Bruno ELAN SRE-3050G User manual

Operator Manual
ELANSTRAIGHT STAIRLIFT



English/ español / français
www.bruno.com

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
2
Regulatory Information and Specications ..............................3
Safety........................................................4
Circuit Breaker..................................................5
Seating.......................................................5
Operation .................................................. 6-11
Key Operation ...............................................6
Standard Swivel Seat ..........................................7
Optional Power Swivel Seat .....................................8
Optional Power Footrest........................................8
Optional Manual Folding Rail ....................................9
Optional Power Folding Rail ..................................10-11
Battery Charger ................................................12
Charging ..................................................12
LEDs.....................................................12
Transmitters ..................................................13
Maintenance ..................................................14
Troubleshooting ................................................15
Vacation and Long-Term Storage ....................................16
Warranty.....................................................17
Declaration of Conformity .........................................18
TABLE OF CONTENTS
PRODUCT REGISTRATION FORM
Please register your Bruno lift:
• Fill it out online at www.bruno.com/forms/product-registration
Serial Number:
Please note a serial number is found on your Bruno lift. The serial and model number
will be needed for your dealer to le a warranty claim, request parts or service the unit.
Authorized Bruno Dealer:
Bruno products must be installed and maintained by an authorized Bruno dealer, or the
warranty will be null and void.
Arm Rests
(fold up and down)

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
3
REGULATORY INFORMATION and SPECIFICATIONS
This lift is intended to be installed in accordance with the current edition of:
• EN 81-40:2020 Safety rules for the construction and installation of lifts - Special lifts
for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms
intended for persons with impaired mobility
• ASME A18.1:2017 Safety Standard for Platform Lifts and Stairway Chairlifts
• CAN/CSA-B613-00 (R2012) - Private Residence Lifts for Persons With Physical
Disabilities
• ASME A17.5/CSA B44.1 - 2019 Elevator and Escalator Electrical Equipment
• NFPA 70: National Electrical Code®
• CSA C22.1 Canadian Electrical Code
Veriy applicable local codes with the appropriate regulatory authorities.
SPECIFICATIONS
Weight Capacity: 300 lbs. (136 kg)
Control: constant pressure (armrest and two remotes)
Maximum Incline: 45 degrees, specials to 52 degrees
Seat Swivel: 0, 67 and 90 degrees at top landing only
Battery Charger: 230VAC, 50 Hz, 0.35A input; 24VDC, 1A output, continuous monitoring
The SRE-3050G Elan is NOT recommended for these type of users:
•. Those who use a scoot-pivot transfer from a wheelchair without weight bearing through their
legs, whose full body weight is placed on a single stairlift armrest.
•. Those with leg weakness, during stand to sit transfer, whose knees buckle with uncontrolled
lowering to the stairlift seat.
For the above type of users, the SRE-2010 Elite IS recommended.
COMPONENTS OF THE SRE-3050G
Folding, Swivel Seat
(in riding position)
Option: Power Swivel Seat
Arm Rests
(fold up and down)
Folding Footrest
(with obstruction sensors)
Option: Power Footrest
Seat Swivel
Release
UP/DOWN
Paddle Control
Lap Belt
Circuit Breaker
with On/O󰀨 Switch
Keyswitch
4004689 4004689

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
4
SAFETY
FOR YOUR SAFETY
• Read and understand the operating instructions, and all safety precautions prior to
using the SRE-3050G.
• Be sure stairs are clear of objects before operating the stairlift.
• Always be aware of the surface onto which you are stepping as you get on and o the
stairlift.
• Avoid carrying items with you on the stairlift which could hinder movement of the
stairlift up and down the stairs.
• Do not wear LOOSE clothing that could interfere with stairlift movement.
• Fasten your positioning belt before operating the stairlift.
• Make sure the seat is locked in the correct riding position.
• Be sure that the seat swivel path is clear before swiveling in or out of the ride position,
and before repositioning the seat.
• Be certain the seat swivel is locked in place before attempting to get on or o the
stairlift.
• Make certain that there are no obstacles that would prevent complete raising/lowering
of the optional power footrest (if unit is so equipped).
• NON-AMBULATORY USERS: Bruno recommends carrying a cellular or cordless
telephone or an emergency communication device when riding the stairlift while alone
in the house.
Each stairlift is designed to travel down the stairway at a slightly slower speed than is
the case when travelling UP.
The footrest is equipped with obstruction sensors which stop the carriage if an obstacle
is encountered on the stairs.
If this should occur, press the opposite side of the UP/DOWN paddle control (on the armrest)
to run the carriage in the opposite direction. Clear the obstacle from the stairway or rail
then resume travel in the desired direction.
Your SRE-3050G is battery powered and will continue to operate for some time during a
power outage. The length of operation will depend on the battery condition, the length of
the stairs and the weight of the rider.
Only in the event of a prolonged power outage (more than one hour) will it be necessary
to turn the power o (circuit breaker switch on the carriage) and turn o or unplug the
charger from the wall outlet to conserve battery charge.
The power swivel seat option is equipped with current overload sensing to prevent
further seat swivel if a jam is detected.
The power footrest option is equipped with current overload sensing that will cause
the footrest to return to its last position if a jam is detected.
The power folding rail option is equipped with current overload sensing to prevent
damage if an obstruction or jam is detected.

