Brodit ProClip 854974 User manual

29 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 854974
854974 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288549743
Item no 854974 fits:
Mercedes Benz E-Class (200-430) Convertible 14-15 (For all countries)
Mercedes Benz E-Class (200-430) Coupé 14-15 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructons and look at the pictures before attaching the ProClip. This ProClip consists of
two parts.
Part 1. Attaching part
Part 2. Mounting plate
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on Part 1. Place Part 1 so the adhesive tape is pointing downward, and press the grooved edge into the
gap between the frame surrounding the display and the panel in front of the display. Press until you hear/feel it
snaps into place.
2. Open the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 so the notch hooks into the upper
part of the air vent and the holes match the holes in Part 1.
3. Attach Part 2 onto Part 1 by using the enclosed screws.
4. The ProClip is in place.
2(2)