Broyhill GBO22-820S User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GBO22-820S
SKU# : 810544472
EASTLAKE ALL WEATHER WICKER
UMBRELLA SIDE TABLE
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail],[e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Pay attention to orientation
Helpful hints provided along the way
WARNINGS:
To avoid hazards caused to the product or people around it, make sure to have weights applied to the base of
the table before you use umbrella with the table.
Fix the steel hoop plate underneath for better holding the weights for umbrella.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product
construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The table is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use.
MAINTENANCE
ALL WEATHER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild
solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
GENERAL BEST PRACTISE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:
GENERAL BEST PRACTICE FOR ASSEMBLY:

PARTS LIST
Part No. Part Qty Image Part No. Part Qty Image
1Table Top 14Table Frame 4
1Steel Hoop Plate 1STEEL HOOP PLATE HAVE BEEN TIED TO THE BOTTOM OF
TABLE FRAME.
STEP 1
PART REQUIRED: 1,2 & 3
PARTS LIST:
STEP 1
PRODUCT FRAME MAP
8
1
2
3
1
2
3
THE STEEL HOOP PLATE CAN REMOVED FOR END TABLE USING ONLY.

STEP 2
PART REQUIRED: 2 & 3
STEP 2
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 2
STEP 3
LOAD THE WEIGHT ( SANDS BAG, STONE AND ETC. )
ONTO THE STEEL HOOP PLATE
WEIGHT MAX 100LBS
TIGHT THE ADJUSTER KNOB TO SECURE THE
UMBRELLA POLE FIXED.
SOLD SEPARATELY