Brodit ProClip 854611 User manual

18 March, 2015, www.brodit.com, © 2015 Brodit AB
Product 854611
854611 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
NOTE: This ProClip can NOT be installed together with other ProClips that are placed by the right air vent (item
no 854257 and 854625).
EAN: 7320288546117
Item no 854611 fits:
Volvo XC60 11-15 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the curved edge on the lower part of the ProClip into the gap between the frame surrounding the air vent
and the control panel. Flip the ProClip upward/forward so the curved lower edge goes all the way into the gap
and hooks behind the control panel.
2. Press the upper part of the ProClip downward and then forward into the upper part of the air vent. Keep the
lower part of the ProClip in place in the same position, in the same time pull the upper part toward you so the gap
under the frame surrounding the air vent is widened and the angled upper edge of the ProClip hooks into the gap
under the frame surrounding the air vent.
3. This ProClip can be placed both on the left and the right air vent.
4. The ProClip is in place.
2(2)