Campania FT-324 User manual

FT
-
324
AvondaleFountain
Two people are recommended for the installation ofthisfountain!
Revised
July18, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK800 pump (1)
#10 stopper(1)
#7 Drain stopper(1)
CPVCWaterflowassembly(1)
21/2"lengthof 1/2" CPVCpipe (2)
1/2" CPVCT-Connectors(1)
1/2" CPVC90*Elbows (2)
1" lengthof 1/2"CPVCpipe (2)
15”length of1/2”BlackNon-Kinktubing(1)**
2”length of5/8”clearvinyltubing (2)**
2”length of3/4"clearvinyltubing (1)**
2”length of1/2"PVCpipe (1)**
Wedges(2)
** Tubing has been preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately15 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Device
(A different style stopper mayberequestedfor thispart.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPP800 - 800GPH Pump
16 FTcord length

FT
-
324
AvondaleFountain
Two people are recommended for the installation ofthisfountain!
Revised
July18, 2018
Assembleyourfountain onalevelsurface capableofholdingaminimumof250poundswith
anapproximate3square foot footprint.
FT-321B(186lbs)
28.25”Lx16.25”Wx13”H
FT-323A(35 lbs)
24”Lx12”Wx2”H
A-607 Looking straight(1lb)
5”Lx3”Wx3”H
A-608 Beakunderwing(1lb)
5”Lx3”Wx3”H
A-609 Looking toside(1lb)
5”Lx3”Wx4”H
1. Position thebasin (FT-321B) where thefountain is to be
installed, ensuringthatitislevel.
2. Assemblethepumpkit.
a. Attachthepumpadapterprovidedtothepump.
b. Fit the3/4"endofthetubingassemblyto the
pump.
c. Place thestopper aroundthepumpcordabout6”
fromthepump.
3. Feedthepumpcordall thewaythroughtheholeandthe
channelin thebasin(FT-321B) to ensurethefountain
will belevel.
4. FIRMLY pressthestopper intotheholeevenly.
a. Note: Usingthehandleofascrewdriveror
hammer works best.
5. Ontheundersideofthewaterfeature(FT-323A),
connecttheCPVCWater flowassemblyinto the2
protruding couplings.
6. Holdingthewaterfeature(FT-323A)over thebasin
(FT-321B),inserttheCPVCend ofthetubingassembly
into theWater flowassembly.
7. Center thewater feature (FT-323A)into basin(FT-
321B).
8. Fillthefountainwithwater.
9. Place the3birds(A-607, A-608, andA-609)onthe
water feature (FT-323A).