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
5
CIRCUIT BREAKER and SEATING
The SRE-3050G includes a circuit breaker
with a built-in ON/OFF switch located on
the back side of the carriage.
The circuit breaker protects the battery,
controller and motor circuits in the stairlift
carriage.
It is unlikely that this circuit breaker will trip
during normal use. However, if the stairlift
becomes inoperative, check the circuit
breaker as a rst troubleshooting step. Reset
it, if necessary.
Possible causes of circuit breaker tripping:
• foreign object jamming the rail or gear
rack;
• exceeding the rated weight capacity of
the stairlift.
The seat assembly on the SRE-3050G is
designed to swivel and to lock at 0, 67 and
90 degrees.
Pushing down on either side of the swivel
lever allows you to swivel the seat to a
convenient position for transferring into or
out of the seat.
Once you release the swivel lever, the seat
will lock at the next available position.
To lower the seat assembly from a folded
position to the riding position, simply push
down on the seat.
Seating
seat
swivel
lever
seat
swivel
lever
UP/DOWN
paddle control
Circuit Breaker

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
6
OPERATION: Key
The SRE-3050G includes a key and lock to
disable use of the stairlift (see arrow).
Turn the key to its horizontal (ON) position
(rotate clockwise) to allow the unit to operate.
When the key is in its vertical (OFF) position,
the unit cannot be operated using the paddle
switch on the chair or the remote transmitters.
Note: Simply turning the key to its vertical
(OFF) position does not remove all power
from the unit. To remove all power from
the unit, you must turn o the circuit
breaker (page 6).
The key is designed to be removed in either
the horizontal (ON) or vertical (OFF) position.
If you do not need the added security of a key,
Bruno recommends turning the key to the
horizontal (ON) position, removing it from
the carriage and storing it in a safe place.
Key Operation

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
7
OPERATION: Standard swivel seat
The SRE-3050G includes a “soft-start” feature
which prevents the unit from moving abruptly the
instant the UP/DOWN paddle control is pressed.
Press and hold the paddle control for a moment
to begin the gentle acceleration of the stairlift
to operating speed.
1. Position yourself in the seat.
2. Fasten the positioning belt.
3. Depress and hold the seat swivel lever.
4. Rotate the seat so that you are at right
angles to the rail (with your back to
the stairway wall).
5. Release the seat swivel lever to secure
the seat in that position.
A safety switch prevents operation
of the SRE-3050G unless the seat is
locked in position at right angles to the
rail (the “riding” position).
6. Lower both armrests completely.
7. Position both feet securely on the foot-
rest and place your arms on the arm-
rests.
8. Press and hold the paddle control
(located on the front edge of one of
the armrests) to travel UP / DOWN the
rail.
Note: Armrest switch will not function unless-
the positioning belt is latched
9. Once you have reached the top or bottom
landing, release the paddle control.
10. Depress and hold the seat swivel lever as
you rotate to the position for transferring
from the seat.
Note: The seat will only swivel at the top
landing.
11. Release the seat swivel lever and allow
the seat to lock in this position.
12. Unbuckle the lap belt and carefully exit
the seat.
Depressing and holding the paddle
control will cause the carriage to move
until the carriage stops automatically
at the upper or lower end of the stair
rail, or until the switch is released.
Two (2) remotes enable you to move
the carriage to or from either end of
the stair rail.
Remotes are designed to
call / send an empty seat only!
The remotes are NOT designed to move
a seat with a person on board.
Standard Swivel Seat

