Canon Creative Park Marine iguana User manual

Parts sheet: 10 pages
Number of parts: Iguana 30 parts, Rock 3 parts
Assembly Instructions: 7 pages
Notation Key
Mountain fold
Make a mountain fold.
Scissors line
Cut along the line.
Valley fold
Make a valley fold.
Assembly Instructions
1: Carefully cut out all the pieces.
2: Make mountain folds and valley folds along the dotted lines, as indicated.
3: Attach the pieces together in order of the numbers on the glue spots, and assemble the parts.
PAGE01
Marine iguana: Assembly Instructions
Marine iguana
Scientific name: Amblyrhynchus cristatus
The marine iguana is a large reptile distributed in the Galapagos Islands,
a part of Ecuador, South America. Its body reaches 120 to 150 cm in
length. It feeds mainly on seaweed, meaning it is suited to the ocean, a
trait which makes the marine iguana unique from other lizards. A marine
iguana will bask in the sun for a long time to raise its body temperature
enough, before entering the sea. Its laterally flattened tail is well-suited to
swimming, and it has glands near its nose to expel excess salt ingested
from the sea water. On its head are rough bumps, and on its neck and
back is a row of spine-like scales, known as a crest. All four of its legs
feature sharp claws, which have evolved to allow the marine iguana to
cling firmly to rocks in the ocean and feed on the marine plants, even in
the rapid currents found around the Galapagos Islands.
Scissors, set square, glue
(such as woodwork glue),
metal rod, spatula, a used
pen, toothpicks, tweezers
(useful for handling small
parts).
Before gluing, crease the
paper along mountain fold
and valley fold lines and make
sure rouned sections are nice
and stiff.
This craft requires the use
of glue, scissors, tweezers,
and other tools which may be
dangerous to young children.
Please keep them out of reach
of children while you work.
Tools and Materials Assembly Tip Caution
Trace along the folds with a used pen (no-ink) to get a sharp, easier fold.
Handy
Hints

A: Assemble the head and chest
Make the head
(1-17)
Attaching the throat
to the chin (31-38)
Curl neck 1 into a ring,
and attach it to the back
of the head (39-52)
Curl neck 2 into a ring,
and attach to neck 1
(53-66)
Align the spines on the
left and right and attach
Completed head
Make the chin (18, 19, 20),
and attach it to the head
(21-30)
A-1 Head
A-3 Throat
A-5 Neck 2
A-6 Chest
A-4 Neck 1
A-2 Chin
Align the spines on the
left and right and attach
Attach the chest
to neck 2 (67-70)
Before you begin: For the spines on the iguana's back, the assembly instructions direct you to cut away the unnecessary gray pieces at the end. This is the most
efficient method, but it can be difficult to cut the parts after they are glued, so beginner paper crafters should cut the gray parts in advance.
PAGE02
Marine iguana: Assembly Instructions

B: Assemble the front legs
Curve left leg 3 and attach
it to left leg 2 (101-107),
attach 108 and 109 and
make it into a ring
Curve right leg 1 and attach
it to the right foot (121-126),
making a cylinder shape
(127-132)
Attach right leg 2 to right
leg 1, rolling it as you
attach (133-142)
Curve right leg 3
and attach it to
right leg 2 (143-
149), attach 150
and 151 and
make it into a ring
Open up glue tabs 152,
154 and 160 by making
valley folds
Open up glue tabs 156,
158 and 159 by making
valley folds
Curve left leg 1 and attach it to
the left foot (82-87), making a
cylinder shape (88-92)
After attaching 93, attach left leg 2
to left leg 1 (94-99), attach that to
100 and make it into a ring
B-1 Left foot
B-2 Left leg 1
B-3 Left leg 2
B-4 Left leg 3
B-5 Right foot
B-6 Right leg 1
B-7 Right leg 2
B-8 Right leg 3
Make the toes (71-80),
glue 81 and make the
whole thing into a ring
Make the toes (110-119), glue 120
and make the whole thing into a ring
PAGE03
Marine iguana: Assembly Instructions

C: Connect the front legs and assemble the body
Attach both the front
legs to the chest
(152-158)
Attach the front legs and
chest to neck 2 (159-169),
align the left and right spines
and glue them together
Do not glue these
spines together
Do not glue these
spines together
Attach the body 1 to chest
(170-178)
Attach the body 2 to body 1
(179-186)
C-1 Body 1
C-2 Body 2
PAGE04
Marine iguana: Assembly Instructions

D: Assemble the back legs
Curve left leg 1 and attach it to
the left foot (199-207), making
a cylinder shape (208)
Attach the left leg 2
to left leg 1 (209-215)
Attach the right leg 1
to right foot (238-247)
Attach the right
leg 3 to right
leg 2 (257-263)
Attach the right
leg 4 to right
leg 3 (264-266)
Attach the left leg 3
to left leg 2 (216-222)
Attach the left leg 4
to left leg 3 (223-
225)
Attach right
leg 2 to right
leg 1 (248-
254), and
also attach
255 and 256
D-1 Left foot
D-6 Right foot
D-8 Right leg 2
D-9
Right leg 3
D-10
Right leg 4
D-7
Right leg 1
D-2 Left leg 1
D-3 Left leg 2
D-4 Left leg 3
D-5 Left leg 4
Make the toes (187-196),
glue 197 and 198 and make
the whole thing into a ring
Make the toes (187-196),
glue 197 and 198 and make
the whole thing into a ring
Make the toes (226-235), glue 236 and
237 and make the whole thing into a ring
PAGE05
Marine iguana: Assembly Instructions

E: Connect the back legs and assemble the tail
Attach the back legs to
body 2 (267-274)
Attach the tail 1 to tail 2
(275-278)
Attach the tail 3 to tail 2
(279-282)
Attach the tail 4 to tail 3
(283-286)
Glue together the left and right spines
of tail 1 through 3
E-2 Tail 2
E-3 Tail 3
E-4 Tail 4
E-1 Tail 1
Do not glue these
spines together
PAGE06
Marine iguana: Assembly Instructions

F: Finishing touches
Make the rock (1-10)
Complete!
Attach the tail 4 to
body 2 (287-290)
Glue all the left and right spines together
Using the tips of some scissors,
cut away the unnecessary pieces
around the spines
Attach the remaining
parts of tail 4 to the
back legs and body 2
(291-296)
F-1 Rock 1
F-2 Rock 2
F-3 Rock 3
PAGE07
Marine iguana: Assembly Instructions