Calibre Fitness CF-PCL User manual

POWER CAGE LAT ATTACHMENT
Owner’s Manual
CF-PCL

2
Important Safety Information 3
9-5ylbmessA
01tsiLstraP
11weiVdedolpxE
Table of Contents

Important Safety Information
3
Prior to assembly, remove components from the box and verify that all the listed parts were
supplied.
WARNING!
Before using this unit or starting any exercise program, consult your
physician. This is especially important for persons over the age of
35 and/or persons with pre-existing health problems. The
Products LP assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit
have read the Owner’s Manual and are familiar with safety informa-
tion and precautions.
SAFETY PRECAUTIONS
• This unit should only be used on a level surface and is intended for
indoor use only. We recommends an equipment mat be
placed under the unit to protect the floor or carpet and for easier
cleaning.
• Wear comfortable, good-quality walking or running shoes and
appropriate clothing. Do not use this unit with bare feet, sandals,
socks or stockings!
• Always examine your unit before using to ensure all parts are in
working order.
• Do not leave children unsupervised near or on the unit.
NOTE:Hand tighten bolts and nylon nuts until machine is fully assembled.
Read all precautions and instructions in this manual before using this equipment.
!CAUTION

Assembly
4

STEP 1
5
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly
Complete Guide Rod assem-
bly as shown using:
2 x (7) Guide Rod
1 x (5) Weight Slide Support
2 x (16) Bumper
2 x (35) Washer M10
2 x (27) Bolt M10x25

STEP 2
Attach Bar Hook (4) to Top Frame (2) using:
1 x (30) Bolt M10x65
2 x (35) Washer M10
1 x (36) Nylon Lock Nut M10
6
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 3
Complete Top Frame assembly as shown
using:
2 x (27) Bolt M10x25
4 x (34) Washer M12
2 x (33) Bolt M12x75
4 x (35) Washer M10
2 x (37) Nylon Lock Nut M12
7
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 4
Connect Rear Base Frame (1) and Foot Brace (3) to KF-PC as
shown using:
2 x (32) Bolt M12x110
4 x (34) Washer M12
2 x (37) Nylon Lock Nut M12
8
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

Complete Bottom Frame assembly as shown using:
2 x (28) Bolt, M10x110
4 x (35) Washer, M10
2 x (36) Nylon Nut, M10
Connect the High and Low Pulley Cables (10,11) as shown
above using:
2 x (29) Bolt, M10x50
4 x (35) Washer, M10
2 x (31) Bolt, M10x70
2 x (19) Pulley Spacer
2 x (36) Nylon Locknut M10
9
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly
STEP 5

10
Ref # Part # Description Qty
Parts List
21MREHSAW22200-202
01MREHSAW39000-202
01MTUNNOLYN19000-202
21MTUNNOLYN29000-202
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
1
1
1
1
2
2
1
1
1
1
2
1
1
4
2
4
2
4
2
6
4
2
4
4
1
4
1
4
1
2
2
2
8
20
8
4
223-00912 REAR BASE FRAME
223-00913 TOP FRAME
223-00914 FOOT BRACE
219-00249 LAT BAR HOOK GYM
223-00055 SLIDE WEIGHT SUPPORT
219-00006 PULLEY PLATE
223-00091 GUIDE RODS
223-00092 LAT BAR GYM
223-00099 SHORT BAR
229-00020 HIGH PULLEY CABLE
229-00019 LOWER PULLEY CABLE
210-00123 SPRING CLIP
229-00090 CHAIN, LONG
229-00091 CHAIN, SHORT
210-00032 PEAR HOOK
206-00026 WEIGHT BUMPER
206-00394 PLUG, 50.8X76.2 SERIES
206-00016 ROUND PLUG 48
202-00098 LONG PULLEY SPACER
206-00028 ROUND BUMPER
223-00228 BIG PULLEY 4.5"
206-00188 PLASTIC SLEEVE, 44.5X25
202-00215 NON SLIP PAPER
206-00103 LAT BAR GRIP
219-00326 SPRING COLLAR PLASTIC GRIPS
202-00048 JAM NUT 1/2"
202-00662 SCREW, BUTTON HEAD SOCKET CAP M10X25
202-00663 SCREW, BUTTON HEAD SOCKET CAP M10X35
202-00664 SCREW, BUTTON HEAD SOCKET CAP M10X50
202-00665 SCREW, BUTTON HEAD SOCKET CAP M10X65
202-00637 SCREW, BUTTON HEAD SOCKET CAP M10X70
202-00666 SCREW, BUTTON HEAD SOCKET CAP M12X110
202-00667 SCREW, BUTTON HEAD SOCKET CAP M12X75

11
Exploded View