CareCo WA01057 User guide

www.careco.co.uk
Tandem Duo
Rollator
OWNERS HANDBOOK
Product Code: WA01057

Your Tandem Duo Rollator
1. Backrest
2. Rollator bag
3. Folding footrest
4. Front castor
5. Support frame
6. Rollator seat
7. Handbrake
List of Parts
1
7
6
5
2
3
4

Thank you for purchasing the Tandem Duo
rollator. The Tandem Duo rollator has been
designed and manufactured to meet our own
high level of specifications and we hope you
will be delighted with your purchase.
The Tandem Duo has been designed as a
lightweight and portable rollator to aid the user
to walk and offer stability and security to the
user. The Tandem Duo is designed for use both
indoors and outdoors and will take a maximum
user weight of 158kg (24 stone).
Rollator Dimensions: 96cm (Length) x 62cm
(Width) x 86-98cm (Height)
Weight: 10kg
Max User Weight: 158kg
Introduction
Specification
Opening and Folding
To open your rollator push down on either side
of the support bars as shown below. You should
feel both sides ‘click’ into position. To fold the
rollator gently pull the strap in the middle of
the seat.

Fold out the rear leg and secure the legs in
place with the handknobs. Always take care to
ensure that the handknob locates through the
hole in the leg and into the nut on the frame.
The shopping bag can be fitted to the front of
the rollator and can hold small-sized important
objects and documents. Simply attach the
basket securely to the support frame.
Insert rear wheels into frame by depressing the
spring button and sliding it into the hole.
Wheel Assembly
Shopping Bag
Check the
tightness of
the knobs
before use.

The rollator’s handles
can be adjusted in
height to suit
different users.
Simply turn the star
screw and set to the
desired height.
Repeat for the
opposite side and
make sure that both
handles are secure
and set at the same
height before use.
Handle Adjustment
Brake Operation
1. To operate the brakes squeeze the lever up
to engage the brake.
2. To lock the brakes, push down on the brake
lever until it locks in place.
3. To unlock the brakes, pull up on the brake
lever until the lock is removed.

Rotate the backrest of the rollator as shown in
photograph and install the legrests as shown
below for maximum comfort.
Rollator to Wheelchair
Installing the legrests
The legrests can swing in / out and are
removable for convenience. Pull up on the
black plastic handle to unlock the legrest and
then swing the legrest in or out, as required.
To remove the legrest, swing the legrest out
approximately 45º and pull up on the leg rest.
To reinstall the legrest, insert the leg rest at 45º
then swing the legrest inwards until it locks in
position.

Your CareCo branded product is under
warranty to be free from defects in material
and workmanship for one year from date of
receipt. This warranty expresses our confidence
in the workmanship and materials used for our
products.
In the event of a defect covered by this
warranty, CareCo will, at our discretion,
replace the rollator or supply parts to remedy.
This warranty does not cover device failure
due to owner misuse or negligence, or due to
normal wear and tear. The warranty does not
extend to non-durable parts, such as rubber
accessories, castors and grips, which are subject
to normal wear and tear and require periodic
replacement.
If you have any queries please contact CareCo.
The manufacturer reserves the right to alter
without notice any weights, measurements or
other technical data shown in this manual. All
figures, measurements and capacities shown
in this manual are approximate and do not
constitute specifications.
Warranty
CareCo, Hubert Road, Brentwood,
Essex CM14 4JE
www.careco.co.uk