Brodit ProClip 854210 User manual

15 February, 2020, www.brodit.com, © 2020 Brodit AB
Product 854210
854210 ProClip ONLY for manual gear shift.
Angled mount, Low
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288542102
Item no 854210 fits:
Citroen Berlingo Family 08-18 (For Europe)
Citroen Berlingo Transport 08-18 (For Europe)
Peugeot Partner 08-18 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the control panel and the center console,
to widen the gap. Peel off the adhesive tape covers on the ProClip.
2. Press the angled edge on the left part of the ProClip into the gap below the gap opener. Pull out the gap
opener.
3. Press downward on the right side of the ProClip so the angled edge hooks into the center console sidewall.
Press until you hear/feel it snaps into place. Press until you hear feel it snaps into place.
4. The ProClip is in place.