Canon Paper Craft Emperor Penguin User manual

1
Emperor Penguin
Classification: Bird, Penguin Class, Penguin Family
Height: approximately 100 to 130 cm
Weight: approximately 30 kg
Habitat: Antarctica, near ice floes in the Antarctic ocean
Population: approximately 200,000 pairs (breeding pairs)
The Emperor Penguin is the largest penguin in the world. Emperor Penguins grow to be
approximately 100 to 130 cm tall, and weigh about 30 kg. Emperor Penguins are good
at diving, and are said to be able to reach depths greater than 250 m. They can stay
submerged for around 20 minutes, longer than any other kind of penguin.
To avoid losing body heat and strength while living on the ice, penguins keep their
bodies rounded, pulling in their feet and necks. Penguins walk slowly and awkwardly,
but in the water they seem to fly, swimming with the greatest of ease.
Penguins form large colonies for breeding on the thick ice layers surrounding Antarctica.
Females lay one egg in early May, then leave the egg in the care of the male. The
females head for the ocean to search for food to replenish the energy expended in laying
the eggs, and for the chicks which will soon hatch. The male carries the egg on top of its
feet to keep it from touching the cold ice, and covers the egg with the skin of its belly.
The male remains standing like this for about two months, protecting the egg without
taking a break even to eat or drink. The female returns to feed the chick by the time the
egg hatches. The parents protect the chick from the cold by carrying it on their feet.
Instructions
Caution
Tools
Scissors, glue (we recommend craft glue).
Keep glue away from small children.
Be careful not to cut your fingers when using scissors.
1) Carefully cut out the parts.
2) Make mountain folds and valley along the dotted lines, as indicated
by the directions.
3) Assemble the parts in the order shown by numbers on the glue tabs.
(Read the Explanation of Symbols for more information.)
4) Attach all the parts together in order.
(Read the Explanation of Symbols for more information.)
5) Your Papercraft model is finished!
Explanation of Symbols
Mountain fold Valley fold
Cut line
These tabs are to be glued to the (other) part which name is indicated on the tab.
Numbered glue tabs
Glue tabs with symbols and part names
Glue tabs with numbers on a white background
Assemble the parts by gluing together in the order indicated by the numbers.
Arrows ( )
Do not glue these areas. Insert the part into its mating part,
in the direction indicated by the arrow.
After gluing all other tabs to the other parts,
glue these tabs in the order indicated by the numbers.
name
http://bj.canon.co.jp/english/3D-papercraft/
Papercraft Mini-book / Assembly InstructionsEmperor Penguin : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

2
Assemble the HEAD and BEAK
1HEAD 2BEAK
3Glue the BEAK to the HEAD
HEAD
HEAD BEAK
BEAK
HEAD, BEAKEmperor Penguin : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

3
4
6
5
BELLY
4
6Glue the RIGHT FOOT and LEFT FOOT to the BELLY
5FEET
Glue and .
Do not glue and .
BELLY
Assemble the LEFT FOOT
in the same manner.
RIGHT FOOT
RIGHT FOOT LEFT FOOT
Assemble the BELLY and FEET
BELLY
BELLY, FEETEmperor Penguin : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

4
LEFT WING
RIGHT WING
RIGHT WING
BACK
TAIL
Assemble the BACK, TAIL, and WINGS
7BACK 8TAIL
9WINGS
10 Glue the TAIL and WINGS to the BACK
BACK
TAIL
Fold in two and glue together, then cut out.
Assemble the LEFT WING
in the same manner.
Glue to .
Do not glue and .
BACK, TAIL, WINGSEmperor Penguin : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

5
Put it all together (1)
11 Glue the BELLY and BACK together
Glue together in the order indicated by the numbers,
starting from the bottom.
Glue the bottom surfaces together.
Place your hand inside to keep the shape correct
as you are gluing the parts together.
BACK
BELLY
11
22
33
44
55
66
Glue to .
Final assemblyEmperor Penguin : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

6
Completed model
Put it all together (2) / Completed model
12 Final assembly
HEAD
Glue here first.
1
2
Final assembly / Completed modelEmperor Penguin : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.