Broyhill Legacy CASTLE PINES A222015200 User manual

Need help? We are here for you! 1 [phone] 24/7 • Toll Free
CASTLE PINES
ASSEMBLY INSTRUCTIONS
ITEM#: A222015200
SKU#: 810493506
CASTLE PINES 6PK DINING CHAIRS

• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Chair is for sitting purpose only. Standing on or misuse of chair may result in damage or injury.
Not intended for commercial use.
• WEIGHT LIMIT 250 LBS(113KG).
• Keep all children and pets away from assembly area.
• Children and pets should be supervised when they are in the area of the Chair construction.
• Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
WARNINGS:
WARRANTY:
WHAT IS COVERED ？
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
MAINTENANCE:
GENERAL BEST PRACTICES FOR ASSEMBLY:
• Before using, clean the Chair completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area.
2/11

EXPLODED DRAWING
3/11

PARTS LIST
HARDWARE LIST
Label Part Number Description Qty Part Image
A Back 1
B Armrest (Left) 1
C Armrest (Right) 1
D Seat 1
E Seat Cushion 1
F P005300060 Foot pad Pre-
assembled 2
G P005300040 Foot pad Pre-
assembled 2
Label Part Number Description Qty Add Part Image
H1 H010030030 Bolt M6*15 6 1
H2 H010030035 Bolt M6*40 2 1
H3 H050020011 Spring
Washer M6 8 1
H4 H050010023 Flat
washer M6 8 1
HW H090030002 Wrench M6 1 0
P001800172
P001600231
P001400304
P001400303
P001500088
4/11

HELPFUL HINTS
• Tools needed and not included
• Separating parts before starting
Provided in hardware pack
How many people needed for the installation work
5/11
Provided

STEP 1
Assembled View:
Attached Back(A) to Seat(D) with
Bolt(H2), Spring Washer(H3) and
Flat washer(H4), tighten the Bolt(H2)
to 80% depth with Wrench(HW).
6/11
1x
1x
2x
2x
2x

STEP 2
Assembled View:
7/11
1x
2x
2x 2x
Attached the Armrest (Left)(B) to Seat(D)
with Bolt(H1), Spring Washer(H3) and Flat
washer(H4), tighten the Bolt(H1) to 80%
depth with Wrench(HW).

STEP 3
Assembled View:
Attached the Armrest (Left)(B) to Back(A)
with Bolt(H1), Spring Washer(H3) and Flat
washer(H4), tighten the Bolt(H1) to 80%
depth with Wrench(HW).
8/11
1x
1x
1x

STEP 4
Assembled View:
Attached the Armrest (Right)(C) to Seat(D)
with Bolt(H1), Spring Washer(H3) and Flat
washer(H4), tighten the Bolt(H1) to 80%
depth with Wrench(HW).
9/11
2x
2
1x
x 2x

STEP 5
Assembled View:
Attached the Armrest (Right)(C) to Back(A)
with Bolt(H1), Spring Washer(H3) and Flat
washer(H4), tighten all the Bolt to 100% depth
with Wrench(HW) at last.
10/11
1x
1x 1x

STEP 6
Assembled View:
Put the Seat Cushion(E) on the
Seat(D).
11/11
1x