Campania Zen Plinth FT-202 User manual

FT
-
202ZenPlinth
Fountain
Revised
March27, 2019
Pump KitPartsList
PK140 Pump (1)
#7 stopper(1)
8”length of1/2”BlackNon-Kinktubing (1)**
1 1/2”length of5/8”cleartubing (1)**
1 1/2”length of1/2”CPVC pipe**
Hose clamps(1)*
*Hoseclampsmaybe used as flow restrictors
** Tubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately3gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Notrecommended for use with refillkits or LED
lightkits.
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

FT
-
202ZenPlinth
Fountain
Revised
March27, 2019
Assembleyourfountain onalevelsurface capableofholdingaminimumof138poundswith
anapproximate1.75 square foot footprint.
FT-134C (66lbs)
25”Lx10”Wx8.25”H
FT-202A(42lbs)
8.5”Lx13.25”Wx15”H
FT-134B (4lbs)
1.25”Lx6.25”Wx6.5”H
1. Position thebasin (FT-134C) where thefountain is to be
installed, ensuringthatitislevel.
2. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2"non-kink endofthe
tubingassemblyto thepumpoutlet.
b. Place thestopper aroundthepumpcordabout6”from
thepump.
3. Feedthepumpcordthrough theholeandout ofthechannelin
thebottomofthebasin(FT-134C).
4. FIRMLY pressthestopper intotheholeevenly.
a. Note: Usingthehandleofascrewdriverorhammer
worksbest.
5. Holdingthewaterfeatureover thebasin, inserttheCPVCend
ofthetubingassembly intothebottomofthewaterfeature
(FT-202A).
6. Place thewater featureontothebackedgeofthebasin
ensuring thatitislevel.
7. Place thepumpcover(FT-134B) in front ofthepump
assemblyand pushbackuntilproperlyseated.
8. Fillthefountainwithwater.