Canon Tyrannosaurus rex User manual

1
Assembly Instructions
Caution
Tools
Scissors, glue (we recommend craft glue.)
Keep glue away from small children.
Be careful not to cut your fingers when using scissors.
Fold the folding lines before gluing.
1) Carefully cut out the parts.
2) Make mountain folds and valley folds along the dotted lines,as
indicated by the directions.
3) Assemble the parts in the order shown by the numbers on the glue
tabs. (Read the Explanation of Symbols for more information.)
4) Attach the parts in order.
(Read the Explanation of Symbols for more information.)
5) Your Paper craft model is finished!
Explanation of Symbols
Mountain fold Valley fold
Cut line
These tabs are to be glued onto the matching parts,
which name is indicated on the tab.
Numbered glue tabs
Glue tabs with symbols and part names
Glue the parts together in the order indicated by
the numbers.
Arrows ( )
Do not glue these areas. Insert the part into its mating part,
in the direction indicated by the arrow.
name
Tyrannosaurus rex : Assembly Instructions Paper craft Mini-book /Assembly Instructions
Canon ® is a registered trademark of Canon Inc.
http://www.canon.com/c-park/en/
Tyrannosaurus rex
Classification: Saurischia Theropoda
Size: Length approx.12m Weight approx.5t
Period: Cretaceous

Tyrannosaurus Rex, whose name means 'tyrant lizard king', is
classified as a bipedal carnivore (Theropoda) of the lizard-hipped
dinosaur order (Saurischia).
It had a large, sturdy head and long hind legs and a tail. In
comparison, its arms were very short with two-fingered hands.
What their actual purpose was is unclear. It is believed that T-Rex
was able to balance skillfully and moved around on its two hind
legs.
Dinosaurs lived about 225 million years ago, in the Mesozoic era,
which is made up of the Triassic, Jurassic and Cretaceous periods.
It is thought likely that the dinosaurs were wiped out around 65
million years ago, when many plants and animals died as a result
of climatic changes brought about by a meteor striking the earth,
but no one knows what really happened.

2
Assemble the HEAD, MUZZLE, and NECK
HEAD NECK
MUZZLE
MUZZLE
NECK
Glue the HEAD to the MUZZLE Glue the HEAD to the NECK
HEAD
HEAD
HEAD
HEAD
NECK
123
45
MUZZLE
Tyrannosaurus rex : Assembly Instructions HEAD/MUZZLE/NECK
Canon ® is a registered trademark of Canon Inc.

Assemble the BODY, TAIL, LEGS and FEET
BODY
BODY
LEGS
Glue the LEGS and FEET
FEET
FEET
Glue the RIGHT FOOT and LEFT FOOT
TAIL
TAIL
Assemble the RIGHT FOOT in the same manner.
Glue the LEFT FOOT in the same manner.
* The right and left FEET are the same.
FEET
RIGHT FOOT
RIGHT FOOT
LEFT FOOT
LEFT FOOT
67
89
10 11
3
BODY/TAIL/LEGS/FEET
Tyrannosaurus rex : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

4
FIGURE Complete
Put it all together
BODY
Final Assembly
12
TAIL
Insert without gluing.
Final Assembly
Tyrannosaurus rex : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.

Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurusrex
Tyrannosaurusrex
Tyrannosaurusrex
Tyrannosaurusrex
Tyrannosaurusrex
Tyrannosaurusrex
Tyrannosaurus rex Tyrannosaurus rex Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
Tyrannosaurus rex
5
Completed model
Assemble the STAND
STAND2
STAND2
Mount the figure on the STAND
STAND assembly
Mount the figure on the footprints, so that the back of the feet slide into position.
STAND2
STAND3 STAND3
STAND1
STAND
13 14
15
FIGURE
STAND
Tyrannosaurus rex : Assembly Instructions
Canon ® is a registered trademark of Canon Inc.