Canon PIXMA MX392 User instructions

Setting Up Your MX392 In
Default Mode (Tel Priority Mode)
Without An Answering Machine
Next

Fax Easy Setup
NextPrevious
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Press the FAX button at any screen
to go to fax standby mode.
Step 2
Click Next to proceed
through the setup.

Connecting The Phone Lines
NextPrevious

(ExistingPhoneCord)
WallJack HandSet
(Phone)
Fax to Phone Line Connection
NextPrevious
4
Before
After
(ExistingPhoneCord)
WallJack
(PhoneCordincludedwith Canonprinter)
HandSet
(Phone)

Fax to Phone Line Connection
NextPrevious
5
•Plugtheprovidedphonecordintothewalljack
(ExistingPhoneCord)
HandSet
(Phone)
(PhoneCordincludedwith Canonprinter)
WallJack

Fax to Phone Line Connection
NextPrevious
6
•Plugtheprovidedphonecordintothe“LINE”jacklocatedonthe
rearofthemultifunction
(ExistingPhoneCord)
WallJack
(PhoneCordincludedwith Canonprinter)
HandSet
(Phone)

Fax to Phone Line Connection
NextPrevious
7
•Removethewhiteplugfromtheupperjacklabeled“EXT.”
(ExistingPhoneCord)
WallJack
(PhoneCordincludedwith Canonprinter)
HandSet
(Phone)

Fax to Phone Line Connection
NextPrevious
8
•Plugthesecondphonecordintothe“EXT.”jacklocatedontherear
ofthemultifunction
(ExistingPhoneCord)
WallJack
(PhoneCordincludedwith Canonprinter)
HandSet
(Phone)

Fax to Phone Line Connection
NextPrevious
9
•Plugthesecondphonecordintothephone
(ExistingPhoneCord)
WallJack
(PhoneCordincludedwith Canonprinter)
HandSet
(Phone)

Setting Up The Receive Mode
NextPrevious