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
8
OPERATION: Power footrest (optional)
1. Position yourself in the seat.
2. Fasten the lap belt.
3. Position both feet securely on the footrest and place
your arms on the armrests.
4. Press and hold the paddle control (located on the
front edge of one of the armrests) to travel UP /
DOWN the rail.
5. Once you have reached the top or bottom landing,
release the paddle control.
6. To rotate the seat at the top landing, press the
paddle control again on the same side.
7. Release the paddle control when you have fully
rotated out.
8. Unbuckle the positioning belt and carefully exit the
seat.
Notes:
• You may use the remotes to return the rotated power seat
back to the ride position.
• If the unit stops unexpectedly while traveling, check for
obstructions or
excessive loading. You will only be able to run the unit in
the opposite direction until the overload is cleared.
If your unit is equipped with an optional power footrest,
follow the operating instructions indicated below.
1. Raise the seat to raise the footrest to its stored position.
2. Lower the seat to lower the footrest to the ride position.
NOTES:
• Do not try to manually raise or lower the footrest.
Always raise/lower the footrest by raising/lowering
the seat. Failure to follow this instruction could
damage the unit.
• If a jam occurs while raising or lowering the footrest,
the footrest will attempt to return to its last position.
This will produce a sequence error.
To restore normal footrest operation:
 ▫Clearthejam.
 ▫Movetheseatupanddownuntilthefootrest
moves again.
 ▫Ifnormalfootrestoperationisnotrestored,
contact your authorized Bruno dealer.
Power Swivel Seat (optional)
Power Footrest (optional)

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
9
OPERATION: Manual folding rail (optional)
To fold rail UP:
1. Using the handle, gently pull up and toward
the top of the rail.
2. Using the handle, gently lower the folding
rail section to the position shown to the
right.
To fold rail DOWN:
1. Using the handle, gently pull up and toward
the bottom of the rail.
2. Using the handle, gently lower the folding
rail section to the ground.
When folding the rail UP, the carriage MUST be either at the mid-park position or
parked at the top position!
Damage to the carriage WILL occur if the carriage is below the mid-park position
when the rail is folded up.
PINCH POINT!
Make sure the areas above and
below the folding rail are clear
before operating the
folding rail.
Keep children and pets at a safe
distance.
Failure to observe this warning
could result in injury or
damage to equipment.

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
10
OPERATION: POWER folding rail (optional)
Riding the stairlift:
If you are at the top of the staircase,
press the UP / DOWN paddle control to ride
down the rail until you contact the mid-stop,
then release the switch. Look down the
staircase to be sure there are no obstructions
to prevent the rail from lowering!
Note: Armrest switch will not function unless
the positioning belt is latched.
Press the UP / DOWN paddle control again,
in the down direction. The folding rail will
lower. The stairlift will not move down until
the rail folds down completely and touches
the ground. Release the UP / DOWN paddle
control once the rail reaches the ground.
Once the rail is folded down, press and
hold the UP / DOWN paddle control again
until you reach the bottom of the staircase.
If you are at the bottom of the staircase,
ride up until you contact the mid stop, then
release the UP / DOWN paddle control. Look
down the staircase to be sure there are no
obstructions to prevent the rail from folding up!
Press the UP / DOWN paddle control again,
in the up direction. The rail will rise up. The
stairlift will not continue up until the folding
rail is completely folded up.
When the rail is in its fully up position,
release the UP paddle control, then press
it again to travel the rest of the way up the
staircase.
PINCH POINT!
Make sure the areas above and
below the folding rail are clear
before operating the
folding rail.
Keep children and pets at a safe
distance.
Failure to observe this warning
could result in injury or
damage to equipment.
Note:
You will hear a continuous beep whenever
the folding rail is in motion. This is to warn
people nearby of rail operation.
In addition, the yellow LED on the control
panel ashes.
The power folding rail is very similar to the manual folding rail
except it has a motorized actuation built into the rail hinge to
automatically raise and lower the folding section of the rail.
The power folding rail includes a mid-travel stop position.
• If you are above this stop, the rail should always be folded up.
• If you are below this stop the rail should be folded down.
Do not attempt to manually fold the power rail!
Using power from the carriage, fold or unfold the rail:
• by riding the stairlift, or
• by using the remotes
seat
swivel
lever
seat
swivel
lever
UP/DOWN
paddle control

