Burlington Riviera RIV20 User manual

Important
INSTALLATIONINSTRUCTIONS
• We recommend that this product is installed by a qualified professional contractor. Such as a plumber who is certified by NVQ
(National Vocational Qualification) or SNVQ (Scottish National Vocational Qualification) Level 3.
• Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make
sure this product is the correct model and you have all the parts required for installation and using.
Riviera handset & hose & elb ow –
- RIV20
• Please read these instructions carefully and keep it for future reference.
Dimension
1 - 2 A

2 - 2
34
SHOWER HANDSET
HOSE CONE END
WASHER
HOSE
NUT END
WASHER
ELBOW
SCREW
SHOWER
HOOK
WALL PLUG
1 2
WALL
INLET PIPE
ELBOW
TAIL
A
Installation
1. Connect the elbow with the water inlet pipe inside the wall (see Fig 1). Wind a suitable sealing tape on the tail to ensure water
tightness.
2. Separately connect the hose with the shower handset & the elbow (see Fig 2 & 3).
3. Make sure the shower hook at a suitable position, then fix it onto the wall (see Fig 4). The friction of the bracket can be adjusted
by tightening / loosening the brass cover.
Maintenance
We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula
too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and dried with a soft cloth.
BRASS COV ER