Canvas 168-0110-0 User manual

PELHAM SWIVEL STOOL
PRODUCT NO. 168-0110-0
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS™ collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS™ makes it easy to refresh your space
to reflect your unique style and the way you
live every day.
We would love to hear from you and welcome your
thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVAS™ products
to life. We can’t wait to see!

PARTS LIST 4
EXPLODED PARTS 5
HARDWARE LIST 6
BEFORE YOU BEGIN ASSEMBLY 7
STEP-BY-STEP GUIDE 8
TECHNICAL DATA 11
TROUBLESHOOTING 12
WARRANTY INFORMATION 13
1 Person
No. 2 Cross-head Screwdriver
Tip Shown Actual Size

Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
Any assembly or maintenance of the product must be carried out by adults
only.
Some parts may contain sharp edges. Wear protective gloves if necessary.
To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
Due to the nature of steel, surface oxidation (rusting) will occur if the
protective coating is scratched. This is a natural process. To minimize the
condition, it is recommended that care be taken when assembling and
handling the product in order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
TABLE OF CONTENTS
NOTE: Donot overdrill/
Beawareof over-drilling.
TOOLS REQUIRED

ITEM
DESCRIPTION
THUMBNAIL
QUANTITY
1
Seat Surface
1
2
Leg Frame
2
3
Support Rail
2
PELHAM SWIVEL STOOL
PARTS LIST

LIST IST
PELHAM SWIVEL STOOL
EXPLODED PARTS
5
1
2X
3
2X
2

PELHAM SWIVEL STOOL
ITEM
DESCRIPTION
THUMBNAIL
QUANTITY
A
Bolt
8
B
Spring washer
8
C
Washer
8
D
Screw
4
E
Hex key
1
HARDWARE LIST
6

MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and make sure
you have all tools required for assembly.
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.
REMOVE PACKAGING MATERIALS
Place packaging materials back in the box. Do not dispose of
packaging materials until assembly is complete.
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS™ customer service at 1-888-660-6684 (toll-free).
PELHAM SWIVEL STOOL
7
BEFORE YOU BEGIN ASSEMBLY

STEP 1
Place Seat (A) upside down onto a soft surface that will not damage finish.
Put seat surface 1(top towards the ground) on a clean and flat surface/floor, then attach
leg frame 2to seat surface 1using bolt A, spring washer Band washer C, aligning the
holes. Repeat for other leg frame.
When assembled, tighten all the bolts with the hex key E.
3
B
PELHAM SWIVEL STOOL
STEP-BY-STEP GUIDE
8
1
X1
X1
X4
B
X4
X4
2
A
C
E
X1
1
2
A
B
C

STEP 2
Attach support bar 3to leg frame by inserting tenon into mortise and aligning the holes.
Repeat for other support bar.
When assembled, tighten all the bolts with the hex key E.
PELHAM SWIVEL STOOL
STEP-BY-STEP GUIDE
9
2
X1
3
X2
A
X4
B
X4
C
X4
E
X1
2
3
A
B
C

STEP 3
Affix support bars 3to leg frame using screw Band cross-head screwdriver (not
included); do not tighten the screw too tightly and do not use an electric tool.
2
PELHAM SWIVEL STOOL
STEP-BY-STEP GUIDE
D
X4
10
D
3
2