Broyhill A203030004 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A203030004
SKU#:810544188
SANTA CLARA SOFA/
2PC STORAGE SIDE TABLES
Need help? We are here for you! 1(866)578-6569 24/7 • Toll Free
SANTA CLARA

• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Standing on or misuse of this sofa and side tables may result in damage and injury. Read and follow mfg. assembly
and use instructions. Not intended for commercial use.
• Keep all children and pets away from assembly area.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Sofa Weight limit: 250 lbs per cushion, 750 lbs in total. Side table Weight limit: 200 lbs.
• Use the correct bolts as indicated. All bolts should be hand tight until the complete pieces is assembled (This will make the
assembly process much easier). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
• Before using, clean the furniture completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area and for best results always cover the chair with an outdoor cover.
2/1
*(1(5$/%(6735$&7,&(6)25$66(0%/<
:$51,1*6
:$55$17<
0$,17(1$1&(

3 /1
(;3/2'(''5$:,1*

A 3 Sofa Back 1
B 3 Left Panel 1
C 3 Right Panel 1
D 3 Seat Board 1
E 3 Middle Leg 2
F 3 Seat Cushion 3
G 3 Back Cushion 3
J3 Table Top 2
K 3 Front panel 2
L 3 Back Panel 2
M 3 Left Panel 2
N 3 Right Panel 2
P 3 Bottom panel 2
Q P005300057
Foot pad
Pre-assembled 12
R P005300054 Foot pad
Pre-assembled 2
4 /18
3$576 /,67
Label Part Number Description Qty Part Image

H1 H010010003 Bolt M6*15 20 2
61
12
8
2
H2 H010010087 Bolt M6*20
H3 H010010010 Bolt M6*25
H4 H010010004 Bolt M6*35 8 1
H5 H010010009 Bolt M6*40 4 1
H6 H050020017 Spring
Washer M6 1
H7 H050010025
Flat washer
M6 54 5
H8 H040050029 Nut M6 4 1
HH P005300051 Plastic
Washer M6 4 1
HW H090010017 Wrench M6 2 0
5 /18
+$5':$5(/,67
Add
Label Part Number Description Qty Part Image

• Separating parts before starting
3URYLGHGLQKDUGZ DUHSDFN
How many people are needed for installation?
6 /1
3URYLGHG
+(/3)8/+,176

7/1
(;3/2'(''5$:,1*

Assembled View:
8 /18
Attached Sofa Back (A) to Left Panel
(B) with Bolt (H2) and Flat washer
(H7), tighten the Bolt (H2) to 80%
depth with Wrench (HW).
1x
1x 1x
1x
67(3

Assembled View:
9 /18
Attached Sofa Back (A) to Left Panel
(B), Seat Board (D) to Left Panel (B)
with Bolt (H3) and Flat washer (H7);
Attached Seat Board (D) to Sofa Back
(A) with Bolt (H5) and Flat washer
(H7), tighten the Bolts (H3/H5) to
80% depth with Wrench (HW).
1x
4x 4x 8x
67(3

Assembled View:
10 /18
Attached Sofa Back (A) to Right
Panel (C) with Bolt (H2) and Flat
washer (H7), tighten the Bolt (H2)
to 80% depth with Wrench (HW).
1x 1x
1x
67(3

Assembled View:
11/18
Attached Sofa Back (A) to Right
Panel (C), Seat Board (D) to Right
Panel (C) with Bolt (H3) and Flat
washer (H7), tighten all the Bolts to
100% depth with Wrench (HW) at
last.
4x 4x
67(3

Assembled View:
2x
4x 4x
12/18
Attached Middle Leg (E) to Seat
Board (D) with Bolt (H2) and Flat
washer (H7), tighten all the Bolts to
100% depth with Wrench(HW) at
last.
67(3

Assembled View:
3
x
3x
13/18
Place the Seat Cushion (F) and Back
Cushion (G) on the Seat Board (D),
the product assembly is completed.
67(3

1/1
(;3/2'(''5$:,1*

Assembled View:
2x 2x
2x
8x 8x
15/18
Attached Bottom panel (P) to Left
Panel (M) and Right Panel (N) with
Bolt (H4) and Flat washer (H7),
tighten the Bolt (H4) to 80% depth
with Wrench (HW).
67(3

Assembled View:
8x 8x
2x
1/1
Attached Back Panel (L) to Left Panel
(M) and Right Panel (N) with Bolt
(H1) and Flat washer (H7), tighten
the Bolt (H1) to 80% depth with
Wrench (HW).
67(3

Assembled View:
2x
8x 8x
1/1
Attached Front panel (K) to Left
Panel (M) and Right Panel (N) with
Bolt (H1) and Flat washer (H7),
tighten the Bolt (H1) to 80% depth
with Wrench (HW).
67(3

Assembled View:
2x
8x 4x 4x 12x
4x 4x
1/1
Attached Table Top (J) to Left Panel
(M), Right Panel (N) and Back Panel
(L) with Bolt (H1/H3), Spring
Washer (H6), Flat washer (H7), Nut
(H8) and Plastic Washer(H9),
tighten all the Bolts to 100% depth
with Wrench(HW) at last.
67(3