Brother HL-2700CN Series User manual

Brother Laser Printer
HL-2700CN series
User's Guide
Version 0
For visually-impaired users
You can read this manual with Screen Reader ‘text-to-speech’
software.
You must set up the hardware and install the driver before you can use the printer.
Please use the Quick Setup Guide to set up the printer. You can find a printed copy in the box or view
it on the CD-ROM we have supplied.
Please read this User’s Guide thoroughly before you use the printer. Keep the CD-ROM in a
convenient place so you can use it quickly if you need to.
Please visit our web site at http://solutions.brother.com where you can get answers to Frequently
Asked Questions (FAQs), Product Support and Technical Questions, and the latest Driver Updates
and Utilities.

i
Definitions of warnings, cautions, and notes
We use the following terms throughout this User’s Guide:
You must follow these warnings to prevent possible personal injury.
You must follow these instructions to make sure you use the printer properly and do not damage it.
Remember these useful tips when you use the printer.

ii
To use the printer safely
The fusing unit becomes extremely hot during operation. Wait until it has cooled down sufficiently
before replacing consumable items.
The fusing unit is marked with the caution label. Please do NOT take off or damage the label.
There are high voltage electrodes inside the printer. Before you clean the printer, clear a paper jam
or replace parts, make sure you have turned off the power switch and unplugged the printer from
the AC power outlet/socket.
Do not handle the plug with wet hands - this constitutes an electric shock hazard.
This printer is heavy and weighs approximately 31.5 kg (69.4 lb). When you move or lift this printer,
make sure at least 2 people lift it together.

iii
Iftheprinterbecomeshot,blowssmoke,orgeneratesobscureodor,immediatelyturnoffthepower
switch and unplug the printer from the AC power outlet/socket. Call your dealer or Brother
Customer Service.
If metal objects, water or other liquids get inside the printer, immediately turn off the power switch
and unplug the printer from the AC power outlet/socket. Call your dealer or Brother Customer
Service.
Do not put consumable items such as the toner cartridges and the waste toner pack into a fire.
Some consumable items can be flammable under certain conditions.
Do not look directly at the laser beam light. It might cause damageto your eyesight. Do not remove
or break open the printer's safety interlocks.
Do not run the printer with the top cover, front cover and back covers open and the interlocks
removed.
Do not place any items on the printer.

iv
Printer do’s and don’ts for optimum print quality
Before you move or lift the printer, remove the toner cartridges, waste toner pack and fusing unit
toavoidspills. Be sure to keeptheprinteraslevel as possible. Damage caused byfailuretoremove
the supplies may void your warranty.
Do not touch the rollers of the fusing unit. This can degrade print quality.

v
IMPORTANT: For technical and operational help, you must call the country where you bought the
printer. Calls must be made from within that country.
Register your product
By registering your product with Brother International Corporation, you will be recorded as the original
owner of the product.
Your registration with Brother:
■may serve as a confirmation of the purchase date of your product should you lose your receipt;
■may support an insurance claim by you in the event of product loss covered by insurance; and,
■will help us notify you of enhancements to your product and special offers.
Please complete the Brother Warranty Registration or, for your convenience and most efficient way to
register your new product, register on-line at
http://www.brother.com/registration/
Frequently asked questions (FAQs)
The Brother Solutions Center is our one-stop resource for all your Printer needs. You can download the
latestsoftwareand utilities, read FAQs and troubleshootingtips, and go to the‘Solutions’sectionto learn
how to get the most from your Brother product.
http://solutions.brother.com
You can check here for the Brother driver updates.
Customer Service
In USA: 1-877-284-3238
In Canada: 1-877-BROTHER
In Europe: Visit www.brother.com for contact information on your local Brother office.
If you have comments or suggestions, please write us at:
In USA: Printer Customer Support
Brother International Corporation
15 Musick
Irvine, CA 92618
In Canada: Brother International Corporation (Canada), Ltd.
- Marketing Dept.
1, rue Hotel de Ville
Dollard-des-Ormeaux, PQ, Canada H9B 3H6
Service center locator (USA only)
For the location of a Brother authorized service center, call 1-800-284-4357.
Service center locations (Canada only)
For the location of a Brother authorized service center, call 1-877-BROTHER
Service center locations (Europe)
For service centres in Europe, contact your local Brother Office. Address and telephone contact
information for European offices can be found at www.brother.com and selecting your country from the
pull down list.
Brother fax back system (USA only)

