CB2 Brace User manual

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Vietnam - r02 Page 1 of 2
brace DINING TABLE
Thank you for purchasing the Brace dining table. This
page lists all the contents included in the box. Please take
the time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
1
Fit 1 leg into end of crossbar as shown. Align
holes in crossbar with holes in legs and attach with
4 bolts. Secure each bolt with the allen wrench.
Repeat for remaining 3 legs.
components
hardware
tools required
16 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
4 - legs
1 - glass top
1 - crossbar
allen wrench (included)

2
With assistance from another adult, position base assembly upright. Carefully place glass top onto base, making
sure glass is securely supported by the plastic bumpers.
Adjust levelers as necessary to compensate for uneven floors.
Assembly is now complete.
brace DINING TABLE
Made in Vietnam - r02 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
It is recommended to use coasters to protect surface from heat.