Campania Segovia FT-301 User manual

FT
-
301 Segovia Fountain
Three people are recommended for the installation ofthisfountain!
Revised
July26, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
PumpKitParts List
PK300 pump(1)
#5 wingnutdrainstopper (1)
#7 wingnutdrainstopper (1)
Approx. 12”lengthof 1/2” Blacknon-kinktubing(1) **
Approx. 2”lengthof 5/8” clear vinyltubing (1)**
Approx. 2”lengthof 1/2” CPVC pipe (1)
Approx16” lengthof 3/8”rebar(2)
Hose clamps(2)
Wedges (4)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Device and LEDKits
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

FT
-
301 Segovia Fountain
Three people are recommended for the installation ofthisfountain!
Revised
July26, 2017
Assembleyourfountainon alevelsurface capableofholdingaminimumof899 pounds with an approximate6
square footfootprint.
FT-301C(520 lbs)
42”Lx21”Wx16”H
FT-301A(190 lbs)
41”Lx9.25”Wx29.5”H
FT-301B(22lbs)
10”Lx6”Wx14.25”H
1. Place thebasin (FT-301C) intopositionwhere the
fountain will beinstalled, ensuring thatit islevel.
2. Assemblethepumpkit.
a. Connectthetubingassemblyto thepumpby
fittingthetubingoverthepumpwater outlet.
3. Laythepumpcordover thechannelatthetop/backof
thebasin(FT-301C).
4. Place the#7drainstopper intotheholein thebottomof
thebasin.
5. Place thegalvanizedpipesintotheholesatthetop2
backcornersofthebasin.
6. Carefullyliftthewater feature (FT-301A)andplace it
downontothebasinsothatthegalvanizedpipegoes
into theholesatthebottomofthewater feature.
a. Be sure nottopinchthepumpcordbetweenthe
water feature and thebasin.
7. InserttheCPVCendofthetubingassembly intothe
CPVCcouplinginthebottom/center ofthewater
feature (FT-301A).
8. Place the#5drainstopper intothebowlon thewater
feature.
9. Place thepumpcover(FT-301B) intopositionover the
pumpandinfrontofthetubingassembly.
10.Fillthefountainwithwater.