Broyhill D209005600 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: D209005600
SKU# 810499339
BROYHILL GIRARD CANDLE STAND
Need help? We are here for you! 1(866)578.6569 24/ 7 • Toll Free

WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 6 months
WARRANTY:
GENERAL BEST PRACTICES FOR ASSEMBLY:
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
WARNINGS:
• The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the prod-
uct. If in doubt, consult a qualified electrician.
• Do not mix old and new batteries. Do not mix alkaline, standard (Carbon - Zinc), or rechargeable (Nickel - Cadmium)
batteries. If you find any noise, excessive temperature or leakage from a battery, please discard. When not using the
unit for a considerable period of time, disconnect the batteries from the unit for storage. If battery power is weak
during use, switch off the device and dispose of batteries.
• Do not dispose of batteries in fire, batteries may explode or leak.
MAINTENANCE:
• Place 3 AAA batteries into the battery case. Batteries not included.
• Maintenance/cleaning of the lights is limited to the surface exterior, using a dry cloth only.
• Steel components for this table are treated with rust inhibiting paint that protects it from rusting. However, due to the
nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and
thus not covered by the warranty.
2/9

EXPLODED DRAWING
3/9

PARTS LIST
HARDWARE LIST
Label Part Number Description Qty Add Part Image
AA H030050062Screw
Bolt M4*15 1 1
Label Part Number Description Qty Part Image
A P003100049 Lid 1
B P000100225 Base 1
C P005400521 Upper Leg 3
D P005400522 Bottom Leg 3
E P006000032
Lights
Pre-assembled
on B
1
F P006900008
Lampshade
Pre-assembly
on B
1
G P005300067 Foot pad
Pre-assembled 3
4/9

HELPFUL HINTS
• Tools needed and not included
• Separating parts before starting
How many people are needed for the installation
5/9

STEP 1
Assembled View:
1x
3x
6/9
Screw the upper leg (C) to base (B).
Remove try me wire before use.

STEP 2
Assembled View:
3x
7/9
Screw the bottom leg (D) to the
upper leg (C).

STEP 3
Assembled View:
1x
8/9
Remove the pre-assembled screw
bolt (AA), Insert 3 AAA batteries into
battery case with correct polarity as
indicated. Then tighten the cap with
screw bolt (AA).

Assembled View:
STEP 4
1
x
9/9
Put the lid (A) on the base (B).