Broyhill ASHFORD User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GBO21-602-5
SKU# : 810493307
ASHFORD 3PC GLIDER SET
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail],[e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten untill the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Chair is for sitting purposes only. Standing on or misuse of chair may result in damage or injury.
Weight limit is 300 lbs ( 136.4 kg). Not intended for commercial use.
MAINTENANCE
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your chair.
In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off season periods.
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

Part No. Part Qty Image Part No. Part Qty Image
1Chair Back 18Short Bolt (M6x15mm) 8
2Seat Panel Frame 19Bolt (M6x28mm) 4
L3 Left Armrest 110 Bolt (M6x36mm) 6
R3 Right Armrest 111 Bolt (M6x41mm) 4
L4 Left Armrest
Support
( with one threaded
hole)
112 Bolt (M6x48mm) 4
R4 Right Armrest
Support
( with one threaded
hole)
113 Washer 26
L5 Left Armrest
Support
( with two threaded
hole)
114 Nut 4
R5 Right Armrest
Support
( with two threaded
hole)
115 Spring Washer 4
6U-shaped Fitting 116 Back Cushion 1
7Chair Base 117 Seat Cushion 1
Tools
PARTS LIST
PARTS LIST:
L3
L4
L5
R3
R4
R5
Tightening Loosing

PRODUCT FRAME MAP
1
7
2
L5
L4
L3
6
R5
R4
R3

STEP 1
PART REQUIRED: L3, R3, L4, R4, L5 & R5
Keep the bolts loose.
Note: After assembled, keep all the threaded holes inwards.
STEP 2
PART REQUIRED: 6, 7
Keep the bolts loose.
STEP 1
STEP 2
12
14
15
X4 X8
X4
13
X4
15
12
14
X8 X8
13
8
7
6
13
13
R3
R4 R5
8
13

STEP 4
STEP 3
PART REQUIRED: 1 & 2
Keep the bolts loose.
PART REQUIRED: L3, R3 & 2
Keep the bolts loose.
STEP 3
STEP 4
10
X2
X2 X2
13
11
1
2
13
11
2
R3
13
11
X2
L3
11 13

PART REQUIRED: 2, L4, R4, L5 & R5
Keep the bolts loose.
PART REQUIRED: 2, 6 & 7
Keep the bolts loose.
6
STEP 5
X6 X6
STEP 6
X4
9
2
9
13
10
7
R4
2
R5
13
10

Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
PART REQUIRED: 16 & 17
Finished!
Caution:
To ensure one's safety during use of this swivel glider, make sure that all of the bolts are completely tightened.
The chair has the ability to swivel and glider; therefore use by young children should be under adult supervised.
STEP 7
17
16

Part No. Part Qty Image Part No. Part Qty Image
1Table Top 18Short Bolt (M6x15mm) 8
2Table Leg 418 Long Bolt (M6x28mm) 4
3Table Tray 113 Washer 12
Tool
PARTS LIST
PART REQUIRED: 1 & 2
Keep the bolts loose.
PARTS LIST:
STEP 1
X8 X8
13
8
2
8
2
22
1
13
Tightening Loosing

Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 2
PART REQUIRED: 1, 2 & 3
Tighten all bolts by using the supplied Tool.
STEP 3
STEP 2
X4 X4
STEP 3
18
13
18
2
22
2
1
3
13