Canon iP8500 - PIXMA Color Inkjet Printer Instruction Manual

Series
Photo Printer
Start Here
Easy Setup Instructions
1Unpack the Printer
Carefully remove all items from the box.
Power Cord
PIXMA iP8500 Series
Print Head
Documentation and
Software Kit
PhotoPrinter
Quick Start Guide
Series
PIXMA iP8500 Series
Photo Printer
1
2Prepare the Printer
Remove all shipping tape and clear plastic from
the printer. Write down the serial number
located inside the printer. You will need this to
register your products.
Plug the power cord into the back of the printer
and connect the other end to a power outlet.
Press the POWER button. The printer will
initialize.
Lower the front cover. Raise the top cover.
Lower the inner cover.
The print head holder automatically moves to
the center. Remove the protective tape.
4
3
2
1
3Install the Print Head
Remove the print head from its package.
Remove the orange protective cap from the
print head.
NOTE: Do not touch the print head nozzles and
the electrical contacts.
Raise the print head lock lever.
Slide the print head into the holder.
The print head will rest at a slight angle.
Lower the print head lock lever and press it
down until it clicks into place.
5
4
3
2
1
4Install the Ink Tanks
Peel back the orange tab and completely
remove the plastic wrapper from the Yellow Ink
Tank (BCI-6Y).
Twist off and discard the orange protective cap.
NOTE: To avoid spilling ink, never press on the
sides of an ink tank.
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head lock
lever.)
Press down until the ink tank clicks into place.
Insert the remaining seven ink tanks into their
assigned slots.
Close (a) the inner cover and then (b) the top
cover. Lift open the paper support and extend
the paper output tray.
IMPORTANT: Be sure to close the inner cover
completely, or the paper will not feed properly.
NOTE: The printer will perform a print head
cleaning. Wait until the POWER lamp displays a
steady green light before proceeding.
5
4
3
2
1
5Connect the Printer
and Load Paper
IMPORTANT: Be sure the printer is off before
continuing, or the computer will attempt to
install the printer driver before the printer is
ready.
TURN THE PRINTER OFF.
Connect one end of the USB cable to the
computer, the other to the appropriate USB
port on the printer.
If your computer and operating system support
USB 2.0 Hi-Speed, use the top port. Otherwise,
use the bottom port.
NOTE: The iP8500 Series Photo Printer is
equipped with both USB 2.0 Hi-Speed and USB
ports. If you do not know your USB version
number, connect using the lower port.
Do not switch port after installation.
Remove the shipping tape from the paper
guide. Pinch the paper guide and slide it to the
left. Load a few sheets of blank paper into the
auto sheet feeder, then slide the paper guide
toward the left edge of the paper.
IMPORTANT: Print Head Alignment (Step 6)
requires that 8.5" x 11" paper is loaded in the
Auto Sheet Feeder (top paper feeder).
3
2
1
click
Inner Cover
Top Cover
Front Cover
Protective Tape
Tear at notch to open
Print Head
Nozzles
Electrical
Contacts
Paper Output Tray
USB Cable
USB Cable
USB 2.0
Hi-Speed Port
USB Port
BCI-6BK Black
BCI-6PM Photo
Magenta
BCI-6Y Yellow
BCI-6M Magenta
BCI-6C Cyan
Protective cap
click
Auto Sheet
Feeder
Paper
Guide
Continue with Step 6
on side two.
(a) Inner Cover
Paper Support
(b) Top Cover
BCI-6G Green
BCI-6R Red
BCI-6PC Photo Cyan
POWER Button
POWER
Lamp
USB Port
Serial Number
Location
Ink Tanks
Ink Tanks
iP8500_ESI_US_V1.qxd 6/25/04 10:24 AM Page 1
All manuals and user guides at all-guides.com
all-guides.com

Part no. QA7-3316-V01 © 2004 Canon Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand.
Windows
Macintosh
7Cassette Loading
NOTE: Loading paper in the cassette provides
additional paper handling flexibility. For
additional information visit the electronic User's
Guide.
Push in the paper output tray and close the
front cover.
Pull out the cassette from the bottom of the
printer.
2
1
Remove the cover of the cassette.
NOTE: For letter-size (8.5" x 11") paper,
push the tab and extend the tray
3
Slide the long edge paper guide to the left and
the short edge paper guide toward you.
