Broyhill ARDENDALE A213000615 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A213000615
SKU#:810493305
ARDENDALE 3PK HEXAGON
NESTING TABLES
Need help? We are here for you! 1(866) 578-6569 24/7 · Toll Free

• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
• Standing on or misuse of this sofa and side tables may result in damage and injury. Read and follow mfg. assembly
and use instructions. Not intended for commercial use.
• Keep all children and pets away from assembly area.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Weight limit: 200 lbs per table
• Use the correct bolts as indicated. All bolts should be hand tight until the complete pieces is assembled (This will make the
assembly process much easier). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
WARRANTY:
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
MAINTENANCE:
•Before using, clean the furniture completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area and for best results always cover the chair with an outdoor cover.
2/13

EXPLODED DRAWING
3/13

PARTS LIST
HARDWARE LIST
Label Part Number Description Qty Part Image
A P001600095 1
B P005400186 Base 1
C P001800180 Cushion 1
D P001600096 Base Board 1
E P005400187 1
F P001800181 Cushion 1
G P001600097 1
J P005400188 1
K P005300042 Foot pad
Pre-assembled 18
Label Part Number Description Qty Add Part Image
H1 H010010010 Bolt M6*25 12 2
H2 H050010025 Flat washer
M6 12 2
HW H090010017 Wrench M6 1 0
4 /13
Tray
Base Board
Base
Base

HELPFUL HINTS
• Separating parts before starting
How many people are needed for installation?
Provided in hardw are pack
5 /13
Provided

EXPLODED DRAWING
6 /13

STEP 1
Assembled View:
1x
6x 6x
1x
7 /13
Attached Base board
(A) to Base(B)
with Bolt (H1) and Flat washer (H2),
tighten all the Bolts to 100% depth
with Wrench(HW).

STEP 2
Assembled View:
1x
8 /13
Place the Cushion (C) on the base
board
(A), the product assembly
is completed.

EXPLODED DRAWING
9 /13

STEP 3
Assembled View:
1x
1x
6x 6x
10 /13
Attached Base board (D) to Base (E)
with Bolt (H1) and Flat washer (H2),
tighten all the Bolts to 100% depth
with Wrench(HW).

STEP 4
Assembled View:
1x
11/13
Place the Cushion (F) on the base
(D), the product assembly is
completed.

EXPLODED DRAWING
12/13

STEP 5
Assembled View:
1x
1x
13/13
Place the Tray (G) on the Base (J),
the product assembly is completed.