Campania FT-229 User manual

FT
-
229 Cascading Hosta Fountain
R
evised
April 6, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
Approx.8”of½”non-kinktubing (1)
Wedges(2)
Hose clamps(3)*
*Hoseclamps maybe used asflow restrictors
FOUNTAININFORMATION:
Thisfountain holdsapproximately6gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible witha#10Refill Device
(Aspecialstopper isrequiredforthe refill device.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

FT
-
229 Cascading Hosta Fountain
R
evised
April 6, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof305poundswith
anapproximate3square foot footprint.
FT-73C(188lbs)
27”Lx18”Wx8.25”H
FT-229B(17lbs)
10”Lx7”Wx5.75”H
FT-229A(48 lbs)
20”Lx14”Wx9.5”H
1. Place thebase(FT-73C) intoposition wherethefountain
will beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2”non-kink tubing
to thepumpoutlet.
b. Place ahoseclampover theother endofthe1/2"
non-kinktubing
c. Place thestopper aroundthepumpcord
approximately8”fromthepump.
3. Feedthepumpcordthrough theholeandchannelinthe
basin(FT-73C).
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Place thepumpcover(FT-229B) over thepump.
6. Position thewater feature(FT-229A)over thepumpcover
(FT-229B).
7. Securetheother end ofthe1/2”non-kinktubing ontothe
copperpipeprotrudingfromthebottomofthewater feature
(FT-229A)and tightenthehoseclamp.
8. Carefullylower thewater feature (FT-37A)into thebasin.
9. Fillthefountainwithwater.