
Made in Vietnam - r01 Page 2 of 2
Insert 4 wood dowels into pre-drilled holes on
crossbar, and gently tap the wood dowels if
necessary. Attach side panels and crossbar by
aligning wood dowels and holes in side panel.
NOTE: 2 large holes on crossbar should face
upward.
With the assistance of another adult, align holes
in side panels with corresponding wood dowels
in top panel.
cleaning & care
Wipe up spots and spills immediately. Dust with soft
dry cloth. Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished with a
protective clear lacquer.
Paste the pads to the bottom of side panel.
With the assistance of another adult, carefully
turn the table/bench to its upright position.
Assembly is now complete.
long bolts
short bolts
large holes on
crossbar should
face upwards
A. Secure side panels with 4 long bolts, 4 spring
washers and 4 large flat washers as shown,
using an allen wrench.
B. Secure crossbar with 2 short bolts, 2 spring
washers and 2 small flat washers.
A
B
A
B
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
sandbar COFFEE TABLE/BENCH