Load paper so that the top right corner touches
the inside corner of the cassette. Adjust paper
guides to the edges of paper.
5
4
Lower the front cover and extend the paper
output tray.
NOTE: When feeding paper from the cassette,
press the paper feed switch so that the cassette
lamp turns on.
8
Replace the cover of the cassette.
Insert cassette completely into the printer until
it clicks into place.
NOTE: For letter-size (8.5" x 11") paper, the
front edge of the cassette will extend
beyond the bottom of the printer.
7
6
Be sure to TURN THE PRINTER OFF before
continuing.
NOTE: For Windows®XP or Windows 2000, log
on to Windows as a member of the
Administrators group before continuing.
IMPORTANT: If you see the Found New
Hardware Wizard, click Cancel.
Close any open software applications including
anti-virus, computer security and other
software. Then insert the Setup Software &
User’s Guide CD-ROM. The setup program
should run automatically.
NOTE: If the setup program does not run, click
Start, then Run, then type D:\msetup.exe,
where Dis your CD-ROM drive.
When the main menu appears, click Easy
Install and follow on-screen instructions.
NOTE: Select Easy Install in order to install the
application software, electronic manual and
printer driver. Select Custom Install in order to
choose the options you would like to install.
3
2
1
When the "Printer Connection" window
appears, TURN THE PRINTER ON. The software
will begin identifying the printer port being
used.
IMPORTANT: If your computer cannot detect a
printer port, click Help and refer to the online
instructions.
Follow the on-screen instructions to install the
remaining software. When the "Installation
Results" window appears, click OK.
Follow the on-screen instructions to register
your product.
When the "Print Head Alignment" screen
appears, ensure that letter size paper is loaded
in the auto sheet feeder (top paper feeder).
Click Execute and follow on-screen
instructions.
NOTE: Print head alignment will take several
minutes to complete.
When the "Installation completed successfully"
screen appears, click Exit.
NOTE: When Restart is displayed, ensure the
Restart the system now (recommended) check
box is selected, then click Restart.
8
7
6
5
4
NOTE: For Mac OS 9.x printer driver
instructions, refer to the "Appendix"
of the Quick Start Guide.
Turn on your Mac and your printer and insert
the “Setup Software & User's Guide” CD-ROM.
NOTE: Log on as an Administrator before
continuing.
Double-click the CD-ROM icon, then the Mac
OS X folder, then the Printer Driver folder.
Double-click the PIXMA iP8500 300.pkg icon,
then follow the on-screen instructions.
NOTE: When the "Authenticate" screen appears,
enter your administrator name and password.
If you do not know your administrator name or
password, click , then follow the on-screen
instructions.
When the message "The software was
successfully installed" appears, click Restart.
When a message asking you to align the print
head appears, click OK.
5
4
3
2
1
Start the print head alignment procedure.
a. Double-click the Macintosh HD icon, then
Applications folder. Double-click the
Utilities folder, then the Printer Setup
Utility icon.
b. When the "Printer List"screen appears,
select iP8500, then click the Utility icon.
If the printer is not displayed on the Printer
List, you need to add it on the list.
For details, follow the instructions in Mac
Help.
c. Select iP8500 and click Maintenance.
d. Ensure that letter size paper is loaded in the
auto sheet feeder (top paper feeder).
e. Click the down-arrow to select Test Print.
Click the Print Head Alignment icon and
follow the on-screen instructions.
NOTE: Print head alignment will take
several minutes to complete.
6
Click Quit to exit the BJ Printer Utility. Print
head alignment is now complete.
Access your CD-ROM again. From the Application
folder on the CD-ROM, double-click on the software
to be installed.
Follow the on-screen instructions. When the
“Installation is completed” screen appears, click
OK.
Double-click on the Product Registration icon,
found in the Mac OS X folder, to register your
product.
10
9
8
7
6Windows®Printer Driver Installation and Print Head Alignment 6Macintosh®Printer Driver Installation and Print Head Alignment
Cover
Tab
Long Edge
Guide
Short Edge
Guide
Top Right
Corner
Cover
Auto
Sheet Feeder
Lamp
Cassette
Lamp
Paper Feed
Switch
click
Front Cover
Paper Output Tray
iP8500_ESI_US_V1.qxd 6/25/04 10:24 AM Page 2
All manuals and user guides at all-guides.com