Canon BJC-3000 Series User manual

Quick Start
Guide
IMPORTANT
Follow the steps in this Quick
Start Guide to unpack and
set up your new BJC-3000 Series
Color Bubble Jet Printer.
Color Bubble Jet™Printer
BJC-3000
Series

Quick Start
Guide
IMPORTANT
Followthe steps in this Quick
StartGuide to unpack and
setup your new BJC-3000 Series
ColorBubble Jet Printer.
ColorBubble Jet™Printer
BJC-3000
Series
Remove all shipping tape and materials
from the unit.
Open the front cover and remove the
protective material and fixing tape
from the BJ cartridge holder.
Note that tape may not be in the exact
locations shown here.
Extend the paper support, and attach
the paper output tray to the front of
the printer.
3
You will need to purchase a parallel
cable for Windows 95/98/2000 or
Windows NT®(must be IEEE
1284-compliant), or a USB cable for
Windows 98/2000 or Mac®OS.
(Some models in the BJC-3000 Series
may come with a USB cable.)
Unpack the Printer
1
Remove all items from the box.
1 2
BJC-3000 Series
Color Bubble Jet®Printer
BC-33 Color BJ®Cartridge
Ink Tanks
BCI-3C Cyan BCI-3M Magenta
BCI-3BK Black BCI-3Y Yellow
Ink Cartridge
Storage Box—
For use when you purchase
additional BJ cartridges
Documentation Kit
Power Cord
Paper Output Tray
The Canon Creative CD-ROM includes:
Microsoft®Windows®printer driver
Macintosh®printer driver
IS-32 Color Scanner Cartridge driver
Online User's Manual
Software applications
Electronic registration
Tape
Spacer
BJ Cartridge
Holder
Paper Output Tray
Paper Support

Parallel Cable Users
Connect the cable to the computer and
then to the printer.
Connect the Printer
to the Computer
2
Make sure your computer is turned off.
Plug in the Printer
3
Load Paper
4
USB Cable Users
Connect the cable to the computer,
then to the printer.
Parallel Interface
Cable—
IEEE 1284
compliant
USB Cable
USB Cable
PC Connection
Connect the cable to the computer,
then to the printer.
Macintosh Connection
Wire Clips
Screws
Connect the power cord to
the back of the printer.
POWER
Button
POWER
Light
RESUME Button
Press to resume printing after clearing a paper jam.
POWER
Button
Connect the
other end of
the power cord
to a power outlet.
2
1
Press the
POWER button
to turn the
printer on.
3
The POWER light
starts flashing.
Important! The socket-outlet shall be
installed near the equipment and shall be
easily accessible.
Load a stack
of paper
in the
sheet
feeder.
USB Port
USB Port

5
1
2
3
4
5
6
7
Insert the Four
Ink Tanks
Install the Canon
BJ®Cartridge
1
6
2
3
4
5
6
Lift the
front cover.
The cartridge
holder moves
to the left.
Raise the blue cartridge lock lever
on the
cartridge
holder.
Remove the cartridge
from its package.
Remove these
protective materials:
Orange cap
Orange tape
Set the
cartridge into
the cartridge
holder.
Lower the
blue cartridge
lock lever until
it locks into
place.
Press in on the
tabs to remove
the caps.
Front Cover
Cartridge Holder
Cap
Tape
Do Not Touch
these areas
Serial
Number
Lock Lever
Remove the two orange
protective
cartridge caps.
Twist off the orange
protective cap.
To prevent spills,
do not press
the side of
the ink tank.
Insert the
yellow ink
tank into the
right slot of
the cartridge.
Press down
on the top of
the ink tank
until it locks
into place.
Install the other 3 ink tanks
as shown.
Magenta (BCI-3M)
Cyan (BCI-3C)
Black (BCI-3BK)
Important!
Before you close the front cover, write down
the serial number (located inside the printer
to the right of the cartridge holder).
Close the front cover.
When the POWER light stops flashing,
the printer is ready.
Pick up the BCI-3Y (Yellow)
Ink Tank.
Pull up the
orange tape.
Remove the
plastic wrapper
from the tank.
Serial No. Date of Purchase

9. Follow the on-screen instructions.
Setup includes:
Printer driver installation
Product registration (see What's Next—Product
Registration)
Creative software installation
Windows 98—USB Cable Users
Installation Tips
If Setup does not start automatically,
click Start on the Windows taskbar
and then click Run.
Type X:\SETUP (where X:is your
CD-ROM drive). Then click OK.
Install the Printer Driver
7
1. Turn on the computer. The Add New
Hardware screen appears:
If you do not see one of these screens, eject the CD-ROM
and re-insert it. Then follow the instructions on the screen.
2. Insert the Canon Creative CD-ROM into your
CD-ROM drive and click Next. The next
screen asks what you want Windows to do:
6. Click Next. The next screen shows the successful
completion of this installation. USB is now enabled
on your computer.
7. To proceed on to the printer driver installation,
click Next.
8. Eject the CD-ROM and re-insert it. Setup starts
automatically.
3. Choose "Search for the best driver for your
device," and click Next. The next screen
asks you where to look for the driver:
4. As shown above, click the "CD-ROM drive"
check box; be sure to uncheck the other
options. Click Next.
5. Once the driver is found, this screen appears:
The printer driver controls communication between the printer and your computer. Use the Canon Creative CD-ROM
and follow these simple steps and the instructions on the screen.