Brodit ProClip 855173 User manual

16 December, 2016, www.brodit.com, © 2016 Brodit AB
Product 855173
855173 ProClip
Center mount
The ProClip is a mounting bracket that you attach onto the vehicle’s dashboard. It provides a perfect mounting
platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and
convenient!
The ProClip has a perfect fit, it is custom made for each vehicle to ensure a secure base for installations. And the
ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill
holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed
instructions.
View demo video
EAN: 7320288551739
Item no 855173 fits:
Audi A4 Avant 16-17 (For all countries)
Audi A4 Sedan 16-17 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
This ProClip can be mounted along the full width of the dashboard.
1. Press the thin end of the enclosed gap opener into the gap dividing the center consoler, to widen the gap. Use
the enclosed alcohol pad to clean the area where the ProClip is to be installed. Remove the adhesive tape cover
on the ProClip.
2. Insert the angled upper edge of the ProClip into the gap next to the gap opener. Hook the angled upper edge
into the gap by pressing it forward and at the same time move the lower part forward. Remove the gap opener.
3. Press the lower part of the ProClip upward so the milled lower edge goes into the lower part of the air vent and
the adhesive tape fastens.
4. The ProClip is in place.
2(2)