vi
Brother has installed an easy to use fax back system so you can get instant answers to common
technical questions and product information. This is available 24 hours a day, 7 days a week. You can
use the system to send the information to any fax machine.
Call the number below and follow the recorded instructions to receive a fax about how to use the system
and an index of fax back subjects.
In USA only:1-800-521-2846
Internet Addresses
Brother Global Web Site: http://www.brother.com
For Frequently Asked Questions (FAQs), Product Support and Technical Questions, and Driver
Updates and Utilities: http://solutions.brother.com
(In USA Only) For Brother Accessories & Supplies: http://www.brothermall.com

vii
Important information: Regulations
Federal Communications Commission (FCC) Declaration of
Conformity (For USA)
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911
USA
Telephone: [phone]
Important
A shielded interface cable should be used to ensure compliance with the limits for a Class B digital
device.
Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s
authority to operate the equipment.
declares, that the products
Product name: Laser Printer HL-2700CN
Model number: HL-2700CN
Product options: All
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residentialinstallation.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalled
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■Call the dealer, Brother Customer Service, or an experienced radio/TV technician for help.

viii
Industry Canada Compliance Statement (For Canada)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio interference (220 to 240 volt model only)
This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use a double-shielded interface cable with twisted-pair
conductors and that it is marked “IEEE1284 compliant”. The cable must not be more than 2 metres long.

ix
International ENERGY STAR®Compliance Statement
The purpose of the International ENERGY STAR®Program is to promote the development and
popularization of energy-efficient office equipment.
As an ENERGY STAR®Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY
STAR®guidelines for energy efficiency.
Laser Safety (100 to 120 volt model only)
This printer is certified as a Class I laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape from the machine during any phase of user operation.
FDA Regulations (100 to 120 volt model only)
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured
on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One
of the following labels on the back of the printer indicates compliance with the FDA regulations and must
be attached to laser products marketed in the United States.
Caution: Use of controls, adjustments or performance of procedures other than those specified this User’s
Guide may result in hazardous radiation exposure.
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR subchapter J.

x
IEC 60825 specification (220 to 240 volt model only)
This printer is a Class 1 laser product as defined in IEC 60825 specifications. The label shown below is
attached in countries where it is needed.
This printer has a Class 3B laser diode which produces invisible laser radiation in the scanner unit. You
should not open the scanner unit under any circumstances.
Caution: Use of controls or adjustments or performance of procedures other than those specified in this User’s
Guide may result in hazardous radiation exposure.
The following caution label is attached on the cover of the scanner unit.
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
Varning Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Internal laser radiation
Maximum radiation power: 5 mW
Wave length: 780 - 800 nm
Laser class: Class IIIb (Accordance with 21 CFR Part 1040.10)
Class 3B (Accordance with IEC 60825)
For Finland and Sweden
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CLASS 1LASERP RODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
5mW
780nm-800nm
DANGER-
INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
VORSICHT -
UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET UND SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN.
DANGER-
RAYON LASER INVISIBLE LORS DE L’OUVER TURE.
EVITER L’EXPOSITION DIRECTE.
PELIGRO-
RADIACION LASER INVISIBLE AL ABRIR. EVITAR
LA EXPOSICION DIRECTA AL HAZ.
MAS

xi
IMPORTANT - For Your Safety
To ensure safe operation the supplied three-pin plug must be inserted only into a standard three-pin
power outlet that is properly grounded through the standard electrical wiring.
Extension cords used with this printer must be three-pin plug type and correctly wired to provide proper
grounding. Incorrectly wired extension cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is grounded and that
the installation is completely safe. For your safety, if in any doubt about the effective grounding of the
power, call a qualified electrician.
Disconnect device
You must install this printer near a power outlet that is easily accessible. In case of an emergency, you
must disconnect the power cord from the power outlet to shut off the power completely.
Caution for LAN connection
Connect this product to a LAN connection that is not subjected to overvoltages.
IT power system (For Norway only)
This product is also designed for an IT power system with phase-to-phase voltage 230V.
Geräuschemission / Acoustic noise emission (for Germany only)
Lpa < 70 dB (A) DIN 45635-19-01-KL2
Wiring information (for UK)
Important
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating
as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
If in any doubt, call a qualified electrician.

