Campania Precipice Fountain FT-126 User manual

F
T
-
126 Precipice
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
March31, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK500 pump (1)
#7 stopper(1)
Approx.12”length of1/2”BlackNon-Kinktubing (1)
CopperSpiller(1)
2.8 oztubeofsilicone (1)
Wedges(2)
Hose clamps(3)
*Hoseclamps maybe used asflow restrictors
**Tubing is preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately10 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #7 Device and LEDKit
(A different style stopper mayberequestedfor therefilldevice.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF525 - 525GPH Pump
16 FTcord length

F
T
-
126 Precipice
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
March31, 2017
Assemble yourfountain on a levelsurface capable ofholdinga minimumof700 poundswith an approximate5.25 square
footfootprint.
FT-126D(264lbs)
50”Lx15”Wx9”H
FT-126A(344lbs)
35”Lx8”Wx30”H
FT-126B (2lbs)
5.25”Wx1.5H
FT-126C (2lbs)
6”Lx11”Wx1”H
1. Positionthe basin(FT-126D)wherethefountainistobe installed, ensuring
thatitislevel.
2. Assemble the fountain plumbing
a. Usingahoseclamp, attachthe1/2”non-kinktubingtothepumpoutlet.
b. Place thestopper aroundthepumpcord approximately6”fromthepump.
3. Feed the pump cordallthe waythrough the hole inthebasin and run the
cordthrough the channelinthe bottomto ensurethe fountain will be level.
4. FIRMLY press the stopperintothe hole evenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto
pressthe stopperin place.
5. Positionthe waterfeature (FT-126A)inside thebasinwiththe copperpipe
pushed backagainstthe stopsinthe basin (FT-126D).
6. Use a hose clamp to securethe loose end ofthe non-kinktubingtothe
copperpipe protrudingfromthe waterfeature (FT-126A).
7. Use the siliconeprovided to securethe copperspillerto the frontvertical
edge ofthe waterfeature (FT-126A).
a. Be sure to wipe awayanyexcesssilicone.
8. Placethe disc(FT-126B)overthe pipe inside thetop ofthe waterfeature
(FT-126A).
a. Note:Thisdisc ismeanttopreventsplashingand create an even
flowofwater.
9. Placethe pump cover(FT-126C)overthe pump
10. Letthe fountain sit24 hoursbeforefillingwith water.