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
11
OPERATION: POWER folding rail (optional)
Using the remotes:
If you are at the bottom of the staircase, use the remote to power the stairlift down.
If the stairlift is above the mid-stop position, the folding rail will not lower
until the chair contacts the mid-stop position.
Once the stairlift has reached the mid-stop position, press the remote DOWN
button again to unfold the rail.
Be sure to stand clear of the rail as it unfolds!
If you are at the bottom of the staircase and want to store the stairlift with the rail
folded up, use the remote to send the stairlift up to the mid-stop position. Then press
the remote UP button again to raise the rail.
Be sure to stand clear of the rail while it folds up!
The power folding rail is equipped with safety features to reduce the chance of injury to
people and pets, as well as damage to property.
If the power folding rail detects an obstruction,
the rail will stop and briey reverse direction.
To resume operation in the desired direction,
1. clear the obstruction,
2. press the armrest switch or remote in
the opposite direction,
3. press the armrest switch again, in the
desired direction.
Disable switch
The control panel includes a disable switch.
Pressing this switch ON prevents the rail from
folding up or down. You would use this
function if you wished to keep the rail folded
down for an extended period of time.
Be sure to press the switch to OFF allow the
rail to fold and unfold correctly under power!
IN AN EMERGENCY ONLY!
Should you need to raise or lower the power
folding rail, and you are unable to do so with
the UP / DOWN paddle control or the remote,
switch the disable switch to OFF. Manually,
and GENTLY, raise or lower the rail.
Make sure to lift slowly where indicated by
the “LIFT HERE” decal on
the short rail. Lifting the rail in
a quick, sudden motion may
result in damage to the
folding rail gearbox.
1. DISABLE/
POWER OFF
DEC-00616
DISABLE
SWITCH
2. LIFT SLOWLY
DEC-00617
LIFT
HERE

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
12
BATTERY CHARGER
Keep the batteries charged to ensure optimal operation of your SRE-3050G.
The batteries are charging whenever the carriage is parked anywhere on the rail.
Failure to keep the batteries charged, or allowing them to fully discharge, will
signicantly shorten the life of the batteries.
Occasionally check the battery charger LED to make sure the stairlift is being charged
correctly.
Charging
LEDS
LED COLOR/
FUNCTION STATUS/PROBLEM REMEDY
red AC power on normal condition when connected to a
live outlet
red (ashing) defective batteries in unit Contact your authorized Bruno dealer
for service.
yellow charging status OK
green battery fully charged/oat
mode charging status OK

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
13
REMOTES
The SRE-3050G hand-held remote may experience certain types of interference caused
by portable and mobile radio frequency (RF) communications equipment. However, the
SRE-3050G uses infrared (IR) communications to minimize the possibility of interference.
Also, receivers are mounted on both sides of the SRE-3050G carriage to minimize interference.
Should interference occur, the unit will stop. This feature has been integrated into the
SRE-3050G to ensure your safety.
The direct line between the remote to either of the two (2) remotes should be clear of
obstacles for optimal operation. It may be necessary to reposition the remotes so that
they are aimed at the carriage.
To reduce the possibility of interference:
• While riding in the seat, ALWAYS operate the elevator using the UP / DOWN paddle
control on the armrest.
• Operating the SRE-3050G with a remote while riding in the seat can lead to signal
interference.
• DO NOT mount the remotes behind an obstacle such as a rail post or around a
corner.
• DO NOT allow direct sunlight to shine on the receivers (blinding the receivers on the
carriage).
• DO replace remote batteries regularly.
- Depleted or nearly-depleted batteries alter the eective range of the remote.
• DO keep the remote and receiver lens free of dirt and debris.
- Use a non-abrasive cleaner suitable for glass or acrylic surfaces.
- Do not use polishes or cleaning products containing wax. These products will
leave a lm on the lens that will reduce the signal transmission range.
Remote Battery Replacement
To replace the batteries in the remotes, remove the access panel on the
back of the remote.
Two (2) AA alkaline batteries required.
Change batteries annually.