xii
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Apple, the Apple Logo, and Macintosh®are registered trademarks in the United States and other
countries, and TrueType is a trademark of Apple Computer, Inc.
Epson is a registered trademark and FX-80 and FX-850 are trademarks of Seiko Epson Corporation.
Hewlett Packard is a registered trademark and HP LaserJet 6P, 6L, 5P, 5L, 4, 4L 4P, III, IIIP, II, and IIP
are trademarks of Hewlett-Packard Company.
IBM, IBM PC, and Proprinter are registered trademarks of International Business Machines Corporation.
Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in
the U.S. and other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.
ENERGY STAR is a U.S. registered mark.
All other terms and brand and product names mentioned in this User’s Guide are registered trademarks
of their respective companies.
Compilation and Publication Notice
Under the supervision of BrotherIndustries Ltd., this manual has been compiled andpublished, covering
the latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained
herein and shall not be responsible for any damages (including consequential) caused by reliance on
the materials presented, including but not limited to typographical and other errors relating to the
publication.
©2003 Brother Industries Ltd.
Shipment of the Printer
If for any reason you must ship your Printer, carefully package the Printer to avoid any damage during
transit. It is recommended that you save and use the original packaging. The Printer should also be
adequately insured with the carrier.
See Shipping the printer on page 5-29

xiii
“EC” Declaration of Conformity
Manufacturer
Brother Industries Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan
Herewith declare that:
Products description : Laser Printer
Product Name : HL-2700CN
is in conformity with provisions of the Directives applied: Low Voltage Directive 73/23/EEC (as amended
by 93/68/EEC) and the Electromagnetic Compatibility Directive 89/336/EEC (as amended by
91/263/EEC and 92/31/EEC and 93/68/EEC).
Standards applied:
Harmonized: Safety : EN60950:2000
EMC : EN55022:1998 + A1:2000 Class B
EN55024:1998
EN61000-3-2:1995 + A14:2000
EN61000-3-3:1995
Year in which CE marking was First affixed: 2003
Issued by : Brother Industries, Ltd.
Date : 15th May, 2003
Place : Nagoya, Japan
Signature :
Takashi Maeda
Manager
Quality Management Group
Quality Management Dept.
Information & Document Company

xiv
Table of Contents
1 About this printer ....................................................................................................................................1-1
What is in the box? .......................................................................................................................1-1
Front view ...............................................................................................................................1-3
Back view ...............................................................................................................................1-4
Features .......................................................................................................................................1-5
2400 DPI class resolution ...................................................................................................1-5
High speed and color laser printing ....................................................................................1-5
Color Advanced Photoscale Technology (CAPT) ..............................................................1-5
High Resolution Control (HRC) ..........................................................................................1-5
Maintenance-free and economical toner cartridge .............................................................1-5
Universal paper tray ...........................................................................................................1-5
Three interfaces .................................................................................................................1-5
Automatic Interface Selection .............................................................................................1-6
Five emulation modes ........................................................................................................1-6
Automatic Emulation Selection ...........................................................................................1-6
Data compression technology ............................................................................................1-6
Fonts ..................................................................................................................................1-6
Panel lock setting ...............................................................................................................1-7
Power Save Mode ..............................................................................................................1-7
Toner Save Mode ...............................................................................................................1-7
Reprint setting ....................................................................................................................1-7
Network ..............................................................................................................................1-7
Positioning the printer ...................................................................................................................1-8
Power Supply .........................................................................................................................1-8
Environment ...........................................................................................................................1-8
What kind of paper can I use? ....................................................................................................1-10
Type and size of paper .........................................................................................................1-10
Suitable paper specifications ............................................................................................1-10
Recommended paper ...........................................................................................................1-12
Printable area .......................................................................................................................1-13
Portrait ..............................................................................................................................1-13
Landscape ........................................................................................................................1-13
Guidelines for selecting paper ..............................................................................................1-14
Envelopes .........................................................................................................................1-15
Labels and transparencies ...............................................................................................1-17
Paper feed ............................................................................................................................1-18
Tray feed ..........................................................................................................................1-18
Manual feed ......................................................................................................................1-19
Paper output .........................................................................................................................1-19
2 Driver and software ................................................................................................................................2-1
Printer driver .................................................................................................................................2-1
For Windows® ........................................................................................................................2-2
Features in the PCL printer driver ......................................................................................2-2
Basic Tab ...........................................................................................................................2-2
Advanced tab .....................................................................................................................2-3
Accessories tab ..................................................................................................................2-8
Support Tab ........................................................................................................................2-9
Features in the PS printer driver ......................................................................................2-10
Ports tab ...........................................................................................................................2-10
Device Settings tab ..........................................................................................................2-11
Layout tab .........................................................................................................................2-12
Paper / Quality tab ............................................................................................................2-13
Advanced options .............................................................................................................2-14

