
x 6
x 2
k
Bent outlet
Straight outlet
➊
or
➊
➋
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

7
V - ATTACHING THE FRAME
VI - WATER SUPPLY CONNECTION
➊ Attach the frame definitively
➊ Remove the frame by
lifting the two locks
➋ Connect your pipe to the
shut-off valve (b) either
using the dual cone
supplied or directly with
the nuts provided on the
water inlet (in this case,
ensure tightness using a
fibre washer)
➌ Insert the water supply
tube in the cistern
➍ Connect the shut-of f
valve (b) to the float valve
(a) (ensure tightness by
a fibre washer).
Frame
Locks
Frame
b
a
b
➊
➋
➌
➍
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

8
VII - TESTING WITH WATER
➊
➋
➎
➐
➊ Insert the supply sleeve (h) and
the drain sleeve on the toilet
bowl
➋ Position the toilet bowl on the
frame
➌ Turn on the water using the shut-
off valve (b) and wait until the
toilet bowl fills
➍ Manually operate the mechanism
(c) using the flush-pull control
➎ Check the tightness of the supply
and drain connections
➏ Close the shut-off valve and drain the
cistern
➐ Remove the toilet bowl
c
h
➌
➍
➏
➎
➏
b
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

9
VIII - PREPARING THE CLADDING
IX - CLADDING
➊ Fit the frame
➋ Attach the PSE template (d) to the frame using
the two grey screws provided in the control
panel box
➌ Fit the caps (f) and (g) on the supply bend (e) and
on the drain pipe as well as the flexible sheaths
(i) over the attaching rods of the toilet bowl (l)
 The thickness of the covering must be between 16 and 100mm,
the covering must be fixed to the support structure.
Cladding can be of various materials (brick, plaster blocks, plaster board, water repellent
wood panels etc).
For the preliminary punching out of the various holes (command plate, evacuation and
filling of the bowl, and bowl-fixing rods) a measuring guage can be found on the back
of the packing.
Once the covering is finished, take off the PSE guage (d), keep the screws for fixing on
the command plaque, take off the shutters (f) and (g).
d
f
j
Frame
➊
➋
➌
g
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

10
X - TOILET BOWL CONNECTION
➊ Using a rule placed as shown in the above drawing,
draw a mark on the toilet bowl side, on the two
sleeves.
➋ Remove the sleeves from the toilet bowl and fit them
to the frame. Using a rule placed as shown in the
drawing above, make a mark on the wall side, on
the two sleeves
➌ For each of the sleeves, measure the dimension
(L) between the two marks.
➍ Transfer this dimension (L) by
increasing by 3 mm at the end (frame
side) the size obtained on each
sleeve. For instance, if L = 50 mm,
shorten the sleeve by 53 mm.
➎ Cut the sleeves using a hack saw.
 Read bowl and toilet seat instructions before intalling
the cistern frame.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk