Canon PAPER CRAFT Pop-up Card Teacup User manual

Part A Part D
Part B
Base
Front cover Back cover
Support
Spoon
Stickers
Part C
Cut out the parts and crease them along the fold lines indicated.
Pop-up Card (Teacup) : Assembly Instructions Canon is a registered trademark of Canon Inc.
Caution:Glue, scissors, and other tools may be dangerous to young
children so be sure to keep them out of the reach of young children.
Valley fold
(dashed and dotted line)
*Make a valley fold.
Scissors line(solid line)
*Cut along the line.
Cut in line(solid line)
*Make a cut.
Black triangle
Glue here
Mountain fold(dotted line)
*Make a mountain fold.
Assembly Instructions
scissors, paste, a used ballpoint pen (tracing along the fold lines
makes them easier to fold)
You will needYou will need
White triangle
Glue the back
1

Flip part A over, fold over the upper glue spots and then stick down on
the instead.
Glue the ends of part B and stick them together. Curl part A.
(Use a pen or other tubular object to make the curl as shown.)
Glue the ends of part A and stick them together.
Fold over the support edges and glue into place.
Pop-up Card (Teacup) : Assembly Instructions Canon is a registered trademark of Canon Inc.
2

Insert the support assembly 6 into assembly 7 then stick on assembly 7
at the glue spots, along the fold line on the opposite of the support.
Fold the support along the fold line and glue together on the inside.
Fold part C along the center line and glue together on the inside.
Stick assemblies 8 and 9 together.
Pop-up Card (Teacup) : Assembly Instructions Canon is a registered trademark of Canon Inc.
3

Stick part D and assembly 10 together at their glue spots.
Pop-up Card (Teacup) : Assembly Instructions Canon is a registered trademark of Canon Inc.
Glue assembly 2 to the base paper, once on each side.
Glue assembly 11 to assembly 12, starting from the back.
If you like, add the spoon and stickers.
Stick on a colored paper cover onto half of the rear side of the base paper.
Be careful to stick in on in the right direction.
Assembly 15 is the completed card when the cover is stuck
on to the other half side.
4