xv
For Macintosh® ...........................................................................................................................................................................2-16
Software .....................................................................................................................................2-18
Software for Networks ..........................................................................................................2-18
BRAdmin Professional utility ............................................................................................2-18
Driver Deployment Wizard ...............................................................................................2-18
Web BRAdmin ..................................................................................................................2-18
Automatic Emulation Selection .............................................................................................2-19
Automatic Interface Selection ...............................................................................................2-20
Printer settings ............................................................................................................................2-20
Factory settings ....................................................................................................................2-20
3 Control panel ...........................................................................................................................................3-1
Control panel ................................................................................................................................3-1
Buttons .........................................................................................................................................3-2
Go button ................................................................................................................................3-3
Job Cancel button ...................................................................................................................3-3
+ or - button ............................................................................................................................3-3
To move through menus in the LCD ..................................................................................3-3
To enter numbers ...............................................................................................................3-3
Set button ...............................................................................................................................3-3
Back button .............................................................................................................................3-4
Light-emitting diodes (LEDs) ........................................................................................................3-5
Liquid crystal display (LCD) ..........................................................................................................3-6
LCD messages .......................................................................................................................3-6
Printer status messages .....................................................................................................3-7
How to use the control panel ........................................................................................................3-7
Control panel LCD menu ..............................................................................................................3-9
Set date and time .............................................................................................................3-19
Set IP address ..................................................................................................................3-20
About emulation modes ........................................................................................................3-21
List of factory settings ...........................................................................................................3-22
Network factory default setting .........................................................................................3-22
Reprint setting ......................................................................................................................3-26
Reprinting from RAM ........................................................................................................3-26
Reprinting the last job .......................................................................................................3-27
Printing PROOF data .......................................................................................................3-28
Printing PUBLIC data .......................................................................................................3-28
Printing SECURE data .....................................................................................................3-29
When there is no reprint data in memory ....................................................................3-31
To delete the job .............................................................................................................3-31
To cancel the reprint job ................................................................................................3-31
4 Options ....................................................................................................................................................4-1
Optional accessories and supplies ...............................................................................................4-1
Lower tray unit (LT-27CL) ..................................................................................................4-1
Legal tray (LT-27LG) ..........................................................................................................4-1
Duplex unit (DX-2700) ........................................................................................................4-1
CompactFlashTM card .......................................................................................................4-1
SO-DIMM memory .............................................................................................................4-1
Optional fonts package .......................................................................................................4-1
Lower tray unit (LT-27CL) .............................................................................................................4-2
Putting paper in the lower tray unit .........................................................................................4-2
How to install the lower tray unit .............................................................................................4-2
Legal tray (LT-27LG) ....................................................................................................................4-5
How to install the legal tray .....................................................................................................4-5
Duplex unit (DX-2700) ..................................................................................................................4-7

