Brodit 747286 User manual

11 February, 2022, www.brodit.com, © 2022 Brodit AB
Product 747286
747286 Holder for Locking Active holder for fixed installation. With tilt swivel. With spring stud locking.
This holder is to be used when you want to have your device securely in place and still have it easy accessable.
The holder has a spring stud locking feature. For fixed installation. The holder is to be connected inside the
dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has
two USB ports: QC 3.0A + 2.4A. Connect the power cable with a 2A fuse. Professional installation recommended.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels
360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black.
Made in Sweden.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit
recommends to use tablets on a Pedestal mount or a Brodit headrest mount.
EAN: 7320287472868
NEW!
Item no 747286 fits:
Samsung Galaxy Tab A8 SM-X200/205 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the
attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.
2. Slide the device sideways carefully into the holder. Press the lock sideways onto the left part of the holder.
3. Remove the lock by slidning it sideways away from the holder. Slide the device sideways out of the holder.
4. The holder is in place. Switch between portrait and landscape mode by turning the holder into desired position.