Calibre Fitness CF-HCP User manual

HALF CAGE PEC ATTACHMENT
Owner’s Manual
CF-HCP

2
Important Safety Information 3
9-4ylbmessA
01tsiLstraP
11weiVdedolpxE
Table of Contents

Important Safety Information
3
Prior to assembly, remove components from the box and verify that all the listed parts were
supplied.
WARNING!
Before using this unit or starting any exercise program, consult your
physician. This is especially important for persons over the age of
35 and/or persons with pre-existing health problems. The
Products LP assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit
have read the Owner’s Manual and are familiar with safety informa-
tion and precautions.
SAFETY PRECAUTIONS
• This unit should only be used on a level surface and is intended for
indoor use only. We recommends an equipment mat be
placed under the unit to protect the floor or carpet and for easier
cleaning.
• Wear comfortable, good-quality walking or running shoes and
appropriate clothing. Do not use this unit with bare feet, sandals,
socks or stockings!
• Always examine your unit before using to ensure all parts are in
working order.
• Do not leave children unsupervised near or on the unit.
NOTE:Hand tighten bolts and nylon nuts until machine is fully assembled.
Read all precautions and instructions in this manual before using this equipment.
!CAUTION

Assembly
4

STEP 1
Assemble Middle Upright to Half Cage structure using:
1 x (4) Middle Upright
2 x (12) Washer
1 x (20) Bolt
1 x (17) Nylon Lock Nut
Note: Use bolt assembly from Half Cage Lat Attachment to
secure bottom of Middle Upright (4).
5
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 2
Connect Pec Dec Arm Mount (4) using:
2 x (10) Bolt
4 x (12) Washer
2 x (17) Nylon Lock Nut
6
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

7
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly
STEP 3
Connect Arms (2,3) to Pec Dec Arm Mount (4) using:
2 x (14) Big Washer
2 x (13) Bolt
2 x (19) Plug
Note: Bushing (8) will already be installed on unit.

STEP 4
Place Pec Dec Cable (18) into positions using:
3 x (9) Big Pulley 3 x (17) Nylon Lock Nut
3 x (11) Bolt 6 x (12) Washer
1 x (5) Swing Pulley Bracket 1 x (21) Low Pulley Cable
8
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 5
Attach all pads (6,7) using:
6 x (10) Bolt
6 x (12) Washer
9
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

Ref # Part # Description Qty
AHALF CAGE 1
1 223-00893 PEC DEC ARM MOUNT 1
2 223-00894 LEFT ARM 1
3 223-00895 RIGHT ARM 1
4 223-00896 MIDDLE UPRIGHT 1
5 219-00245 SWING PULLEY BRACKET 1
6 228-00205 BACK PAD 1
7 228-00206 ELBOW PAD 2
8 202-00016 BRONZE BUSHING 4
9 223-00228 BIG PULLEY 3
10 202-00650 ALLEN BOLT M10X70 8
11 202-00125 ALLEN BOLT M10X50 3
12 202-00223 WASHER 10 18
13 202-00644 ALLEN BOLT M10X20 2
14 202-00229 BIG WASHER 10 2
15 206-00461 BUMPER 1
16 229-00064 CABLE END HOLDER 2
17 202-00091 NYLON LOCK NUT M10 6
18 229-00063 PEC DEC CABLE 1
19 206-00391 PLUG 50.8 6
20 202-00293 ALLEN BOLT M10X75 1
21 229-00116 LOW PULLEY CABLE 1
10
Parts List

Exploded View
11