Canvas WELLINGTON 063-6340-4 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
WELLINGTON 24” (61 CM)
WEATHERED-OAK BATHROOM
VANITY
PRODUCT NO. 063-6340-4

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS® collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS® makes it easy to refresh your space
to reflect your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVAS® products
to life. We can’t wait to see!

Parts List 4
Before You Begin Assembly 9
Step-by-step Guide 11
Technical Data 22
Troubleshooting 23
Caring for Your Item 23
Warranty 24
TABLE OF CONTENTS
TOOLS REQUIRED
No. 2 Cross-head Screwdriver
Tip Shown Actual Size
NOTE: Do not over-drill/
be aware of over-drilling
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
• Do not allow your children to climb or jump on furniture due to possible
accident, injury or death. A child climbing on a piece of furniture can make it
top-heavy and cause the furniture to tip over.
• Keep children and pets away during assembly.
• Repairing and replacing parts should be done by a qualified technician.
• This unit is intended for use only within the maximum weight indicated. Use
with loads heavier than the maximum weight indicated may result in instability
causing possible injury.
• Failure to follow these warnings could result in serious injury.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
2 People

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
7Lower Back Stretcher 1
8Middle Panel 1
9Back Panel 1
10 Upper Front Stretcher 1
11 Bottom Front Stretcher 1
12 Door 1
13 Drawer Front 1
1Backsplash 1
2Vanity Top 1
3Side Panel Left 1
4Side Panel Right 1
5Upper Back Stretcher 1
6Middle Back Stretcher 1

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY 5
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
16 Drawer Right 1
18 Drawer Bottom 1
17 Drawer Stretcher 1
14 Drawer Back 1
15 Drawer Left 1

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY6
EXPLODED PARTS
3
4
1
2
10
5
6
8
13
14
9
11
7
15
12
16
17
18

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY 7
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
ALarge Cam Lock 22
BLarge Cam Bolt 22
GM3.5x15 mm Screw 10
HM3.5x10 mm Screw 12
CM8x30 mm Wood Dowel 20
DHandle with Bolt 2
EM4x25 mm Screw 6
FM4x12 mm Screw 12
ISlow Close Hinge 2
JDrawer Slides 2
KLeveller 4

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY8
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
LSmall Cam Lock 6
MSmall Cam Bolt 6
NGlue 1

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY 9
BEFORE YOU BEGIN ASSEMBLY
MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and
make sure you have all tools required for assembly.
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS®customer service at 1-888-670-6684 (toll free).
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.

WELLINGTON 24” (61 CM) WEATHERED-OAK BATHROOM VANITY10
BEFORE YOU BEGIN ASSEMBLY
CAM LOCK SYSTEM OPERATION
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN
BE WIPED OFF WITH DAMP CLOTH.
Insert dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.
GLUE
X
X
1 4
3
2
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw cam bolt into the pre-drilled small holes on panel. Align the panels to be joined
so that the cam bolt goes into the pre-drilled hole on the edge of the second panel and
protrudes into the hole that will house the cam lock.
2. Insert the cam lock into pre-drilled large hole on panel. Make sure arrow on the cam
lock is pointed toward the cam bolt.
3. Once the cam bolt is connected inside cam lock, take a cross-head screwdriver and
tighten the cam lock by turning clockwise.
You are now ready to assemble the product.