Cal-Royal N-CVRESC User manual

N-77CVR / N- 98 CVR



  
   
   
Lockable Nesc No Cylinder Pull when Key unlock
Lever Trim Trim Always Push bar locked down Nesc Lever,
Key locks & Operable Dummy Nesc Lever Key remained
Unlocks Lever Trim on Cylinder unless
Locked. Cylinder
Nesc Lever Trim
13 function 15 function 10 function 04 function
Entrance Passage Dummy Storeroom
   
   
   
   
(4)   (4)
  
 
1/2DRWG.# EDG-4014 20220826

N-CVRESC Lever Trim For N-77CVR / N-98CVR Series
Method of Change Handing of Lever LHR(Revee Step for RHR)
1.Rotate lever to LHR
positioned at go0
•
1.Rotate lever to RHR
positioned at go0 •
2.Place and fasten cam piece with locked type
washer and screw.
2.Place and fasten cam piece with locked type
washer and screw.
20220826
3.Done.
3.Done.
DRWG.# EDG-4014
2/2