xvi
How to install the duplex unit ..................................................................................................4-7
Guidelines for printing on both sides of the paper ................................................................4-10
Paper orientation for printing on both sides of the paper .................................................4-10
CompactFlashTM card ...............................................................................................................4-11
Inserting the CompactFlashTM card ....................................................................................4-12
SO-DIMM ....................................................................................................................................4-13
Installing additional memory .................................................................................................4-14
Optional fonts package ...............................................................................................................4-16
Optional fonts package (BS-3000) ...................................................................................4-16
Optional barcode fonts package (BT-1000) .....................................................................4-16
Selecting the optional fonts ..................................................................................................4-16
5 Routine maintenance .............................................................................................................................. 5-1
Replacing the consumable items ..................................................................................................5-1
Toner cartridges .....................................................................................................................5-4
Toner nearly empty message .............................................................................................5-4
TONER EMPTY message ..................................................................................................5-4
Replacing the toner cartridges ...........................................................................................5-5
Waste toner pack ....................................................................................................................5-8
Waste toner pack full message ..........................................................................................5-8
Replacing the waste toner pack .........................................................................................5-9
OPC belt cartridge ................................................................................................................5-10
Replace OPC belt cartridge message ..............................................................................5-10
Replacing the OPC belt cartridge .....................................................................................5-10
Fusing unit ............................................................................................................................5-13
Replace fusing unit message ...........................................................................................5-13
Replacing the fusing unit ..................................................................................................5-14
120K kit .................................................................................................................................5-16
120K kit ............................................................................................................................5-16
Replacing the 120K kit .....................................................................................................5-17
Cleaning .....................................................................................................................................5-21
Cleaning the outside of the printer ........................................................................................5-22
Cleaning the inside of the printer ..........................................................................................5-23
Shipping the printer ....................................................................................................................5-29
6 Troubleshooting ...................................................................................................................................... 6-1
LCD messages .............................................................................................................................6-1
Error messages ......................................................................................................................6-1
Maintenance messages ..........................................................................................................6-3
Call service messages ............................................................................................................6-4
Paper jams and how to clear them ...............................................................................................6-8
JAM A1 / JAM A2 (paper jam in the paper tray) .....................................................................6-9
JAM B (paper jam at the entrance to the fusing roller) .........................................................6-10
JAM C (paper jam where the paper comes out of the printer) ..............................................6-12
JAM D (paper jam in the lower part of the duplex unit) ........................................................6-14
JAM E (paper jam in the upper part of the duplex unit) ........................................................6-15
Improving the print quality ..........................................................................................................6-17
Q & A ..........................................................................................................................................6-21
Setting up the printer hardware ............................................................................................6-21
Setting up the printer ............................................................................................................6-22
Paper handling .....................................................................................................................6-23
Printing .................................................................................................................................6-24

xvii
7 Appendix ..................................................................................................................................................A-1
Printer specifications ....................................................................................................................A-1
Printing ...................................................................................................................................A-1
Features .................................................................................................................................A-2
Electrical and mechanical .......................................................................................................A-3
Paper specifications .....................................................................................................................A-4
Paper handling .......................................................................................................................A-4
Media specifications ...............................................................................................................A-4
8 INDEX ....................................................................................................................................................... 1-1

1 - 1 ABOUT THIS PRINTER
1
What is in the box?
When you unpack the printer, check to see that you have all of the following parts:
Figure 1-1
1 Printer
2 Standard Paper Tray (pre-installed)
3 Quick Setup Guide*2
4 CD-ROM*2
5 Toner Cartridges*1 (pre-installed) (Black [TN04BK], Cyan [TN04C], Magenta [TN04M], Yellow
[TN04Y])
6 Waste Toner Pack (pre-installed) [WT-4CL]
7 AC Power Cord*2
8 OPC Belt Cartridge [OP-4CL]
*1 The toner cartridges that come supplied with this printer, are starter toners.
Starter toners, are toner cartridges with up to half the life of the standard toner cartridge, 5000 pages (Black) and 3000 pages (Cyan, Magenta and Yellow) at
approximately 5% print coverage (A4 or Letter size).
*2 In Europe these parts are in the Localization Kit.
About this printer
This printer is heavy and weighs approximately 31.5 kg (69.4 lb). To prevent injuries when moving
or lifting this printer, make sure to use at least two people.
1
3
2
8
7
6
45

ABOUT THIS PRINTER 1 - 2
Depending on the country you live in and the HL-2700CN series model bought, you may have
additional parts not listed above.
The OPC belt cartridge is packed inside a separate box as a starter kit. Wait to unpack the OPC
belt cartridge until immediately before you put it in the printer. Exposure to direct sunlight or room
light may damage the OPC belt cartridge.
We recommend keeping spares of the following consumable items at all times. When these are
exhausted, the printer may stop printing.
■Toner cartridges (TN-04BK, TN-04C, TN-04M, TN-04Y)
■Waste toner pack (WT-4CL)
■OPC belt cartridge (OP-4CL)
Interface cable
■An interface cable is not a standard accessory.
■Some computers have a USB and a parallel port. Please buy the appropriate cable for the
interface you are going to to use.
■Mostparallelcablessupportbi-directionalcommunication,but somemighthaveanincompatible
pin assignment or may not be IEEE 1284 compliant.
■It is recommended to use a parallel interface cable or USB interface cable that is no longer than
6 feet (2 meters).
■When you use a USB cable, make sure it is a high-speed twisted cable (12 Mbps or 480 Mbps),
and that you connect it to the USB connector of your PC.
■Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses a
Hi-Speed USB 2.0 interface.
■Do not connect the USB cable to a non-powered hub or Mac®Keyboard.
Depending on the country where you bought the printer, the power cord may differ slightly from the
one shown in Figure 1-1.