Cal-Royal N-FMR7700 Series User manual

CAL-ROYAL

BEFORE INSTALLING DEVICE, PLEASE CHECK:






 
  




1. PREPARE DOOR AND MOUNT LOCK


    











 

3. APPLY EXTERIOR TRIMS

4. APPLY RAIL ASSEMBLY

 







I f �:
i • · , ( !�
  
 





 
 


  
2. ATTACH CHASSIS TO DOOR













 







i
 

5. APPLY COVER AND STRIKES


 


 
 




(2) 

 



DRWG. # EDG4026 1-2


TO CHANGE HANDING OF N-FMR77 EXIT DEVICE
1. LHR
2-3.
2-1.
2-2.
Remove chassis pin &
main slide & tube.
Remove lift lever &
lift lever pin.
Rotate 180° main slide
& lift lever
main slide
tube
lift lever
chassis
pin
lift lever
pin
fixed screw
3-1. Reassemble lift lever at
opposite side, as shown.
3-2. Replace main slide and
chassis pin and lift lever pin.
and fixed screw.
1. RHR Done.
main
slide
tube
chassis
pin
lift
lever
lift lever
pin
fixed
screw
2-2 