Canyon Wildberry SW-74 User manual

Smartwatch Wildberry SW-74
Stylish metal body
Quick Guide v 2.0

1. SMARTWATCH. STYLISH METAL BODY
• Full touchscreen
• Durable metal watch-case
• Function button
• Compatibility with iOS and Android OS
• Multi-sport mode
• Weather display
• IP67 waterproof
• Remote camera control
• Music control
2. COMPLETE SET INCLUDES:
• Smartwatch • USB charging cable
• 1 strap • User manual
• Battery (built-in)
3. HOW TO USE
Make sure that your smartwatch is fully charged
before using. It takes up to 2 hours to become fully
charged.
Charging: Use the charger to attract the metal
contacts on the back of the watch (as shown
on the picture), and connect the other end of the
EN

charger to a USB charging head or computer USB
interface (please use 5V / 1 A charging head). The
charging progress will be indicated on the screen.
Do not use a fast charging device as it could result
in a short circuit and risk of re. For better charging
compatibility, it is advisable to use a Power Bank or
wall charger produced by Canyon.
Charger requirements: 5V/1A
Charging time: up to 2
hours depending on the
source of charge.
Turning on: Press and
hold the button for 3-5
seconds until the device is
turned on.
Connecting to a smartphone: charge the smartwatch,
turn it on, activate Bluetooth on your smartphone,
download and install the Canyon Smart Watch
application Canyon Life by scanning the QR code
below. Open Canyon Life app->“Bluetooth Devices”
->”Start”-> choose your watch from the devices list
(SW74) -> press ”ADD DEVICE” and you will see
Device successfully connected. Use the application
to activate the settings you need, for example you
can: turn on sedentary reminder, select apps that you
want to receive notications from, etc.
EN

2. Notications reminder
On the main screen, slide the screen
display up to open main menu, press
Message to show latest messages. When
got a new message (from application
selected in Canyon Life notications list), the
watch will vibrate to notify the user and display the
message content (beginning). The watch stores the
last three messages received from the mobile phone,
and automatically overwrites the rst stored message
1. Pedometer
The watch can record the number of
steps taken every day. The Pedometer
data can be synchronized to the App. The
number of steps, calories burned and
other information can be viewed from the App (the
number of steps, distance, calories, etc, are recorded
and saved in the watch at the end of the day).
EN
Scan this QR code to
download and install the
application Сanyon Life:
4. FEATURES

3. Sleep Monitoring
Users, who wear the watch when sleep
can record their sleep duration, as well
as their deep sleep and light sleep state
and then may adjust their sleeping time
according to the resulting data shown, improving the
body’s health index. The default sleep monitoring
time is from 8 pm to 10 am, the sleeping data result
of the previous night will be displayed after 10 am,
data can be synchronized to the App, the detailed
sleep data information analysis and data record can
be viewed from the App.
EN
4. Health
Heart Rate
Slide the watch display screen left
to show the heart rate function
interface. Stay on the screen to start
measurement. The result will be displayed when
the measurement is completed. The heart rate
monitoring data can be synchronized to the App,
and the detailed Heart Rate information analysis and
data record can be viewed from the App. Please,
utilize the correct posture when measuring. The
when the next message is received.
If you will use woman calendar, set up your data in
APP to get notication from the calendar.

6. Weather forecast
Displays current weather information and tomorrow’s
weather information. Note: watch needs to be
measurement results are for reference only, and
cannot be used as medical data.
Oxygen
Slide the watch display screen up to the
open main menu, select Health and then
choose SPO2 to show the blood oxygen
function interface. Stay on screen to
start measurement. The result will be displayed when
the measurement is completed. Please, utilize the
correct posture when measuring. The measurement
results are for reference only and cannot be used as
medical data.
EN
5. Multi-Sport mode
Slide the watch display screen up to
open the main menu, select Training
to enter the multi-sport mode. Modes
available: walking, running, cycling,
skipping, badminton, basketball, and football. Slide
up and down to select sport mode, press icon to start
exercise and press icons to pause / stop. The sport
mode data can be synchronized to the App. The
detailed sport mode recorded information, analysis
and data records can be viewed from the App.

11. Flashlight
Press to turn on and press again to
turn off.
9. Shutter (camera control)
Open “Take photo” screen in App and
you will see capture icon on watch. Press
icon on watch or shake the arm to make
a photo.
8. Brightness
Click the brightness adjustment function
to adjust the screen brightness you need
according to your requirements
7.Music control
With the app connected click Player icon
in the menu interface to enter the music
control interface. Tap to play/pause,
select next or previous song. Music
player have to be opened on the phone before using
remote.
EN
connected to the App to obtain the weather
information.
10. Timer
Click the S-WATCH function to enter the timer
interface, click the button to pause/start, and click the
round arrow button to reset.

For additional functions swipe
down on the main screen:
1. Vibration can be switched on/off
2. Lock the screen: press to lock
the screen, and briey click the
function button to unlock.
3. Shortcut for torch
4. Shortcut for weather
5. Shortcut for brightness
6. Other functions:
- The watch-face selection function.
- Restart
- Reset and power off
Click “Reset” icon to return all settings to
default. Click “Power Off” icon to switch
EN
5. ADDITIONAL FUNCTIONS

EN
off your watch. You need to press and
hold the button for more than 5 seconds
to switch it on again.
- About
Click here to view the version’s
information, BT MAC address, battery
level and Bluetooth connection
status.
2. Alarm
You should setup and activate this function in APP.
Up to 3 alarms can be set.
This product is not a medical device, its data
accuracy may vary. Please do not use metrics
it provides in any medical examinations.
6. EXTERNAL FUNCTIONS
1. Sedentary reminder
This function will remind the user to walk around (if
switched on in the app).

EN
TROUBLESHOOTING
Problem Solution
Your smartwatch doesn’t
turn on
Connect to a USB cable
to charge device and
wait for a few minutes
Your smartwatch isn’t
detected by a
smartphone
Make sure that
Bluetooth, GPS Location
Services with high
precision are active on
your smartphone
Your smartwatch is
detected by a
smartphone, but fails to
connect
Turn the smartwatch off
and then turn it back on.
SAFETY INSTRUCTIONS
Read and follow all instructions before
usage of this device.
1. Protect the device from excessive amount of
water: this smartwatch is protected only from small
If the actions from above-mentioned list do not help,
please contact support service at Canyon web-site:
http://canyon.eu/ask-your-question/
Download extended functional guide by the link:
https://canyon.eu/les/manuals/quickquides/
smartwatches/functional-guide.pdf