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
14
MAINTENANCE
The SRE-3050G is designed to provide many years of reliable service with minimal
maintenance.
For best service life:
• Keep the rail channel clean and free of debris.
• Clean all rail surfaces, except gear rack, with Pledge® lemon polish or similar wax-based
cleaner once per month.
• Keep the battery charger plugged into a live outlet at all times.
• At least once a year, have the stairlift examined, cleaned and lubricated by a
qualied, authorized Bruno dealer.
Seat Upholstery Cleaning
All seating and operator contact areas are fabricated of common materials without
a history of causing operator reactions or irritations. The SRE-3050G has been designed
assuming that the operator will be wearing clothing covering the torso and footwear. If
the user has special sensitivities, normal clothing precautions are suggested.
For day-to-day cleaning, use a mild soap and water solution and a soft, lint-free cloth.
Do not use vinyl conditioners or protectants.
For more dicult stains, use an all-purpose cleaner such as Formula 409® or Fantastik®
and a damp, soft cloth or sponge. Rinse with clean water and dry with a lint-free cloth or
towel.

Bruno Independent Living Aids SRE-3050G OPERATOR 02-10-2023
15
TROUBLESHOOTING
Insert in hole
closest to pivot
pin.
access panel
Your SRE-3050 is not operating correctly. What should you do?
Before calling your Bruno dealer, refer to the solutions listed below. This could save you
an unnecessary service call!
• Seat swivel. Is the seat locked in the riding position?
• Power seat swivel. Did the power seat swivel fail to operate properly?
If so:
- Pivot the access panel out.
- Pull the quick-release pin.
- Manually swivel the seat back to the riding position.
- From the bottom, insert the quickrelease pin into
the hole closest to the pivot pin. The quick-release
pin should pass through the hole in the oset
swivel to lock the seat in position.
- Pivot the access panel back to its closed position.
- Contact your authorized Bruno service technician.
• Footrest. Is there an obstruction on the stairway
that the footrest is contacting?
• Carriage safety panels. Is there an obstruction on the stairway that the carriage
safety panels are contacting?
• Main circuit breaker (or fuse) panel of residence. Has a breaker tripped or a fuse
blown?
• Battery charger. A discharged battery will cause the carriage to move more slowly
until the voltage drops to the point where the controller will shut
o. If this should occur, pause for a moment, then run the carriage
down to exit the seat.
Partially charged batteries will run the carriage down, but not up.
Conrm that the charger is plugged into a live outlet and wait for
the batteries to charge. Red and green LED’s are illuminated.
Is the battery charger plugged into a functional outlet? Do not use
outlets which are controlled by a wall switch.
Is the RED power light on?
Has the circuit breaker of the residence tripped? Has a fuse blown in
the electrical panel of the residence?
• Visual check. Do you notice anything about your stairlift that is dierent or out of
place?
If your SRE-3050 continues to function improperly or not at all after completing the
preceding checklist, contact an authorized Bruno dealer to perform all required
service, repair and maintenance operations.

SRE-3050G OPERATOR 01-17-2023 Bruno Independent Living Aids
16
VACATION AND LONG-TERM STORAGE
If the stairlift will remain unused for an
extended period of time, turn o the circuit
breaker (ON/OFF switch on the carriage),
turn o the battery charger power switch (if
equipped) and unplug the charger from the
wall outlet.
The batteries may require recharging
before normal use if the stairlift
remained in the OFF position for an
extended period of time.
To recharge, turn on the circuit breaker,
reconnect the charger to the wall outlet,
and turn on the battery charger power
switch (if equipped). Then wait until the
charger LED’s indicate that the batteries
are fully recharged.
circuit breaker

