Burlington B7ES User manual

Parts supplied:
1
B1 - 2
Roll Top Basin Stand B7ES
Roll Top Basin Stand B8ES
Roll Top Basin Stand B9ES
Roll Top Basin Stand B10ES
Important
• Please unwrap and check it carefully to ensure it has not been damaged in handling or transport.
• Please check that all parts have been supplied.
• Assemble basin stand on a mat to protect against scratch the surface.
• Installation should be completed by a suitably competent person.
• The wall fixings supplied may not be suitable for your installation. You may need to source alternatives depending
on the material and strength of the wall you are fixing to.
• Please dispose of packaging in a responsible manner.
Maintenance
Clean with a damp cloth and washing up liquid or other mild detergent. Do not use strong detergents or cleaners
containing abrasives which may scratch the surface.
Ø8mm
Tools required:
2

B2 - 2
4
78
35
6
Ø8mm
7a
7b
Place the basin in position, check for level.
After level, position the basin bracket against the wall, to
support the basin weight (see diagram below), mark the
fixing holes position onto the wall.
Drill holes, insert rawl plugs, fix the basin bracket onto the
wall. (Rawl plugs, screws are not supplied in the box)
Silicone is advised
to spread at the top
of the adjustment
head.
Optional:
4x
Before installing onto the wall, ensure the 2 bottom feet
have been inserted.
Place the basin in position ensuring that it is level.
The basin must be fixed to the wall using the
supplied basin brackets or other appropriate method.
For the height requirement,
if necessary the pipes can
be cut at this end.