Broyhill TUSCANY DY900C User manual

Big Lots Stores , lnc
Assembly lnstruction
SKU No. : 810455275
ltem No. : DY900C
Description : Broyhill Tuscany Cocktail Table
WARNING
Caution : adult assembly required , Assembly will repuire 2 people.
Assembly on soft surfaces to prevent damage to product finish.
DO NOT use power tools.
CARE AND CLEANING
DO NOT scratch or chip the finish.
DO NOT use abrasive chemicals for cleaning. Clean with mild soap on a soft rag.
Rinse and dry thoroughly.
MAINTENANCE
Check bolts/screws periodically and tighten if necessary.
WARNING: Should this product become damaged, and/or components are
broken or missing, DO NOT USE.
STEVE SILVER COMPANY
ADDRESS: 1000 FM 548, Forney, Texas
Phone: [phone] Ext. 1390
Time zone: 8:00 am - 5:00 pm CTS Monday - Friday
Email: [email protected]
Page 1 of 5 PRINTED IN VIET NAM
TUSCANY
COCKTAIL TABLE
ASSEMBLY INSTRUCTION
ITEM#: DY900C
SKU# 810455275
Need help? We are here for you!
1.866.578.6569
24/7 Toll free

Big Lots Stores , lnc
Assembly lnstruction
SKU No. : 810455275
ltem No. : DY900C
Description : Broyhill Tuscany Cocktail Table
WARNING
Caution: Adult assembly required. Assembly will require 2 people.
Assemble on soft surfaces to prevent damage to product finish.
DO NOT use power tools.
CARE AND CLEANING
DO NOT scratch or chip the finish.
DO NOT use abrasive chemicals for cleaning. Clean with mild soap on a soft rag.
Rinse and dry thoroughly.
MAINTENANCE
Check bolts/screws periodically and tighten if necessary.
WARNING: Should this product become damaged, and/or components are
broken or missing, DO NOT USE.
STEVE SILVER COMPANY
ADDRESS: 1000 FM 548, Forney, Texas
Phone: [phone] Ext. 1390
Time zone: 8:00 am - 5:00 pm CTS Monday - Friday
Email: [email protected]
Page 1 of 5 PRINTED IN VIET NAM

GENERAL INFORMATION, TIPS & TRICKS
1 . Please read the assembly instructions prior to assembling this product.
2 . To avoid damages, assemble this product on a non-abrasive surface such
as capet.
3 . Make sure all bolts and nuts are tightly fastened before the product is used.
4 . Not for commercial use.
5 . Care: Wipe with a damp cloth. Use Furniture polish or lemon oil on the
wood as needed. Avoid prolonged exposure to moisture.
Page 2 of 5 PRINTED IN VIET NAM
Please make sure you have all parts before beginning assembly. Please
wait until all steps are complete before tightening bolts unless directed
differently in the instructions. Two people are recommended for assembly.
Do not put hot pots or objects which are more than 80 degrees
Fahrenheit directly on the table.

Big Lots Stores , lnc
Assembly lnstruction
SKU No. : 810455275
ltem No. : DY900C
Description : Broyhill Tuscany Cocktail Table
Page 3 of 5 PRINTED IN VIET NAM
WOOD PART LIST
HARDWARE LIST
A
TABLE TOP
x 1 pc
COLUMN
x 4 pcs
B C D
MOUNTING
PLATE
x 2 pcs
BOTTOM SHELF
x 1 pc
FLAT WASHER
x 40 pcs
Ø5/16" x 16mm
SPRING WASHER
x 40 pcs
Ø5/16" x 13mm
ALLEN BOLT
x 40 pcs
Ø5/16" x 35mm
ALLEN KEY
x 1 pc
4 x 60 x 21mm
STRAIGHT
ALLEN KEY
x 1 pc
4 x 75mm
1234

Big Lots Stores , lnc
Assembly lnstruction
SKU No. : 810455275
ltem No. : DY900C
Description : Broyhill Tuscany Cocktail Table
Page 4 of 5 PRINTED IN VIET NAM
Step 1 : Attach Mounting Plate (C) to Column (B) using Flat Washer (1), Spring
Washer (2) and Allen Bolt (3). Fully tighten all bolts with Allen Key (4). Note: Make
sure all four Columns are in the same upright direction before attaching them to the
Mounting Plate.
Step 2 : Carefully turn the assembled pieces from Step 1 upside down. With
assistance, place the Bottom Shelf (D) onto Column (B) so the holes are aligned.
Secure Bottom Shelf (D) to Column (B) using Flat Washer (1), Spring Washer (2)
and Allen Bolt (3). Fully tighten all bolts with Allen Key (4).
3
1
24
B
C
B
3
1
24
B
B
D

Step 4 :Turn the assembled table to the upright position. Check that all bolts
are fully tightened. Assembly is now complete.
Big Lots Stores , lnc
Assembly lnstruction
SKU No. : 810455275
ltem No. : DY900C
Description : Broyhill Tuscany Cocktail Table
Page 5 of 5 PRINTED IN VIET NAM
3
1
2
4
A
C
Step 3 : Place the Table Top (A) upside down on the floor with a piece of cloth
or carpet underneath to prevent finish from scratching. With assistance, place the
assembled base from Step 2 onto Table Top (A) Secure the assemble base to
Table Top (A) using Flat Washer (1), Spring Washer (2) and Allen Bolt (3). Fully
tighten all bolts with Allen Key (4).
Note: Please note the direction of the planks on the Table Top (A) when
placing it upside down. Rotate the assembled Base from Step 2 so the planks on
the Bottom Shelf are in the same direction as the planks on the Table Top.