Canon Creative Park Teddy Bear User manual

A1 Card
Scissors line
Mountain fold
Parts No. / Parts name
Assemble the card
Use pattern: Page2 / Page3.
Put glue on the area on the
surface shown in blue, and
attach the pieces together.
This should be the top
edge of the opened card.
The Assembly instructions are divided into three blocks: A (card),
B (curtain, heart, teddy bear), and C (rose, message).
Follow the instructions for each block to assemble your card.
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Notation Key
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Tools
Numbers of parts
to be attached
Scissors line
Mountain fold
Valley fold
Glue spot
Parts No.
Pop-up Card (Teddy Bear) : Assembly Instructions Page
Cut along the line marked .
Cut out A1 by cutting along the lines.
Make a mountain fold on A1.
Trace along the mountain fold line with a stencil pen,
scoring it to make it easier to fold.
Attach A1 and A2 and the card is complete.
Using the photo as a guide, attach in the direction of the arrow.

Choose your preferred message for C3, and attach it to the card.
Here, we are using "Happy Valentine"
as an example.
Align these parts.
Align with the shape of these parts.
Lastly, open and close
the card to check its
movement.
Pop-up Card (Teddy Bear) : Assembly Instructions Page
Assemble the curtain, hearts and teddy bears
Use pattern: Page4 / Page5.
Attach B1, B2 and B3 together, and attach them to the card.
After attaching the parts, close and open to check if the card opens smoothly.
Attach B4 and B5 to the card, and then attach B6 and B7 to them.
Attach B8 to the card, and then attach B9 and B10 to it.
Attach B11 and B12 to the card, and then attach B13 and B14
to them. The curtain, hearts and teddy bears are complete.
Assemble the roses and message
Use pattern: Page6.
Attach C1 and C2 to the card.
Attach C4 and C5 to the card. Next, write your message on C6
and attach it to B8, and you're done!