Bruno Independent Living Aids SRE-3050G OPERATOR 01-17-2023
17
North America
Bruno Independent Living Aids, Inc.
Attn: Service Department
1780 Executive Drive
Oconomowoc, WI 53066
United States
Tel. [phone] toll free
2023-01-05-indoor-sre-warranty
UK and Europe
Bruno
Unit 5, Millennium Court
Clayhill Industrial Park
Neston, Wirral CH64 3UZ
United Kingdom
Tel. [phone]
BRUNO GOLD LIMITED WARRANTY FOR STAIRLIFT
Limited Lifetime Major Components — 2 Year Parts
Bruno Independent Living Aids, Inc. (Bruno) is condent in its USA-designed and built stairlift units and is pleased
to provide the Original Purchaser of a Bruno Stairlift with the following “Industry Leading” warranty.
The quality of parts used, along with the care of Bruno’s employees in constructing Bruno’s products, allow Bruno
to provide the following warranty coverage to the Original Purchaser of the Bruno Stairlift:
• All Parts, other than Major Components, are/will be free of defects in material and workmanship for a period
of two (2) years after the date of installation by a Bruno Authorized Dealer.
• All Major Components, including the motor, gearbox, drivetrain, and static rail system of the Bruno Stairlift,
are/will be free of defects in material and workmanship for the lifetime of the Bruno Stairlift and as long as
the Original Purchaser owns the Stairlift. Major components do not include optional equipment.
• All labor, to be provided by a Bruno Authorized Dealer, to address any defect of the Bruno Stairlift is covered
for the rst thirty (30) days after installation thereof by a Bruno Authorized Dealer.
• All Bruno warranties begin on the date of installation of the Bruno Stairlift by a Bruno Authorized Dealer, but
that date should be no later than 14 months after it was shipped from the factory.
Bruno Authorized Dealers are trained to evaluate your unique situation and then install the best Bruno Stairlift to
meet your needs. The trained installation and service technicians employed by a Bruno
Authorized Dealer have the appropriate equipment and resources needed to correctly install and maintain the
Bruno Stairlift and should be the rst contact for any warranty or service needs.
WHAT IS NOT WARRANTY COVERAGE:
• Damage to units caused by misuse, abuse, accidents, neglect or modications NOT made by a
Bruno Authorized Dealer.
• Consumable items such as remote batteries
• All labor by a Bruno Authorized Dealer after the rst thirty (30) days since installation.
• Reasonable wear and tear.
ADDITIONAL NOTES:
• All Service and Warranty claims must be brought to the attention of a Bruno Authorized Dealer. To
ensure warranty coverage, all maintenance and repair work on the Bruno Stairlift, other than
maintenance provided by the Original Purchaser as called for in the Operator’s Manual, must be
performed by a Bruno Authorized Dealer.
• In no event shall Bruno be responsible for indirect, incidental or consequential damages, whether such
damages arise based on claims based on contract, warranty, tort (including negligence, strict liability or
product liability).
• Bruno, at its sole discretion, reserves the right to replace, repair, or, if not commercially practical and/or
feasible, elect to refund the Original Purchaser the purchase price of the Bruno Stairlift.
• This warranty gives the Original Purchaser specic legal rights for which the Original Purchaser may also
have other rights that vary from state to state. Bruno specically does not authorize any person to
extend the time or scope of this warranty.
For further information regarding this limited warranty, please contact Bruno using the contact information
shown below:
SRE-2010

SRE-3050G OPERATOR 02-10-2023 Bruno Independent Living Aids
18
2004/108/EC
Electromagnetic Compatibility
Directive
2006/42/EC
Machinery Directive
2006/95/EC
Low Voltage Directive
When installed in accordance to the manufacturer’s specifications and operated in accordance
with manufacturer’s operating instructions.
We hereby appoint:
For: United Kingdom
Bruno Lifts, Ltd.
Unit 5, Millennium Court
Clayhill Industrial Park Neston
Wirral CH64 3UZ
UNITED KINGDOM
For: EU Member Countries
ASCIER SAS
11-13 Rue Charles Cordier
ZA Parc de Bel Air
77164 Ferrières-en-Brie
FRANCE
BY:
EN 81-40:2020
EN 60204 Part 1:2016
EN 60335 Part 1:2020
EN ISO 12100-2:2010
EN ISO 13857
EN 61000
REVISION: 09 February 2023_SRE-3050
BY: WWB
CE & UKCA DECLARATION OF
CONFORMITY CERTIFICATE
W e:
Bruno Independent Living Aids, Inc.
Headquartered at:
1780 Executive Drive
Oconomowoc, WI 53066 USA
An ISO-9001:2015 registered company
Declare that under our sole responsibility, our manufactured product:
MODEL: SRE-3050G Elan Straight Rail Inclined Stairlift
has been designed and tested to meet (where applicable) the following laws, directives,
specifications and standards pertaining to the Machinery Directive for Powered Inclined Stairlifts
for those who have physical impairments:
DIRECTIVES STANDARDS
EN 954 Part 1:1996EN
ISO 12100-1:2010
EN 349:2008
CISPR 11
William W . Belson III Robert J. Hambleton
Director of Engineering Technical Director
To act as Responsible Manufacturer’s Representative.
Date of Issue: 12 February 2023
Location: Oconomowoc, WI USA Neston, Wirral, UK