Canvas MORAINE 088-0543-0 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
MORAINE ARMCHAIR
PRODUCT NO. 088-0543-0

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS® collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS® makes it easy to refresh your space
your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #mycanvasstyle.
Show us how you bring CANVAS® products
to life. We can’t wait to see!

Tools Required 3
Parts List 4
Step-by-step Guide 6
Caring for Your Item 11
Warranty 11
TABLE OF CONTENTS
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• The maximum weight capacity for the chair is 225 lb (102 kg).
Do not stand on the chair.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
• Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
TOOLS REQUIRED
Hex Key (included) Wrench (included) 2 people
Before beginning assembly of this product, be sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part appears to be missing or damaged,
do not begin assembly of this product and call customer service immediately.
3
MORAINE ARMCHAIR

PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Chair back 1
2Chair seat panel 1
3Right arm 1
4Left arm 1
5Seat cushion 1
6Back cushion 1
7Plastic foot 4
MORAINE ARMCHAIR4

EXPLODED PARTS
1
2
3
4
5
7
77
7
6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
A
B
Screw M6*18 6
C
Screw M6*40 2
Screw M6*45 2
5
D
E
Washer M6 10
Hex key 1
F
G
Nut 4
Spring washer 4
H
I
Washer M8 4
Wrench 1
MORAINE ARMCHAIR

STEP-BY-STEP GUIDE
4x1 3x1
STEP 1
Place the right arm 3onto a non-abrasive surface,
such as a carpet, with its inside facing upwards Attach
two plastic feet 7to the bottom of the right arm 3with
nuts F, spring washers G and washers Husing wrench I,
aligning the holes. When assembled, tighten all screws
with wrench I. Repeat steps to assemble the remaining
two plastic feet 7to the left arm 4.
Fx4
Hx4
7x4
Gx4
3
4
77
77
6
F
G
H
Ix1
MORAINE ARMCHAIR

STEP 2
Place the chair back 1onto a non-abrasive surface,
such as a carpet. Attach the chair seat panel 2to the
chair back 1with screws C and washers Dusing hex
key E, aligning the holes. When assembled, tighten
the screws with hex key E.
7
2
1
2x1 1x1
Dx2
Ex1
Cx2
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly is
complete, then fully tighten
each screw.
D
C
MORAINE ARMCHAIR

2
STEP-BY-STEP GUIDE
Bx1
Ax3
STEP 3
Place right arm 3onto a non-abrasive surface, such
as a carpet. Attach right arm 3to chair back 1and
chair seat panel 2with screws A, butterfly bolt B and
washers Dusing hex key E, aligning the holes. When
assembled, tighten all screws with hex key E.Ex1
Dx4
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly is
complete, then fully tighten
each screw.
8
3
1
D
B
D
A
MORAINE ARMCHAIR

STEP 4
Place left arm 4onto a non-abrasive surface,
such as a carpet. Attach left arm 4to chair
back 1and chair seat panel 2with screws A,
butterfly bolt Band washers Dusing hex key E,
aligning the holes. When assembled, tighten all
screws with hex key E.
9
3
2
4
1
D
B
D
A
Bx1
Ax3
Ex1 Dx4
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly is
complete, then fully tighten
each screw.
MORAINE ARMCHAIR

STEP-BY-STEP GUIDE
STEP 5
Put the seat cushion 5and back cushion 6on the seat.
6
5
10
6x1 5x1
MORAINE ARMCHAIR