Calibre Fitness CF-HCL User manual

HALF CAGE LAT ATTACHMENT
Owner’s Manual
CF-HCL

2
Important Safety Information 3
8-4ylbmessA
9tsiLstraP
01weiVdedolpxE
Table of Contents

Important Safety Information
3
Prior to assembly, remove components from the box and verify that all the listed parts were
supplied.
WARNING!
Before using this unit or starting any exercise program, consult your
physician. This is especially important for persons over the age of
35 and/or persons with pre-existing health problems. The
Products LP assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit
have read the Owner’s Manual and are familiar with safety informa-
tion and precautions.
SAFETY PRECAUTIONS
• This unit should only be used on a level surface and is intended for
indoor use only. We recommends an equipment mat be
placed under the unit to protect the floor or carpet and for easier
cleaning.
• Wear comfortable, good-quality walking or running shoes and
appropriate clothing. Do not use this unit with bare feet, sandals,
socks or stockings!
• Always examine your unit before using to ensure all parts are in
working order.
• Do not leave children unsupervised near or on the unit.
NOTE:Hand tighten bolts and nylon nuts until machine is fully assembled.
Read all precautions and instructions in this manual before using this equipment.
!CAUTION

Assembly
4

STEP 1
Connect Lower Support (1), Footbrace (8) and Pulley Bracket
(9) to Half Cage using:
3 x (19) Bolt M10x70
8 x (20) Washer 10
5 x (21) Nylon Lock Nut M10
2 x (27) Bolt M10x95
5
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 2
Assemble weight carriage structure using:
2 x (6) Guide Rod
1 x (4) Slide Weight Support
4 x (11) Plastic Sleeve
2 x (12) Bumper for Weight
1 x (2) Weight Base (Not Labeled)
2 x (20) Washer 10
2 x (25) Bolt M10x20
Note: Bolts (25) will need to be tightened before moving to
STEP 3.
Secure Weight Base (2) to Half Cage using:
1 x (2) Lower Support 2 x (21) Nylon Lock Nut
2 x (28) Bolt M10x95 4 x (20) Washer 10
6
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 3
Connect Top Frame (4) to Half Cage and Guide Rods (7) using:
2 x (22) Bolt M12x80 2 x (25) Bolt M10x20
4 x (23) Washer M10 2 x (20) Washer 10
2 x (24) Nylon Lock Nut M12
Place High Pulley Cable (34) into positions using:
5 x (14) Big Pulley 4 x (21) Nylon Lock Nut
6 x (18) Big Pulley Spacer 2 x (26) Bolt M10x50
10 x (20) Washer 10 2 x (13) Plate for Pulley
3 x (19) Bolt M10x70
Place Low Pulley Cable (35) into positions using:
4 x (14) Big Pulley 4 x (21) Nylon Lock Nut
1 x (18) Pulley Bracket 2 x (19) Bolt M10x70
4 x (26) Bolt M10x50 8 x (20) Washer 10
7
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 4
Connect all attachments using:
2 x (30) Pear Hook
1 x (15) Long Bar
1 x (8) Footbrace
1 x (32) U Pin
1 x (10) Chain
1 x (5) Short Bar
5 x (17) Plug
8
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

ytQnoitpircseD#traP#feR
AHALF CAGE 1
1 223-00897 LOWER SUPPORT 1
2 223-00898 WEIGHT BASE 1
3 223-00899 TOP FRAME 1
4 223-00055 SLIDE WEIGHT SUPPORT 1
5 223-00901 LONG BAR 1
6 223-00056 GUIDE ROD 2
7 210-00123 SPRING CLIP 2
8 219-00366 FOOTBRACE 1
9 219-00482 PULLEY BRACKET 1
10 229-00111 CHAIN 1
11 206-00188 PLASTIC SLEEVE 44.5X25 4
12 206-00026 BUMPER FOR WEIGHT 2
13 219-00006 PLATE FOR PULLEY 2
14 223-00228 BIG PULLEY 9
15 223-00099 SHORT BAR 1
16 206-00016 PLUG 48 2
17 206-00394 PLUG 50.8X76.2 5
18 202-00385 BIG PULLEY SPACER 6
19 202-00650 ALLEN BOLT M10X70 5
20 202-00223 WASHER 10 34
21 202-00091 NYLON LOCK NUT M10 15
22 202-00651 ALLEN BOLT M12X80 2
23 202-00222 WASHER 12 4
24 202-00092 NYLON LOCK NUT M12 2
25 202-00644 ALLEN BOLT M10X20 4
26 202-00125 ALLEN BOLT M10X50 6
27 202-00652 ALLEN BOLT M10X100 2
28 202-00653 ALLEN BOLT M10X95 2
29 206-00103 GRIP 4
30 210-00032 PEAR HOOK 3
31 219-00326 PLASTIC SLEEVE FOR SPRING CLIP 4
32 210-00146 U PIN 1
33 202-00048 JAM NUT 1/2"-12 1
34 229-00014 HIGH PULLEY CABLE 1
35 229-00013 LOW PULLEY CABLE 1
9
Parts List

Exploded View
10